The analysis of lubricating oil additives by supercritical fluid chromatography with packed and open tubular capillary columns

Lubricating oil additives have been analyzed by supercritical fluid chromatography on open tubular and packed capillary columns. Carbon dioxide and modified carbon dioxide were used as mobile phases and detection was accomplished by flame ionization and micro UV. Rapid and efficient analysis of the lubricating oil additives was demonstrated.     

HPLC-separation of cis and trans monounsaturated fatty acids

Summary The chromatography of monounsaturated fatty acids as their methyl esters on silver nitrate-loaded HPLC-columns has been studied. The separation of cis- and trans-isomers was easily achieved even with columns of low performance. High-performance small-particle-columns treated with silver nitrate separated a large variety of monounsaturated cis and trans positional isomers. The influence of variable silver-loads on the selectivity of the system was studied and a survey of the distribution of positional trans C₁₈₁ isomers in commercial margarines is given.     

Microcolumn ion chromatography with conductimetric detection

Summary A miniaturized flow cell for an electrical conductivity detector has been made and applied to the ion chromatography of inorganic anions. It consisted of stainless steel tubes (0.13 mm ID×0.31 mm OD) and PTFE tubes (0.25 mm ID×2 mm OD). The detection limit for chloride at S/N=3 was 36 pg or 0.33 ppm for a 0.11 l injection.     

Deactivation of fused silica capillary columns with cyanopropylhydrosiloxanes

A method is described for surface deactivation and modification of fused silica capillary columns with a cyanopropyl-containing reagent. The deactivation procedure involved a dehydrocondensation reaction between a bis(cyanopropyl)methylhydropolysiloxane reagent and surface silanol groups at an optimum temperature of only 250°C. Actual critical surface tension measurements were made using the capillary rise method. Excellent deactivation for acidic and basic compounds at the low ng level, and wettability for nonpolar and polar polysiloxane stationary phases were obtained. A procedure was developed to remove acidic impurities that are present in polar stationary phases.     

Characteristics of an amperometric detector for capillary HPLC

The main characteristics of a dual-electrode amperometric detector with a cell of the “cylinder-in-flow” type with a working wire electrode have been investigated. The effective cell volume is 10–40 nl in a system with 0.2–0.4 mm i.d. packed fused-silica columns. Extra-column spreading at the optimum elution rate does not exceed 0.005 μl². The linear range is 10³ at a relative standard deviation of 0.009. The low noise level (2–3 pA) facilitates determination of electro-active substances. The detection limit for catecholamines is of the order of tenths of a femtomole.     

An investigation of microbore reverse-phase columns containing 3 μm packing materials

A procedure for packing 15 cm × 1 mm id reverse-phase microbore columns with 3 μm silicas obtained from different manufacturers is described. The speed of analysis and detection limits are compared to those obtained with a 50 cm × 1 mm id column packed with 10 μm ODS. The effect of detector time constant on the system, and flow rates on column efficiency are also examined.     

OH-terminated cyanopropyl silicones

Due to their high polarity and unique selectivity, cyanopropyl silicones are basic stationary phases for high resolution capillary gas chromatography. Different OH-terminated cyanopropyl silicones, containing a high cyanopropyl content, were synthesized and chromatographically evaluated. Special attention was paid to the degree of immobilization of the phases in FSOT columns. Depending on the problem at hand, a choice has to be made between immobilization and maximum selectivity.     

Optimization of an electrolytic conductivity detector for determination of toxic nitrogen-containing food contaminants separated by open tubular column gas chromatography

The combination of open tubular column gas chromatography with electrolytic conductivity detection has been evaluated for the determination of nitrogen-containing pesticide residues in food extracts. Optimization of the column position at the column-detector interface was crucial to the successful operation of the detector. The signal-to-noise ratio and response stability of the detector are greatly influenced by the composition of the electrolyte solvent. Large volume splitless injections using retention gaps and optimized detector operating conditions enabled pesticide residues in food extracts to be determined at sub parts-per-million levels. Although the electrolytic conductivity detector is less sensitive than the thermionic ionization detector, its greater nitrogen selectivity can he crucial to the determination of nitrogen-containing contaminants in food extracts, particularly in complex mixtures where phosphorus-containing contaminants or matrix compounds are also present.     

The use of silicon in the preparation of apolar glass capillary columns

As an extention of previous reports, variables affecting the performance of columns modified by silicon deposition have been optimized. The aim of this work was to produce thermostable apolar glass capillary columns regardless of the glass type used and to maintain column performance under stressful conditions. The main parameters studied were the influence of glass type, leaching effects, and silicon layer thickness on column activity. Deactivation and stationary phase conditions were held constant. Both coated and uncoated columns were tested. The thickness of the silicon layer was found to be relatively unimportant. There was no difference whether soft glass or borosiiicate glass was used and leaching before silicon deposition did not influence column activity. Bare silicon surfaces showed considerable activity especially in respect to interactions with free acids and bases. There are indications that the surface consists of silicon oxide and other oxygenated forms of silicon rather than of the element. Treatment of the silicon layers with dilute hydrofluoric acid and the strict exclusion of traces of oxygen and water did not improve the situation. In spite of such specific interactions, silicon surfaces were easily deactivated by heat treatment with polysiloxanes. Silicon surfaces deactivated by baking with octamethyltetrasiloxane at 400°C are inert and temperature stable and show characteristics similar to persilylated surfaces.     

Packed capillary column supercritical fluid chromatography of fat-soluble vitamins using liquid crystal polysiloxane coated particles

Summary Liquid crystal polysiloxane stationary phases were prepared by coating two different polymers on deactivated porous silica particles (10 m diameter, 80 Å pores). Deactivation of the silica particles before coating was necessary to prepare highly efficient and inert stationary phases for supercritical fluid chromatography (SFC). Fat-soluble vitamins E, A, K₁, K₂, D₂, and D₃ were separated on these columns using neat supercritical CO₂ as mobile phase. The analyses were completed within 40 min at 70 °C. The results were compared to those obtained using a capillary column packed with less ordered liquid crystalm,m-cyanobiphenyl-substituted polysiloxane coated particles. Reduced shape selectivity was observed with this cyanobiphenyl phase. The response factors of vitamins A, E, K₁, K₂, D₂, and D₃ when using the flame ionization detector (FID) were determined to be very similar.