Hydrides with the perovskite structure: General bonding and stability considerations and the new representative CaNiH3

The stability and electronic structure of perovskite hydrides ABH₃ were investigated by means of first-principles density functional calculations. Two types of perovskite hydrides are distinguished: (1) When A and B are alkali and alkaline earth metals, the hydrides are ionic compounds with calculated band gaps of around 2 eV and higher. Their stability trend follows basically the concept of Goldschmidt's tolerance factor. (2) When A is one of the heavier alkaline earth metals (Ca, Sr, Ba) and B a transition metal, stable compounds ABH₃ result only when B is from the Fe, Co, or Ni groups. This stability trend is basically determined by effects associated with d band filling of both the transition metal and the hydride. In contrast to group (1) perovskites, the transition metal-containing compounds are metals. The synthesis of CaNiH₃ and its structure determination from CaNiD₃ is reported. This compound is a type (2) perovskite hydride with a fully occupied hydrogen position (CaNiD₃: a=3.551(4) Å, d_Ni-D=1.776(2) Å). Its stability is discussed with respect to transition metal hydrides with complex anions (e.g., Mg₂NiH₄, Na₂PdH₂, Sr₂PdH₄).     

Development in the area of UV-crosslinkable solvent-based pressure-sensitive adhesives with excellent shrinkage resistance

Solvent-based UV-crosslinkable pressure-sensitive adhesives (PSA) present a new class of products that offers the potential to produce a novel generation of ultraviolet cured self-adhesive products with excellent shrinkage resistance. A variety of solvent-based pressure-sensitive adhesives were prepared by synthesis in ethyl acetate with solid content on 50 wt.% with 2-ethylhexyl acrylate, methyl acrylate, acrylic acid, N-vinyl caprolactam and unsaturated photoinitiators: 4-acryloyloxy benzophenone, allyl benzoine and phenyl-(1-acryloyloxy)-cyclohexyl ketone. The main emphasis is given to the influence of viscosity and molecular mass of synthesized adhesive on their shrinkage. Further trials show the effect of the UV-crosslinking process with UV-lamp and comparison with acrylics PSA crosslinked with metal chelates aluminium acetylacetonate and titanium acetylacetonate on shrinkage. Further examinations describe the influence of various factors such as UV exposure time and UV dose on very relevant PSA performance such as shrinkage on coated PVC carrier.     

Cadmium colloids from non-aqueous solvents

Cadmium colloids have been prepared by Chemical Liquid Deposition (CLD). The metal is evaporated to yield atoms which are solvated at liquid nitrogen temperature, and upon warming, stable liquid colloids are formed with particle size ranging between 25–100 Å. Zeta potentials were calculated according to the conversion of Hunter and the Hückel equation, for ethanol and dimethyl sulphoxide. UV/VIS measurement of most of the black colloids showed absorption band around 280 nm. For comparison, we prepared CdS colloid with size 400–625 Å. The colloids are stable to oxidation in air and/or oxygen bubbling. The synthesis of colloids and films from Cd with acetone, 2-butanone, ethanol, 2-propanol, 2-methoxyethanol, DMF and DMSO is reported. Transmission Electron Microscopy (TEM) allows us to determine particle size.     

Emission band shape probes of the mixed-valence excited state properties of polypyridyl-bridged bis-ruthenium(II) complexes

The absorption spectra and emission spectral band shapes of several polypyridine-ligand (PP) bridged bis-ruthenium(II) complexes imply that the Ru(II)/Ru(III) electronic coupling is weak in their lowest energy metal to ligand charge transfer (MLCT) excited states. Many of these PP-bridging ligands contain pyrazine moieties and the weak electronic coupling of the excited states contrasts to the strong electronic coupling inferred for the correlated mixed-valence ground states. Although the bimetallic complexes emit at significantly lower energy than their monometallic analogs, the vibronic contributions to their 77 K emission spectra are much stronger than expected based on comparison to the monometallic analogs (around twofold in some complexes) and this feature is characteristic of bimetallic complexes in which the mixed-valence excited states are electronically localized. The weaker excited state than ground state donor/acceptor electronic coupling in this class of complexes is attributed to PP-mediated super-exchange coupling in which the mediating orbital of the bridging ligand (PP-LUMO) is partly occupied in the MLCT excited states, but is unoccupied in the ground states; therefore, the vertical Ru(III)-PP⁻ (MLCT) energy is larger and the mixing coefficient smaller in these excited states than is found for Ru(II)-PP in the corresponding ground states.     

Chains, ladders and sheets of d metal–organic polymers generated from the flexible bipyridyl ligands

By use of the three-layer diffusion method, reactions of flexible bipyridyl ligands (4,4′-bpp or 3,3′-bpp) with M(II) salts (M = Zn, Cd) and multi-carboxylate ligands resulted in the formation of four interesting d¹⁰ metal–organic coordination polymers: [Zn(μ-4,4′-bpp)Br₂]_n (1), [Zn(μ-4,4′-bpp)(1,2-bdc)]_n · nH₂O (2), [Zn(μ-3,3′-bpp)(1,3-bdc)]_n · nCH₃OH · 2nH₂O (3) and [Cd(μ-3,3′-bpp)(C₄H₂O₄)]_n · 3nH₂O (4) (4,4′-bpp = 2,2′-bis(4-pyridylmethyleneoxy)-1,1′-biphenylene; 3,3′-bpp = 2,2 ′-bis(3-pyridylmethyleneoxy)-1,1′-biphenylene; bdc=benzenedicarboxylate, C₄H₄O₄ = fumaric acid). Complex 1 has a 2D sheet structure consisting of two unusual zigzag Zn(II) chains which are nearly perpendicular to each other. Complex 2 is comprised of two-leg ladders, in which [Zn(4,4′-bpp)] chains serve as the side rails and 1,2-bdc ligands serve as the cross rungs. In complex 3, every two 1,3-bdc ligands connect the neighbouring Zn(II)-3,3′-bpp dimetallic rings in η¹ coordination modes into an interesting chain structure. Complex 4 consists of an anionic macrocycle-containing cadmium dicarboxylate sheets that are separated by 3,3′-bpp. These d¹⁰ metal complexes exhibit high thermal stabilities and strong luminescence efficiencies.     

A study of the mechanisms involved in the separation of metal ions with a mixed-bed stationary phase

Summary The optimization of chromatographic methods for the determination of metal species require an understanding of the mechanisms involved. In this work, the separation of Cd, Co, Cu, Fe(II/III), Mn, Pb and Zn using a mixed bed column (IonPac CS5A) and a cation-exchange column (IonPac CS2) is studied as a function of mobile phase composition. The type and concentration of complexing agent and of ionic strength modificators were evaluated. The charge of analytes were calculated using the classical ion exchange approach to highlight the effect of eluent composition on retention. The comparative study enabled us to identify an optimal eluent composition for the separation of the nine metal species.     

Mass transfer determining parameter in facilitated transport through di-(2-ethylhexyl) dithiophosphoric acid activated composite membranes

Activated composite membranes (ACMs) containing di-(2-ethylhexyl) dithiophosphoric acid (D2EHDTPA) as a carrier have been found to facilitate the transport and separation of several cations. This paper describes an approach to the chemical characterisation of the transport phenomena of Zn²⁺, Cd²⁺, Cu²⁺, Ni²⁺, Sn²⁺ and In³⁺ by an ACM. The selectivity of D2EHDTPA based ACM towards different metal ions is presented and discussed focusing in Zn²⁺ and Cd²⁺ transport and recovery. Selectivity demonstrates that zinc ions are removable from mixtures due to the different extraction strength of D2EHDTPA. Such selectivity is based on the differences of the dynamic behaviour of the metal ions transport. In addition, a correlation of the chemical behaviour of those ACM systems with the corresponding solvent extraction systems has been found.     

Analysis of Equilibrium and Kinetics of Chromium-Fluoride Complexation from Spectroscopic Data via Chemometrics Methods

IntroductionStudies on reversible kinetic systems are consi-dered as a hotspot of chemical and biochemical kineticresearches[1,2]. Of late, some researches have been fo-cused on the simultaneous optimization of the obverseand reverse rate constants[3,4].H…     

Ureasulfonamide Polymeric Sorbent for Selective Mercury Extraction

Summary. A new polymeric resin with sulfonamide pendant functions has been prepared for the selective extraction of mercuric ions. This polystyrene sulfonamide urea resin with a 3.5 mmol/g total nitrogen content is able to selectively sorb mercury from aqueous solutions. The mercury sorption capacity of the resin is around 1.60 mmol/g under non-buffered conditions. The experiments performed under identical conditions with some metal ions reveal that Cd(II), Pb(II), Zn(II), and Fe(III) ions are also extractable in low quantity (0.05–0.1 mmol/g). The sorbed mercury can be eluted by repeated treatment with hot acetic acid without hydrolysis of the amide groups.