环境友好助洗剂——4A沸石

介绍了4A沸石的结构、性质及其作为洗涤助剂等方面的应用和国内外发展状况。     

Carbon nanotube assisted synthesis of CeO2 nanotubes

CeO₂ nanotubes have been synthesized facilely using carbon nanotubes (CNTs) as templates by a liquid phase deposition method. The properties of the CeO₂ nanotubes were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectrum (XPS) as well as thermogravimetry and differential thermal analysis (TG-DTA). The obtained CeO₂ nanotubes with a polycrystalline face-centered cubic phase have a uniform diameter ranging from 40 to 50 nm. The CeO₂ nanotubes are composed of many tiny interconnected nanocrystallites of about 10 nm in size. The pretreatment of CNTs and calcination temperature were confirmed to be the crucial factors determining the formation of CeO₂ nanotubes. A possible formation mechanism has been suggested to explain the formation of CeO₂ nanotubes.     

WHOLLY-AROMATIC THERMOTROPIC LIQUID CRYSTALLINE POLYMER AND ITS BLOCK COPOLYMER

A wholly-aromatic thermotropic liquid crystalline polymer (WATLCP) composed ofp-hydroxybenzoic acid (HBA), 4,4'-dihydroxy bisphenyl (BP), terephthalic acid (TPA),m-phthalic acid (MPA) was synthesized. It was symbolized by BP-LCP. Using a simi-lar method, a new copolymer BP-PSF was prepared. BP-PSF has a semi-flexible chainpolysulfone and a rigid-rod chain like BP-LCP. By FT-IR, polarizing microscope and DSCtechnique, the structures and properties of BP-LCP and BP-PSF were studied.     

胶束增溶(增敏)配合体系的高效液相色谱研究 Ⅴ.Fe、Co、Pd-3,5-diBr-PADAT-SLS 体系

本文用反相高效液相色谱法研究了铁、钴,钯-3,5-diBr-PADAT-SLS体系。在pH5.5的HAc-NaAc介质中,七种金属离子可与试剂生成配合物。用Spherisorb 5 ODS柱,含有4.02×10~(-2)mol/L KCl和0.06mol/L pH3.0HAc-NaAc甲醇/乙腈/水(83/0.5/16.5)溶液作为流动相,分离出了Fe~(2+)、Co~(2+)和Pd~(2+)配合物。对分离机理进行了初步研究。建立了铁、钴、钯的同时测定的HPLC-光度法。用于对虾饵料中铁、钴的测定,结果令人满意。     

Liquid–solid disk extraction followed by supercritical fluid elution and gas chromatography of phenols from water

A method combining the techniques of liquid – solid disk extraction (LSDE) and supercritical fluid elution (SFE) has been developed for the phenols regulated by the Clean Water Act. LSDE uses a disk or membrane made of polytetrafluoroethylene (PTFE) fibrils impregnated with small particles, e.g. styrene divinylbenzene (SDB) resin, to extract phenols from water. After disk extraction the retained analytes are eluted from the disk using SFE. SFE is used as an alternative to liquid solvent elution with an organic solvent. Analytes are separated, identified, and quantified using gas chromatography – ion trap detector mass spectrometry (GC-ITDMS). The method is capable of sub parts per billion detection limits, and precision of 5–28% RSD. Evaluation of various disks or membranes, such as C₁₈-silica disks, SDB disks, and ion exchange membranes, has also been performed for the extraction of phenols from water. The results obtained from the in-situ aqueous acetylation of phenols and extraction of their acetates are quantitative. The utilization of LSDE and SFE techniques has proven to be a more effective approach than liquid – liquid extraction in minimizing air pollution and solvent waste.     

Depolymerization and ionic conductivity of enzymatically deproteinized natural rubber having epoxy group

Preparation of liquid epoxidized natural rubber (ENR) was made by oxidative depolymerization of ENR in latex stage without loss of epoxy group. Epoxidation of fresh natural rubber latex, which was purified by deproteinization with proteolytic enzyme and surfactant, was carried out with freshly prepared peracetic acid. The glass transition temperature (T_g) and gel content of the rubbers increased after the epoxidation, both of which were dependent upon an amount of peracetic acid. The gel content was significantly reduced by oxidative depolymerization of the rubber with (NH₄)₂S₂O₈ in the presence of propanal. The resulting liquid epoxidized rubber (M_n≈10⁴) was found to have well-defined terminal groups, i.e. aldehyde groups and α-β unsaturated carbonyl groups. The novel rubber was applied to transport Li⁺ as an ionic conducting medium, that is, solid polymer electrolyte.     

Rapid analysis of triterpenic acids by liquid chromatography using porous graphitic carbon and evaporative light scattering detection

An original system which uses Porous Graphitic Carbon as support and a mixture of organic solvents as mobile phase is proposed for the analysis of triterpenic acids by liquid chromatography. The separation of betulinic acid, ursolic acid, oleanolic acid, and 18alpha- and 18beta-glycyrrhetinic acids was carried out within a short time and monitored by evaporative light scattering detection as universal detection method. Molecular modelling studies show that the main contribution to the selectivity comes from the electrostatic interaction characterised by the dipole moment of the products.     

INFLUENCE OF BACKBONE RIGIDITY ON THE LIQUID CRYSTALLINITY OF MESOGEN-CONTAINING POLYACETYLENES

Two acetylene polymers containing cyanobiphenyl-based mesogens,poly { 10-[ ((4'- cyano-4-biphenylyl ) oxy ) carbonyl] - 1 -decyne } (PA8CN ), which has a relativelyfiexible polyalkyne backbone, and poly {[4-(((12-((4'-cyano-4-biphenylyl)oxy)dodecyl)oxy)carbonyl) phenyl]-acetylene} (PB12CN), which has a fairly rigid poly (phenylacetylene )backbone, were synthesized using respectively WCl_6 and [Rh(nbd)Cl]_2 as the catalysts.PA8CN exhibits enantiotropic interdigitated smectic A phase (S_(Ad)) over a temperaturerange as wide as ca. 100℃, whereas PB12CN is non-mesomorphic, demonstrating thatthe backbone rigidity plays an important role in determining the liquid crystallinity of thepolyacetylenes.     

Ferromagnetically coupled heterobinuclear Cu(Ⅱ)-Ln(Ⅲ) complexes with N,N''''-bis(2-aminoethyl)-oxamido dianion as a bridged ligand

Six novel μ-oxamido heterobinuclear complexes, namely Cu(oxae)Ln(Me2bpy)2-(ClO4)3 (Ln=La, Nd, Gd, Tb, Ho, Er), where oxae denotes N, N'-bis(2-aminoethyl)oxamido dian-ion, Me2bpy is 4,4'-dimethyl-2,2'-bipyridyl, have been synthesized and characterized by elemental analyses, IR, conductivity measurements and electronic spectra. The temperature dependence of the magnetic susceptibility of Cu(oxae)Gd(Me2bpy)2(ClO4)3 has been meaured over the range 4-300 K. The least-squares fit of the experimental susceptibilities yielded J - 1.87 cm-1.The observed Gd(Ⅲ)-Cu(Ⅱ) coupling is ferromagnetic. One plausible mechanism that can cause a ferromagnetic coupling between Gd(Ⅲ) and Cu(Ⅱ) is discussed in terms of spin-polarization.