Dynamics of trailing vortices in the wake of a generic high-speed train

The three-dimensional dynamics of a pair of counter-rotating streamwise vortices that are present in the wake of an ICE3 high-speed train typical of modern, streamlined vehicles in operation, is investigated in a 1/10th-scale wind-tunnel experiment. Velocity mapping, frequency analysis, phase-averaging and proper orthogonal decomposition of data from high-frequency multi-hole dynamic pressure probes, two-dimensional total pressure arrays and one-dimensional multi-hole arrays was performed. Sinusoidal, antisymmetric motion of the pair of counter-rotating streamwise vortices in the wake is observed. These unsteady characteristics are proposed to be representative of full-scale operational high-speed trains, in spite of the experimental limitations: static floor, reduced model length and reduced Reynolds number. This conclusion is drawn from favourable comparisons with numerical literature, and the ability of the identified characteristics to explain phenomena established in full-scale and scaled moving-model experiments.     

Application of Graphene as a Sorbent for Simultaneous Preconcentration and Determination of Trace Amounts of Cobalt and Nickel in Environmental Water and Vegetable Samples

A new method using a column packed with graphene as adsorbent was developed for the preconcentration of trace amounts of cobalt (Co) and nickel (Ni) prior to their determinations by flame atomic absorption spectrometry. Several factors influencing the extraction efficiency of Co and Ni and their subsequent determinations, such as pH, amounts of the chelating agent, flow rates of sample and eluent solution, eluent type and its volume, breakthrough volume, and adsorption capacity were established. Under the optimum conditions, the calibration graphs were linear in the range of 4.0‐200.0 μg L^?1 and 5.0‐200.0 μg L^?1 with detection limits of 0.36 μg L^?1 and 0.51 μg L^?1 for Co and Ni, respectively. Good relative standard deviations for ten determinations of 100.0 μg L^?1 of Co and Ni were 3.2 and 3.6%, respectively. The results for determination of Co and Ni in tap water, river water, sea water, vegetable and spiked samples have demonstrated the accuracy and applicability of the proposed method. To validate the proposed method, three certified reference materials of environment water (GSBZ 50030‐94 and GSB 07‐1186‐2000) and tomato leaf (GSBZ 51001‐94) were analyzed, and the determined values were in good agreement with the certified values.     

BGK states from the bump-on-tail instability

Numerical computations are presented of the BGK-like states that emerge beyond the saturation of the bump-on-tail instability in the Vlasov-Poisson system. The stability of these states towards subharmonic perturbations is explored in order to gauge whether the primary bump-on-tail instability always suffers a secondary instability that precipitates wave mergers and coarsening of the BGK pattern. Because the onset of the bump-on-tail instability occurs at finite wavenumber, and the spatially homogeneous state is not itself unstable to spatial subharmonics, it is demonstrated that mergers and coarsening do not always occur, and the dynamics displays a richer spatio-temporal complexity.     

Viscous flow in a mixed compression intake

Numerical simulation of the flow in a two‐dimensional mixed compression intake is carried out by solving unsteady viscous compressible equations using a stabilized finite element method. The effect of bleed in starting/unstarting of the intake and controlling the buzz instability is investigated in detail. Higher bleed leads to an increase in the ability of the intake to sustain larger back‐pressure for stable operation. The amount of bleed and its location is varied to understand its effect on the performance of the intake. Two kinds of unsteady oscillations are observed: ‘little’ and ‘big’ buzz. The frequency of the both kinds of buzz oscillations is found to be super‐harmonic of the fundamental acoustic frequency of intake modeled as an open‐closed organ pipe. The frequency as well as amplitudes of the big buzz cycles is larger than those of the little buzz. The little‐ and big‐buzz are found to occur for low‐ and high‐subcritical state of the intake and are very similar to Ferri and Dailey criteria, respectively. Buzz is eliminated when relatively high bleed is implemented, both, upstream and downstream of the throat. The effect of rate of change of back‐pressure on the start/unstart of the intake is investigated. Two situations are considered. The first case is that of an intake where the back‐pressure remains below the critical value. It is found that the intake remains started if the change in back‐pressure is gradual. However, it unstarts if the back‐pressure is changed relatively rapidly. The second set of simulations is an attempt to model the situation where the back‐pressure at the exit of the intake exceeds the critical value and a logic is incorporated in the feed back loop of the fuel modulation to start the intake. Low rate of change of pressure is unsuccessful in starting the intake. Relatively high rates result in either a quick starting of the intake or a slow unstart. Copyright © 2010 John Wiley & Sons, Ltd.     

Formation of Concentrated Nanoemulsions by Extreme Shear

Abstract

We have systematically investigated the production of “nanoemulsions,” droplets of one liquid phase in another immiscible liquid phase that have diameters less than 100 nm. Our approach relies on a combination of extreme shear due to multipass, high‐pressure microfluidic injection and systematic control of the emulsion's composition. By repeatedly shearing a silicone oil‐in‐water emulsion in an inhomogeneous extensional shear flow, the multipass approach enables us to reduce the droplet polydispersity and average radius. Using dynamic light scattering, we study the changes in the average radius, ?a?, as a function of the number of passes, driving injection pressure (i.e., shear rate), droplet volume fraction, surfactant concentration, and droplet oil viscosity. The smallest nanoemulsion that we obtain has ?a?=18 nm. At large droplet volume fractions φ≥0.65, we observe phase inversion, rather than a reduction in the droplet size. This provides evidence that droplet coalescence can occur during extreme shear, even when a significant excess of a strongly stabilizing surfactant is present.     

Simultaneous derivatization and air-assisted liquid–liquid microextraction of some aliphatic amines in different aqueous samples followed by gas chromatography-flame ionization detection

The paper presents a new method based on simultaneous derivatization and air-assisted liquid–liquid microextraction (AALLME) for the extraction and preconcentration of some aliphatic amines prior to gas chromatography-flame ionization detection (GC-FID). Primary aliphatic amines are derivatized and extracted simultaneously by a fast reaction with butylchloroformate (derivatization agent/extraction solvent) under mild conditions. The mixture of butylchloroformate and aqueous sample solution is rapidly sucked into a 10-mL glass syringe and then is injected into a test tube with conical bottom and the procedure is repeated seven times. After centrifuging the resulted cloudy solution, the derivatized analytes in the sedimented phase are determined by GC-FID. The influence of main factors on the efficiency of derivatization/extraction procedure is studied. Under the optimal conditions, the enrichment factors (EFs) for aliphatic amines are obtained in the range of 248–360 and limits of detection (LODs) are between 0.30 and 2.6 μg L⁻¹. The obtained extraction recoveries ranged from 50 to 72% and the relative standard deviation (RSD) was less than 4.8% for intra-day (n = 6) and inter-days (n = 4) precision. The method is successfully applied to determine some aliphatic amines in environmental water samples.     

Determination of Hg(II) in Environmental Water Samples by Dispersive Liquid Phase Microextraction Combined with Flame Atomic Absorption Spectrometry

In this study, a method of dispersive liquid phase microextraction combined with the flame atomic absorption spectrometry was proposed for the determination of trace Hg using diphenylthiocarbazone as chelating reagent. Several factors which have effect on the microextraction efficiency of Hg, such as pH, extraction and dispersive solvent type and their volume, concentration of the chelating agent, extraction time were investigated, and the optimized experimental conditions were established. After extraction, the enrichment factor was 68. The detection limit of the method was 45 ng mL^?1, and the relative standard deviation for eight determinations of 2 μg mL^?1 Hg was 1.7%. The results for the determination of Hg in environmental water samples (tap water, well water, mineral water and Caspian sea water) have demonstrated the applicability of the proposed method.     

Unsaturated polyester resins modified with phosphorus-containing groups: Effects on thermal properties and flammability

A novel reactive phosphorus-containing monomer [1-oxo-2,6,7-trioxa-1- phosphabicyclo-[2.2.2]octane-methyl diallyl phosphate, PDAP] was synthesized, and various amounts of PDAP were combined with unsaturated polyester by radical bulk polymerization. The resulting flame-retardant unsaturated polyester resin (FR-UPR) samples were investigated by thermogravimetric analysis (TGA), microscale combustion calorimetry (MCC), and limiting oxygen index (LOI) tests. Due to the relatively high phosphorus content of PDAP (18.2 wt%), incorporation of this monomer into unsaturated polyester resin (UPR) led to a marked decrease in the heat release capacity (HRC), the total heat release (THR), an increase in the LOI and the char yield upon combustion. In order to elaborate the interactions between the UPR and PDAP in degradation, differences between the experimental and theoretical mass losses of a FR-UPR sample were evaluated. Furthermore, thermogravimetry-Fourier transform infrared (TG-FTIR) and real-time Fourier transform infrared (RTIR) spectroscopy were employed to investigate the degradation behavior of UPRs, providing insight into the degradation mechanism.