一种新的珍珠层厚度测量方法

珍珠层厚度是是珍珠价值最主要的衡量指标之一,目前珍珠层厚度的无损测量方法主要采用光学相干层析成像技术和X射线技术。光学相干层析成像技术在实际测量时精度较低。在研究X射线测量原理的基础上,提出了一种新的珠层厚度测量方法。首先介绍了灰度图像的边缘识别算法和珍珠核、珍珠外圆度拟合算法,其次提出了一种引入对照机制的珍珠层测量算法,最后还对算法的误差进行了分析,算法的误差可以控制在0.02%以内。实际的测量也验证了本测量方法具有很高的精度。     

On edge connectivity and parity factor

By Petersen's Theorem, a bridgeless cubic graph has a 2-factor. Fleischner(Discrete Math.,101, 33–37(1992)) has extended this result to bridgeless graphs of minimum degree at least three by showing that every such graph has an even factor without isolated vertices. Let me 0 be even and mo 0 be odd. In this paper, we prove that every m e-edge-connected graph with minimum degree at least me + 1 contains an even factor with minimum degree at least m e and every(m o + 1)-edge-connected graph contains an odd factor with minimum degree at least m o, which further extends Fleischner's result. Moreover, we show that our results are best possible.     

Construction of a portable sample preparation device with a magnetic poly(methacrylic acid‐co‐ethylene dimethacrylate) monolith as the extraction medium and its application in the enrichment of UV filters in water samples

A portable sample preparation device with a magnetic polymer monolith as the extraction medium was constructed. The monolith was synthesized by polymerizing methacrylic acid and ethylene dimethacrylate around a cylindrical magnet. In this way, the monolith with a magnetic core could be readily attached to the extraction device by magnetism. The constructed device was evaluated for the enrichment of UV filters in water samples, followed by high‐performance liquid chromatographic analysis. The extraction efficiency for the targets was satisfactory with no matrix interference. Good linearities were obtained for the UV filters with the correlation coefficients >0.9986. The limits of detection and quantification for the UV filters were 0.3–0.8 and 1.0–2.4 ng/mL, respectively. The recoveries of the UV filters from the spiked water samples at the concentration of 100 ng/mL were 95.3–101.7%, with relative standard deviations <10%. Accordingly, the proposed portable device was demonstrated to be suitable for on‐site simultaneous sampling, purification, and preconcentration within a single step.     

Determination of cysteine,homocysteine, cystine,and homocystine in biological fluids by HPLC using fluorosurfactant‐capped gold nanoparticles as postcolumn colorimetric reagents

We have demonstrated for the first time the suitability of fluorosurfactant‐capped spherical gold nanoparticles as HPLC postcolumn colorimetric reagents for the direct assay of cysteine, homocysteine, cystine, and homocystine. The success of this work was based on the use of an on‐line tris(2‐carboxyethyl)phosphine reduction column for cystine and homocystine. Several parameters affecting the separation efficiency and the postcolumn colorimetric detection were thoroughly investigated. Under the optimized conditions, cysteine, homocysteine, cystine, and homocystine in human urine and plasma samples were determined. Detection limits for cysteine, homocysteine, cystine, and homocystine ranged from 0.16–0.49 μM. The accuracy in terms of recoveries ranged between 94.0–102.1%. This proposed method was rapid, inexpensive, and simple.     

Aspects of trapping efficiency and matrix effects in the development of a restricted‐access‐media‐based trap‐and‐elute liquid chromatography with mass spectrometry method

Online restricted access media with liquid chromatography and tandem mass spectrometry for the direct analysis of small molecules in biological fluids represents an interesting alternative to time‐demanding traditional sample preparation techniques. In this study, important considerations concerning the development of a restricted access media with liquid chromatography and tandem mass spectrometry method for the analysis of dansylated estrogens in biological matrix are presented. Parameters influencing peak tailing and trapping efficiency were evaluated. The key factors included the ion strength of the mobile phase, a loading flow rate of the sample onto the trap column, and selection of a proper stationary phase of the trap column for a given set of analytes. These parameters have proven to be essential for minimizing any unwanted chromatographic peak tailing. The bulk derivatization of the analytes in the biological fluids and its relationship to the observed matrix effects was evaluated as well.     

Impact resistance analysis of flexible fabric by 3D shape of impact basin in low-speed impact test

Hopkinson non-penetrating low-speed impact test was carried out on Kevlar flexible fabrics. The impact basin was formed by the clay on the back of the fabric, and the ultimate deformation of the fabric was recorded completely. The 3D shape of the clay impact basin was measured by fringe projection profilometry and converted into the impact basin volume. At the same time, the relationship between the indentation volume and the deformation energy of the clay was calibrated using the clay intrusion test. The clay impact basin volume is then converted into the residual energy of the flexible fabric subjected to the low-speed impact, and a new index of the impact basin volume is established to evaluate the energy absorption efficiency of fabric under the low-speed impact. Finally, combined with the deformation of single-layer fabric, the stress wave propagation in the impact deformation process of fabric is discussed, which is helpful to understand the impact energy absorption mechanism of flexible fabric.     

Numerical and empirical modeling of peak deceleration and stress analysis of polyurethane elastomer under impact loading test

In this work, we present the modeling of the peak deceleration (PD) using data of the experimental drop test. Specimens with different thicknesses and areas tested in the drop test device which has adaptable height and weight. In the empirical modeling of the PD, the thickness, area, drop mass and drop height considered as separable functions. An analytical model and Neural Network (NN) was used as the empirical models. Further, the stress on the material was calculated using differential equations and the Finite Element Method (FEM). The Obtained PD from the experimental test, analytical and NN models was converted to the stress on the material using a derived differential equation. Finally, the best model for analyzing the PD and Stress on the material was presented.     

Low velocity impact response of flax/polypropylene hybrid roving based woven fabric composites: Where does it stand with respect to GRPC?

Flax-PP based thermally bonded roving (TBR) has a unique structure where the flax fibres remain twist-free and fully aligned along the roving axis. The present study describes an experimental investigation on the low velocity impact (LVI) behaviour of the TBR based woven fabric composites and compares the same with plain woven glass fabric reinforced PP composites (GRPC). Two different fabric architectures namely plain woven (PW) and unidirectional (UD) are fabricated using flax/PP based TBR. These TBR based woven fabrics and the glass fabric/PP sheets are consolidated in a compression moulding machine and the resultant composite-laminates are tested for their LVI behaviour. The impact test results revealed that the glass/PP composites absorb more energy and exhibit a higher peak load than both TBR based PW and UD fabric composites. However, the specific load and energy of all flax/PP composites are higher than the glass/PP composite. The damage tolerance of all composite laminates are evaluated by comparing their flexural strength before and after the impact. It is observed that the proportionate loss in flexural strength due to impact thrust is larger in case of glass/PP composites than all flax-PP composites.     

Comparison of low-velocity impact damage in thermoplastic and thermoset composites by non-destructive three-dimensional X-ray microscope

This paper presents a method for the non-destructive inspection and quantitative comparison of low-velocity impact damage in thermoplastic and thermoset composites. X-ray microscope (XRM) computed tomography is used to analyse the three-dimensional internal damage in carbon fibre/poly-ether-ether-ketone (AS4/PEEK) and carbon fibre/epoxy (CCF300/Epoxy) laminates. With the materials and testing conditions used, it was shown that thermoplastic composites have better interlaminar and intralaminar properties, and the following quantitative conclusions were drawn. Under the same impact energy, the maximum contact force of AS4/PEEK laminate was approximately twice that of CCF300/Epoxy laminate. Dissection of the reconstructed XRM volume along a characteristic slicing surface showed that AS4/PEEK had less internal damage than CCF300/epoxy. When the impact energy was 15 J, the XRM results showed that the sum of delamination areas between each ply in AS4/PEEK was only 9% of that in CCF300/Epoxy, whereas the ultrasonic C-scan results showed that the total delamination area of AS4/PEEK was 54.78% of that of CCF300/Epoxy.     

Identification and Characterization of 4-Hydroxy-2H-1,2-benzothiazine-3-carboxylic Acid 1,1-Dioxide Derivatives by Mass Spectroscopy

Electron impact mass spectral fragmentation of certain esters and amides derived from 4-hydroxy-2H-1,2-benzothiazine-3-carboxylic acid 1,1-dioxide is described. Common ions to both series may be observed, as well as others allowing them to be differentiated. The method is promissory for identification and analysis of these compounds.