Selenium speciation in foods: Preliminary results on potatoes

The present paper deals with the speciation of selenium in potatoes (enriched or not in selenium). The study was carried out by using differential pulse cathodic stripping voltammetry (DPCSV) for quantifying selenium. Results obtained provide evidence that the selenium content in the protein fraction is rather independent from the selenium added to the plants during their growth. On the contrary, the amount of Se in the non-protein fraction (water and starch) in Se-enriched sample is significantly higher than in non-enriched one, suggesting that it is the main selenium-storing site. In this fraction the Se(VI)/Se(IV) ratio seems independent from selenium application but it may be related to the redox conditions. The accumulation of selenium in the non-protein fraction is tentatively ascribed to the “Se–starch interaction” that should be able to modulate both the Se absorption into proteins and, possibly, its toxic effect for the plant itself.     

Voltammetric behaviour and determination of moxifloxacin in pharmaceutical products and human plasma

The oxidative behaviour of moxifloxacin was studied at a glassy carbon electrode in different buffer systems using cyclic, differential pulse, and Osteryoung square-wave voltammetry. The oxidation process was shown to be irreversible over the entire pH range studied (2.0–10.0) and was diffusion-controlled. The methods were performed in Britton–Robinson buffer and the corresponding calibration graphs were constructed and statistical data were evaluated. When the proposed methods were applied at pH 6.0 linearity was achieved from 4.4×10^–7 to 1.0×10^–5 mol L^–1. Applicability to tablets and human plasma analysis was illustrated. Furthermore, a high-performance liquid chromatographic method with diode-array detection was developed. A calibration graph was established from 4.0×10^–6 to 5.0×10^–5 mol L^–1 moxifloxacin. The described methods were successfully employed with high precision and accuracy for estimation of the total drug content of human plasma and for pharmaceutical dosage forms of moxifloxacin.     

DSC法研究液晶物质2-(4-烷氧苯基)6-取代苯并噻唑的相变热性质

The phase transitions of a new group of mesogens, 2-(4-alkoxyphenyl)-6-substituted benzothiazoles were thermodynamically studied by DSC, and their transition temperatures and enthalpy changes were measured, from which the transition entropy changes were calculated. The results obtained were discussed. In addition, the phe-nomenon of super-cooling of the compounds were quantitatively observed.     

超支化聚硅氧烷的紫外光固化行为及固化动力学研究

采用等温差示光量热技术(DPC)研究了超支化聚硅氧烷的紫外光固化行为及固化动力学. 探索了引发剂浓度、 光强度、 聚合温度和环境气氛对固化行为的影响规律. 研究结果表明, 增加光引发剂浓度和光强度及提高环境温度均可提高其固化速率和双键最终转化率. 在空气中固化时存在氧阻聚现象, 增大光强度可以显著缩短诱导期. 运用带扩散因子的自催化固化动力学模型研究了其光固化动力学, 计算出特定条件下的光固化动力学参数, 反应总级数约为6—7, 表观活化能为9.95 kJ/mol. 通过超支化聚合物与两种结构类似的低官能度单体光固化行为的对比, 研究了超支化聚合物固化行为与其分子结构的关系, 发现由于超支化大分子的独特结构, 在固化初始阶段便产生凝胶, 因此双键的最终转化率偏低.     

Polymer crystallization dynamics,as reflected by differential scanning calorimetry. Part 2: Numerical simulations

With the aid of a model for the kinetics of polymer crystallization, as put forward in previous publications, the shape of DSC-curves and their position on the temperature scale were simulated for various conditions of heat transfer in the apparatus. It turns out that the outcome is very dependent on the assumptions made with respect to these heat transfer conditions. For the ideal condition — no temperature differences between sample, pan and furnace — an invariable shape is predicted for the DSC-curves. They only shift to lower temperatures with increasing cooling rates. For more realistic conditions, the curves not only shift but become broader and their maxima decrease. They show a more familiar appearance. These calculations are very involved, however, A simple balance equation is shown to yield equivalent results, if a dimensionless characteristic number like the Nusselt number remains considerably smaller than one. This number contains an effective heat transfer coefficient between sample and furnace which, surprisingly, should not be too high. Apparently, the heat capacity of the pan does not play an important role under these conditions. This is investigated in Appendix II. Appendix I describes the procedure of the numerical simulations.     

Voltammetry in Undiluted Acetic Acid. In Situ Determination of Water

Water present in undiluted acetic acid can be monitored in situ with Pt and Au microelectrodes using differential pulse and square‐wave voltammetries. Both reduction and oxidation peaks can be obtained. The best quantitative analytical results were obtained for the anodic peak, the Pt microelectrode, and differential pulse voltammetry. The anodic water peak is located at +1.55 V vs. the quasi reference Pt electrode. The voltammetric peak obtained at Pt electrode is apparently not a diffusional one, however, the calibration plot obtained by employing this peak is linear over a wide concentration range, up to 4 mol dm^?3. The detection limit has been estimated as 2.3 mM or 0.0043 v/v%. The developed method may be particularly useful, since the Karl Fischer method can not be used to determine water in glacial acetic acid due to the estrification reaction of acetic acid with methanol. A voltammetric wave of undiluted acetic acid could not be obtained in the positive and negative ranges of potential.     

On the minimal time function for distributed control systems in Banach spaces

In this paper, it is shown that the minimal time function is locally Lipschitz continuous for the control systemx=Ax+u in a Banach spadeE, under either of two conditions:A is linear and generates aC ₀-semigroup of bounded linear operators; orA is nonlinear, possibly multivalued, and dissipative. The main tool used for the nonlinear case is a result of Barbu concerning the null controllability of the system.     

Simultaneous Determination of Aluminum and Iron in High Salt Content Matrices by Adsorptive Stripping Voltammetry. Application to Dialysis Fluids

A new analytical procedure for the simultaneous determination of aluminum(III) and iron(II) in two kinds of dialysis fluids (peritoneal and hemodialysis fluids) by differential pulse adsorptive stripping voltammetry (DPAdSV) is described. The voltammetric measurements were performed using, as working electrode, a stationary mercury electrode, and a platinum electrode and a Ag|AgCl|KCl_(sat.) electrode as auxiliary and reference electrodes, respectively, employing acetate buffer solutions at different pH as supporting electrolyte. As complexing agents, Solochrome Violet RS, Palatine Chrome Black 6BN, Chromazurol S and Eriochrome Black T were employed. For both elements, the accuracy, expressed as relative recovery R%, was very satisfactory being in the range 94–105%, the precision as repeatability, expressed as relative standard deviation s_r%, was lower than 6%, while the limits of detection were of the order of a few units of μg/L. The analytical voltammetric procedure has been validated by comparison with spectroscopic (graphite furnace atomic absorption spectroscopy, GFAAS) measurements.     

Analysis of the nonisothermal crystallization kinetics in three linear aromatic polyester systems

Melt or cold crystallization kinetics has a strong bearing on morphology and the extent of crystallization, which significantly affects the physical properties of polymeric materials. Nonisothermal crystallization kinetics are often analyzed by the classical Johnson–Mehl–Avrami–Kolmogorov (JMAK) model or one of its variants, even though they are based on an isothermal assumption. As a result, during the nonisothermal (e.g. constant heating or cooling rate) crystallization of polymeric material, different sets of model parameters are required to describe crystallization at different rates, thereby increasing the total number of model parameters. In addition, due to the uncorrelated nature of these model parameters with the cooling or heating rate, accurate modeling at any intermediate condition is not possible. In the present work, these two limitations of the conventional approach have been eliminated by exhibiting the existence of a functional relationship between cooling or heating rate and effective activation energy during nonisothermal melt or cold crystallization in three linear aromatic polyesters. Furthermore, it has been shown that when the JMAK model is used in conjunction with this functional relationship, it is possible to precisely predict the experimental nonisothermal melt or cold crystallization kinetics at any linear cooling or heating rate with a single set of model parameters.     

Differential pulse voltammetric determination of trace Te(IV) at a poly(3,3′-diaminobenzidine) film modified gold electrode in flow systems

Electropolymerization of 3,3′-diaminobenzidine on a gold surface gave an adherent, stable film of poly(3,3′-diaminobenzidine) (PDAB). This polymer film retained the complexational functionalities of its monomer, demonstrating preconcentration abilities for several ions, including Se(IV) and Te(IV). In particular, in this work, continuous flow and flow injection methods were developed for the sensitive and selective determination of Te(IV). The optimized method for the continuous flow mode had a detection limit of 5.6×10⁻⁹ mol l⁻¹ for 10 min preconcentration. Typical relative standard deviations for six consecutive determinations were 1.82 and 2.56% for Te(IV) concentrations of 1.0×10⁻⁶ and 5.0×10⁻⁸ mol l⁻¹, respectively (10 min preconcentration). The method was applied to the determination of Te(IV) in real samples.