苏州阳澄湖地区淤泥质粘土工程地质特性探讨

苏州阳澄湖周围的沼积湖积平原存在一种性质较为特殊的淤泥质粘土,其亲水性粘土矿物含量和液塑限指标均较高,但在天然状态下虽具一定的胀缩性却未达到膨胀土的标准,可是经过扰动压实后,随着干密度的增大和含水量的减少却表现出较强的胀缩性,即转变为“人工膨胀土”[1]。本文通过苏州阳澄湖东北方向某一级公路附近3个取土场土样的试验分析,探讨了此地区这种淤泥质粘土的特殊性,为以后的工程施工提供了科学依据。     

Analysis of blank thickening in deep drawing processes using the theory of a Cosserat generalized membrane

This paper analyzes a transient, nonlinear deep drawing process where a circular blank of a rigid-plastic material is forced by a rigid circular punch to deform into a cylindrical cup. Attention is focused on the plastic flow beneath the blank-holder. Using the Cosserat theory of a generalized membrane it is possible to obtain analytical solutions which examine the following two major effects: (a) the importance of added “rim pressure” acting on the outer edge of the blank; and (b) the importance of a controlled moveable blank-holder to allow blank thickening during the drawing process. Guided by these analytical results, a new deep drawing machine was built to exploit these effects and increase the limit drawing ratio (LDR) of the drawing process. Specifically, the LDR (in one stroke) reached the value of 3.16 compared with the value of about 2.0 in the conventional process. Moreover, the analytical prediction of the punch force versus the punch stroke is in good agreement with the experimental data and with simulations using the computer code DYTRAN.     

Antibacterial and antifungal LDPE films for active packaging

Active antimicrobial packaging is a promising form of active packaging that can kill or inhibit microorganism growth in order to maintain product quality and safety. One of the most common approaches is based on the release of volatile antimicrobial agents from the packaging material such as essential oils. Due to their highly volatile nature, the challenge is to preserve the essential oils during the high‐temperature melt processing of the polymer, while maintaining high antimicrobial activity for a desired shelf life. This study suggests a new approach in order to achieve this goal. Antimicrobial active films are developed based on low‐density polyethylene (LDPE), organo‐modified montmorillonite clays (MMT) and carvacrol (used as an essential oil model). In order to minimize carvacrol loss throughout the polymer compounding, a pre‐compounding step is developed in which clay/carvacrol hybrids are produced. The hybrids exhibit a significant increase in the d‐spacing of clay and enhanced thermal stability. The resulting LDPE/(clay/carvacrol) films exhibit superior and prolonged antibacterial activity against Escherichia coli and Listeria innocua, while polymer compounded with pure carvacrol loses the antibacterial properties within days. The films also present an excellent antifungal activity against Alternaria alternata, used as a model plant pathogenic fungus. Furthermore, infrared spectroscopy analysis of the LDPE/(clay/carvacrol) system displayed significantly higher carvacrol content in the film as well as a slower out‐diffusion of the carvacrol molecules in comparison to LDPE/carvacrol films. Thus, these new films have a high potential for antimicrobial food packaging applications due to their long‐lasting and broad‐spectrum antimicrobial efficacy. Copyright © 2014 John Wiley & Sons, Ltd.     

Isopropanol dehydration via extractive distillation using low transition temperature mixtures as entrainers

Low transition temperature mixtures (LTTMs), also known as deep eutectic solvents, show properties that make them suitable as entrainers for extractive distillation. Two different low transition temperature mixtures were considered as potential entrainers for the extractive distillation of the azeotropic mixture (isopropanol + water). (Lactic acid + choline chloride) (2:1) and (glycolic acid + choline chloride) (3:1) were selected for this work. (Vapor + liquid) equilibrium measurements of the pseudo-binary systems (isopropanol + LTTM) and (water + LTTM) were measured at different concentrations of LTTM in a pressure range of 10 to 100 kPa. (Vapor + liquid) equilibrium data of the pseudo-ternary system (isopropanol + water + LTTM) were also measured at constant pressure (100 kPa) and constant LTTM molar fraction of 0.05 and 0.1. It was found that these LTTMs cannot break the azeotrope at those concentrations. However, the azeotrope was displaced to a much higher isopropanol concentration. The NRTL model was successfully applied to fit the experimental data.     

新型低共熔溶剂的制备、表征及物性研究

以氯化1-丁基-3-甲基咪唑鎓([Bmim]Cl)和二元羧酸为原料,由不同摩尔比混合制备了一类新型低共熔溶剂,采用红外光谱对[Bmim]Cl和二元羧酸之间的作用进行了分析。分别测定了其粘度、电导率、密度、折射率等物理性质,并研究了温度、二元羧酸结构和摩尔比对这些物理性质的影响。结果表明,新型低共熔溶剂的粘度随温度的升高而降低,电导率随温度的升高而增加。温度对两者的影响可以采用VTF方程进行精确地拟合。新型低共熔溶剂的密度随温度的升高而呈线性下降。对新型低共熔溶剂的过量摩尔体积进行计算的结果表明,过量摩尔体积均为正值,二元羧酸对过量摩尔体积的贡献远大于[BMIM]Cl,而结构特性的贡献多于物理作用。折射率和密度随二元羧酸碳数的变化趋势基本相似。     

深共熔溶剂及其生物催化应用

在绿色化学研究领域,溶剂占据着重要的位置。作为一个绿色溶剂必须满足廉价易得、可生物降解、无毒、可循环使用、无挥发性等标准的要求。但是至今能满足这些要求的溶剂仍然非常有限。近年来,深共熔溶剂（Deep Eutectic Solvents,DESs）被认为可以作为绿色溶剂替代传统的有机溶剂而受到广泛关注。DESs是由两个或多个成分在特定比例下形成的凝固点大大降低室温液态混合物。与离子液体相比,DESs具有廉价、低毒、可生物降解等特点,在许多领域成为研究热点。本文综述了DESs的生物降解性、毒性/细胞毒性及其作为生物催化反应介质的研究现状。基于对研究现状的认识,对DESs未来研究、应用需要解决的问题进行了讨论。作者期望对DESs生物催化应用研究现状的综述更进一步促进DESs研究、应用的发展。     

Improving the water resistance of epoxy–anhydride matrices by the incorporation of bentonite

Epoxy–anhydride‐based polymers are commonly used as a matrix in pipeline systems exposed to water during their in‐service life. Water absorption at moderate temperatures and/or at long exposure times could lead to irreversible hydrolysis reaction decreasing considerably the polymer overall performance. A strategy to enhance the barrier properties of epoxy resins is to add nanofillers to traditional matrices. In this work, we added bentonite and chemically modified bentonite to this purpose. Water absorption of the resulting materials at three different temperatures (22°C, 80°C, and 93°C) was studied, and simultaneously, the evolution during the immersion tests of glass transition temperature and flexural modulus was recorded. Long‐term gravimetric results showed that composites with chemically modified bentonite produce a delay on the hydrolysis of epoxy–anhydride matrix, which is a relevant result, because of the tough application and uses of the system, from the technological point of view. Copyright © 2016 John Wiley & Sons, Ltd.     

Delamination of sodium montmorillonite in PA6 in the presence of melamine polyphosphate

This study describes the influence of melamine polyphosphate (MPP) flame retardant addition on layered structure of virgin sodium montmorillonite (MMT) in PA6/MMT system obtained in extrusion process. It was found that the extrusion of the PA6/MMT binary system in co‐rotating twin screw extruder gives intercalated clay nanocomposites, while during extrusion of ternary PA6/MMT/MPP composite, full exfoliation of clay was obtained in the system. Structure of the composites was proved utilizing wide angle X‐ray scattering and transmission electron microscopy techniques. Exfoliation of MMT in ternary PA6/MMT/MPP system was also confirmed by rheological studies (viscosity and creep measurements) which were carried out using rotational rheometer. Young's modulus of PA6/MMT/MPP was found to be ~25% greater comparing to PA6/MPP of the same filling level. Cone calorimetry experiments proved decrease of heat release rate peak of PA6/MMT/MPP by ~55% comparing to PA6/MPP with the same total filling level. Copyright © 2017 John Wiley & Sons, Ltd.     

Effect of Acid Treatment of Montmorillonite on “Support‐Activator” Performance to Support Metallocene for Propylene Polymerization Catalyst

This work is focused on montmorillonite (MMT)‐based “support‐activators” (S‐As) for the metallocene‐catalyzed propylene polymerization. This catalyst was previously industrialized; however, for further technological advances, the activation mechanism is investigated. The chemical and morphological requirements of the S‐A are surveyed using both commercially available raw clay minerals (non‐acid‐treated) and acid‐treated clay minerals. The S‐A possessing strong‐acid sites (pK a < ?8.2) gives a highly active catalyst. Acid treatment of MMT induces morphological changes as well as the formation of strong acid sites. Based on pore size distribution analysis and atomic force microscopy observations, it is concluded that the strong acid sites are located in the small pores around the edge of the clay mineral (not in the interlayer), where the structure is disordered by the acid treatment.

     

某软土深基坑工程时间效应有限元分析

软土地区的深基坑因土体的固结作用和流变性而具有了时间效应。本文以Biot固结有限元法为基础,用三元件模型中的第一个线性弹簧模拟固结作用,弹性模量考虑了开挖应力路径和应力历史的影响;另外一部分(KELVIN模型)来模拟土体的流变性,以实际变形的反演来得到两个参数的大致取值,再对基坑的变形情况以及进一步开挖进行分析。假定为正常固结饱和粘土,平面应变问题。通过对某饱和软粘土地基深基坑开挖工程实例的分析,得到的挡墙水平位移曲线与实测曲线很吻合,表明程序较好地反映出基坑的时间效应。