基于非同步替代光谱定标的地表下垫面影响分析

对760nm附近的氧气吸收带,选用植被、枯萎植被、人工地物、沙地和雪地五种典型地表类型,基于模拟数据进行非同步替代光谱定标方法的误差分析,比较不同地表类型得到的光谱定标准确度,为高光谱成像仪的非同步替代光谱定标提供定标图像选择策略.结果表明:运用两种光谱匹配方法——光谱角度匹配和欧氏距离法得到的定标误差基本一致;730~800nm的地表反射率曲线标准差在0.05nm以内时,定标误差集中在±0.5nm范围内;人工地物类型中个别地物如橄榄绿光泽涂料和植被大面积覆盖的图像数据不适合用于非同步替代光谱定标.     

钛表面生物活性榍石/氧化钛复合涂层的结构和磷灰石形成机理(英文)

采用微弧氧化和热处理复合技术,在钛表面制备了具有双层结构的榍石/氧化钛复合涂层。榍石/氧化钛复合涂层的外层是由微弧氧化涂层经热处理后晶化生成;而内层是由钛基底的氧化生成,并且氧化钛表现出不同的Ti,O原子比。由于钛基底的氧化,孔径在50~500 nm的微孔呈层状结构分布在涂层内层。与微弧氧化涂层相比,该复合涂层具有很好的磷灰石诱导能力,这是由于榍石沿着特定晶面和晶向与羟基磷灰石表现出良好的晶体学匹配关系,从而为磷灰石的成核和取向沉积过程提供良好的位点。     

Carbon-coated Li3VO4 with optimized structure as high capacity anode material for lithium-ion capacitors

Due to the high capacity, moderate voltage platform, and stable structure, Li₃VO₄ (LVO) has attracted close attention as feasible anode material for lithium-ion capacitor. However, the intrinsic low electronic conductivity and sluggish kinetics of the Li⁺ insertion process severely impede its practical application in lithium-ion capacitors (LICs). Herein, a carbon-coated Li₃VO₄ (LVO/C) hierarchical structure was prepared by a facial one-step solid-state method. The synthesized LVO/C composite delivers an impressive capacity of 435 mAh/g at 0.07 A/g, remarkable rate capability, and nearly 100% capacity retention after 500 cycles at 0.5 A/g. The superior electrochemical properties of LVO/C composite materials are attributed to the improved conductivity of electron and stable carbon/LVO composite structures. Besides, the LIC device based on activated carbon (AC) cathode and optimal LVO/C as anode reveals a maximum energy density of 110 Wh/kg and long-term cycle life. These results provide a potential way for assembling the advanced hybrid lithium-ion capacitors.     

Matching subsequences in trees

Given two rooted, labeled trees P and T the tree path subsequence problem is to determine which paths in P are subsequences of which paths in T. Here a path begins at the root and ends at a leaf. In this paper we propose this problem as a useful query primitive for XML data, and provide new algorithms improving the previously best known time and space bounds.     

Addendum to: “Hamilton-laceable bi-powers of locally finite bipartite graphs” [Discrete Math. 345 (2022) 112777]

In this addendum we give a short and easy negative answer to the two questions raised in the original article.     

重力匹配导航的影响模式分析

从重力场匹配导航的改进TERCOM算法入手,针对采样长度、采样间隔以及重力测量误差对匹配结果的影响进行了系统分析,并在此基础上利用海洋年度重力测量数据设计了准实时仿真试验,结果表明:(1)采样长度对匹配结果有重要的影响,采样长度与重力基准图的分辨率比值在10~20之间时,能够获得较好的匹配效果;(2)适当增加采样间隔可以在一定程度上提高匹配的整体精度,但增加了匹配失效的风险,实际应用中采样间隔以2~4 min为宜;(3)重力测量白噪声误差对匹配结果影响相对较大,过大的误差将不能得到有效匹配,水下重力测量误差最好能控制在2 mGal以内。     

Improvement on peak-to-trough ratio of sampled fiber Bragg gratings with multiple phase shifts

Via a cascaded structure, the peak-to-trough ratio is considerably improved for sampled fiber Bragg gratings （SFBGs） based on multiple-phase-shift （MPS） technique. This cascaded filter is composed of two identical SFBGs which are inserted with the increasing or decreasing arrangement of phase shifts. With this inverse arrangement of MPS in grating design, the phase fluctuation of individual SFBG can be compensated, and as a result an excellent phase matching condition is realized. In this way, the peak-to- trough ratio in reflection spectra is improved from 6 to 12 dB when multiplication factor m = 4, and from 5dBto 10dBwhenm=8.     

Analysis of visual perception of light emitting diode brightness in dense fog with various droplet sizes

Road signs must provide a conspicuous signal to a wide variety of drivers over a broad range of environmental and geometric conditions. Recently, there are an increasing number of applications in which light emitting diodes (LEDs) are used as the light source, including critical transportation signaling. In the presence of fog, the resulting visual signal is disturbed due to light scattering by airborne water droplets. By measuring LED brightness with human spectral sensitivity in various densities and various droplet sizes (10, 30, 50, and 100 μm), it is understood that the particle size distribution (fog droplet size) and density of fog does affect visibility in fog. The colored LEDs that contain a yellow component had high brightness evaluation, blue component had low brightness evaluation in all densities and different droplet sizes. The result in this paper can contribute to air and land traffic safety and the prevention of accidents.     

Confocal Microscopy Studies of Trypsin Immobilization on Porous Glycidyl Methacrylate Beads

The immobilization of trypsin on porous glycidyl methacrylate (GMA–GDMA) beads has been investigated. In particular, the distribution within the beads of trypsin and of dextran used for hydrophilizing the bead surface prior to protein immobilization was investigated with confocal microscopy. For the system investigated, the fluorescence intensity profiles obtained when using borate buffer as an ambient solution displayed a distinct minimum at the center of the beads, irrespective of the observation depth. However, by reduction of the refractive index difference between the solution and the beads through the addition of glucose to the aqueous solution, artifacts relating to optical length differences could be reduced. For both low molecular weight fluorescein isothiocyanate (FITC), FITC-labeled trypsin, and FITC-labeled dextran, an essentially homogeneous distribution throughout the beads was observed. This simple “contrast matching” method seems therefore to be an interesting tool when investigating the distribution of immobilized protein in porous chromatography media.     

A novel quasi-phase-matching frequency doubling technique

A new quasi-phase-matching technique for efficient second-harmonic generation is reported. It is based on the spatial periodic modulation of the light intensity along the propagation direction, rather than the conventional spatial periodic modulation of the nonlinear optical coefficients. It can be realized by using a novel dual-channel waveguide frequency doubler structure for the desired light intensity distribution. This dual-channel waveguide device has major advantages including very small beam size, high light intensity within long nonlinear-waveguide interaction length, highly efficient second-harmonic generation, ease in fabrication of the nonlinear channel waveguides without any spatially periodic poling, and low waveguide propagation losses. The new quasi-phase-matching technique can also be applied to third-harmonic generation and other nonlinear optics processes.