Electron paramagnetic resonance study of amphiphiles partitioning behavior in desiccation-tolerant moss during dehydration

Desiccation tolerance is a crucial characteristic for desert moss surviving in arid regions. Desiccation procedure always induces amphiphiles transferring from the polar cytoplasm into lipid bodies. The behavior of amphiphiles transferring can contribute to the enhancement of desiccation tolerance and the reduction of plasma membrane integrity simultaneously. The effects of amphiphiles partitioning into the lipid phase during water loss has been studied for pollen and seeds using electron paramagnetic resonance (EPR) spectroscopy. However, desiccation-tolerant high plants occur among mosses, several angiosperms and higher plants seeds or pollens. They have different strategies for survival in dehydration and rehydration. A desiccation-tolerant moss Tortula desertorum was used to investigate the behaviors of amphiphilic molecules during drying by spin label technology. There are small amount of amphiphilic probes partitioning into membrane during moss leaves dehydration, comparing with that in higher plants. Cytoplasm viscosity changed from 1.14 into glass state only dehydration less than 60 min. Moss leaves lost plasma membrane integrity slightly, from 0.115 to 0.237, occurred simultaneously with amphiphiles partition. The results showed the more advantages of mosses than higher plants in adapting fast dehydration. We propose that EPR spin label is feasible for studying the amphiphiles partitioning mechanisms in membrane protection and damage for desiccation-tolerant mosses.     

纳米镍-铁合金/膨胀石墨复合材料的制备、表征及其电磁屏蔽性能

The composites with nano-particles of Ni-Fe alloys dispersed on the nano-layers of expanded graphite (EG) were prepared by the impregnation of EG with ethanol solutions of nickel and iron acetates， followed by drying and reduction in H₂. The square nano-particles of Ni-Fe alloys with particle sizes of mainly 20～40 nm were found to be well spread on the layers of EG. The alloy nano-particles exhibited high shielding effectiveness (SE) for electromagnetic radiations at low frequencies due to their high magnetic conductivity. Since EG is electronically conductive and displayed high SE at high frequencies， the composites exhibited good SE at wide range of frequencies. The electric and magnetic conductivities of the composites could be monitored through regulating the loadings of alloy nano-particles on EG， and it was found that the composites with 20%～40% of the alloys exhibited good SE. Specifically， the composite 27%Ni-3%Fe-EG showed the excellent SE from 66 to 110 dB at the frequencies from 300 kHz to 1.5 GHz.     

脉冲泄流时土壤条件对冲击接地阻抗的影响

 为了探寻电流脉冲泄流时，设备的接地是否有效可靠，用FDTD法分析了脉冲泄流时均一土壤、分层土壤及局部改善土壤的电导率对冲击接地阻抗（TGR）的影响。结果表明：大地电导率对冲击接地阻抗的影响很大；对均一土壤，TGR随大地电导率的增大而减小，大地电导率越大，TGR对接地体的埋深越不敏感。对分层土壤，接地体要埋在大地电导率大的土壤层中，且不要靠近交界面；局部改善大地导电性能对降低TGR效果明显，TGR对改善区域的体积非常敏感，而当电导率大于一定值时，大地电导率的再增加，对TGR的影响不明显。     

New method to solve electromagnetic parabolic equation

This paper puts forward a new method to solve the electromagnetic parabolic equation （EMPE） by taking the vertically-layered inhomogeneous characteristics of the atmospheric refractive index into account. First, the Fourier transform and the convo- lution theorem are employed, and the second-order partial differential equation, i.e., the EMPE, in the height space is transformed into first-order constant coefficient differential equations in the frequency space. Then, by use of the lower triangular characteristics of the coefficient matrix, the numerical solutions are designed. Through constructing ana- lytical solutions to the EMPE, the feasibility of the new method is validated. Finally, the numerical solutions to the new method are compared with those of the commonly used split-step Fourier algorithm.     

含磁单极电动力学的电磁对偶对称性自发破缺问题

首先提出了一种认为磁单极的存在将导致电动力学电磁对偶对称性自发破缺的新观点,指出了和这种对称性自发破缺相关联的零质量标量粒子即Goldstone玻子存在的可能性.然后通过对含磁单极电动力学作用量描述困难的分析,提醒读者磁单极的存在给电动力学带来的复杂性和不对称.最后为非高能物理背景的读者提供了两类磁单极即经典场扩展位形类磁单极和点粒子磁单极的概念.     

2.0T斜螺线管型超导二极磁体设计

基于一种新型的斜螺线管型线圈结构,我们设计了一台2.0T超导二极磁体样机。该磁体由4层斜螺线管线圈组成,工作电流为2960A。线圈孔径为40mm,其中好场区达到了孔径的2/3。由于线圈形状的特殊性,其端部结构无需优化,各高阶谐波量沿轴向积分为零。文中介绍了斜螺线管型线圈的特点和原理,借助两种电磁场分析软件,完成了超导二极磁体的磁场设计,最后简要介绍磁体的加工情况。     

NiCF/ABS复合材料的制备及电磁屏蔽效能研究

探讨了碳纤维(CF)表面镍金属的化学镀工艺,制备了镀镍碳纤维(NiCF),采用密炼工艺制备了ABS基体复合材料,研究了CF和NiCF含量对复合材料的导电性能及电磁屏蔽效能的影响。结果表明:采用化学镀的方法在碳纤维表面镀覆了金属镍,所形成的镀层均匀致密;镀覆时间为5min时,镀镍后的碳纤维电阻率降低两个数量级;复合材料电阻率随CF、NiCF含量的增加而逐渐减小;复合材料电磁屏蔽效能随CF、NiCF含量的增加而逐渐增加,当NiCF含量为25%(wt)(约13.3vol%)时,电磁屏蔽效能最高可达51dB。     

镍锌铁氧体/膨胀石墨/聚苯胺复合物的电磁损耗性能

用化学共沉淀法和原位乳液聚合法分别制备了镍锌铁氧体(Ni_xZn_1-xFe₂O₄)、Ni_0.7Zn_0.3Fe₂O₄/膨胀石墨(NZF/EG)二元复合物及其聚苯胺(PANI)包覆的三元复合物(NZF/EG/PANI)。用现代测试技术表征了样品的组成、结构、形貌和电磁性能。结果表明,NZF粒子较好地嵌入到EG的层间,PANI对NZF/EG的包覆效果良好;三元复合物的磁性能随磁性组分含量的减小而减弱,而电导率与EG和PANI的导电性及其相对含量相关联;复合物的电磁损耗性能优良,其中三元复合物优于二元复合物。含PANI 70wt%的NZF/EG/PANI三元复合物,制样厚度分别为1.5、2.0和2.5 mm时,其反射损耗峰值(有效带宽)分别为-19.99 dB(5.82 GHz),-20.33 dB (4.08 GHz)和-25.28 dB(3.67 GHz),具有优良的电磁波吸收效果。     

纳米镍钴铁氧体空心微球的制备与性能

以乙二醇为溶剂,氯化铁、氯化钴、氯化镍和醋酸铵为反应试剂,采用溶剂热法制备纳米Ni_xCo_1-xFe₂O₄(x=0、0.3、0.5、0.7、1)铁氧体空心微球,研究镍含量对铁氧体空心球的磁性与吸波性能的影响。借助X-射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、振动样品磁强计(VSM)和网络分析仪对试样的物相组成、微观形貌和电磁特性进行表征。结果表明制备的镍钴铁氧体为尖晶石结构,且形貌为空心球,粒径在200 nm左右。当x=0时,镍钴铁氧体空心球饱和磁化强度最大为81.7 emu·g^-1,反射损耗在1 658.8 MHz有最小值为-16.9 dB。     

双功能聚二甲基硅氧烷/铜纳米线复合薄膜的制备与性能

通过环境友好的葡萄糖模板法和改进的湿化学还原法制备了聚二甲基硅氧烷/铜纳米线(PDMS/CuNWs)复合薄膜, 其采用的“类夹心结构”有效解决了铜在空气中易氧化进而导致电导率大幅度下降的问题, 同时获得了具有优异电磁屏蔽和光热转化性能的双功能轻质柔性复合薄膜. CuNWs面密度为1.6 g/cm²的复合薄膜在重复弯折1000次后性能保持率最高可达99.07％; CuNWs面密度为2.4 g/cm²的复合薄膜在X波段下总电磁屏蔽效能达到30.1 dB, 屏蔽效率达到99.9％; 同时, 在2 W/cm²的近红外光照射下, 复合薄膜在仅加热15 s后其表面温度高达211.2 ℃, 具有十分快速的光热响应和转化效率.