Efficient Visible Electroluminescence from Porous Silicon Diodes Passivated by Carbon Films

By using n-butylamine as a carbon resource,carbon film is deposited on the p-n porous silicon (PS) surface with a radio-frequency glow discharge plasma system.Raman spectra and infrared reflection (IR) spectra of the carbon films indicate that there are amine-group and hydrogen atoms therein.The IR spectra of the passivated PS samples exhibit that the PS surfaces are mainly covered with Si-C,Si-N and Si-O bonds.Electroluminescence (EL) spectra show that the EL intensity of the passivated PS diodes increases greatly and the blueshift of the EL peak occurs compared with the diodes without treatment.Both of these are stable while the passivated diodes are exposed to the air indoors.The I-V characteristics reveal that the passivated diodes have a smaller series resistance and a lower onset voltage.The influence of the carbon film passivation on EL properties of PS has also been discussed.The results have proven that carbon film passivation is a good way to enhance the PS luminescent intensity and stability.     

POROSITY CALCULATION OFMIXTURES OF FIBROUS PARTICLES

The initial forming of fiber blend to high green density, i.e. the packing of fibrous particles, is important to the reinforcement of composite materials. It is very useful to develop a general predictive method for the optimum selection of particle mixtures for the property control of ceramic or composite products. This paper presents such a mathematical model developed on the basis of the similarity analysis between the spherical and non-spherical particle packings and assesses its applicability to the packing of fibrous particles with discrete and/or continuous length distributions. The results indicate that the model can predict this packing system well and hence provide an effective way to solve various packing problems in the composite materials processing.     

多孔硅制备过程中B,P杂质原子的作用

采用DV-Xα方法对多孔硅形成过程中位于表层的B和P杂质原子的作用进行研究,结果表明位于顶层硅原子层中的B和P杂质原子均可削弱其邻近的Si-Si键强度,因而可能导致出现腐蚀的突破点,再通过分析杂质对表面区势场的改变,可以认为位于顶层硅原子层中的B杂质原子产生腐蚀的突破点的可能性更大。 关键词：     

规则结构多孔填料塔两相流动特性实验研究

本文以空气和水为工质,对规则结构多孔填料塔的气-液逆向流动特性进行了可视化实验,研究了填料塔内气一液两相流动规律.实验结果表明:当液体流量一定时,随着气体流量的增加,压力损失增大;当气体流量一定时,随着液体流量的增加,气相压力损失增加.根据实验结果提出了采用水力雷诺数、韦伯数和无量纲流动参数的填料塔内气-液两相流动阻力系数实验关联式.     

Lattice Boltzmann方法模拟多孔介质Klinkenberg效应

格子Boltzmann数值模拟方法是研究复杂的多孔介质结构特别是Klinkenberg效应的有效方法之一，对处理复杂边值问题尤其有效，用格子Boltzmann方法研究了气流穿越多孔介质问题，并将数值计算结果与实验结果进行了比较，结果表明格子Boltzmann方法是数值模拟气流穿越多孔介质问题的有效方法之一。     

焚烧炉中多孔介质状垃圾团块传热分析

以焚烧炉中垃圾团块的传热问题为背景,研究含高水分的多孔介质在高温环境下的传热规律。气、固相处于非热平衡态,分别列出其能量方程,且能量方程中考虑辐射项。从描述多孔介质传热的质点方程出发,采用局部容积平均法导出平均化方程,根据经验修正方程中的系数,并列出适当的初始条件和边界条件,用数值计算方法求出垃圾团块中气、固两相的温度场。     

Experimental Study of Capillary Effect in Porous Silicon Using Micro-Raman Spectroscopy and X-Ray Diffraction

We investigate the capillary effect and the residual stress evolution in the wetting, drying and rewetting stages of porous silicon using x-ray diffraction and micro-Raman spectroscopy. A reversible capillary effect and an irreversible oxidation effect are the driving forces for the residual stress evolution. The lattice expansion of the porous-silicon layer is observed to decrease slightly by x-ray diffraction and the tensile residual stress increases rapidly by micro-Raman spectroscopy, with the change of about 82 MPa for the oxidation effect and the change of 2.78 GPa (enough for cracking) for the capillary effect. Therefore, the capillary effect plays a major role in the residual stress evolution in the stages. A simple microscopic liquid-bridge model is introduced to explain the capillary effect and its reversibility. The capillary emergence has a close relation with a great deal of the micro-pore structure of porous silicon.     

渗滤的系统及其分析及其数学模型

对于两相体系和多相体系有多孔介质中的渗滤分离过程进行数学模拟，并求解出这一过程．     

真空热解析分析系统的研制

系统主要针对金属材料中氢同位素和氦的热解析研究而研制，系统原理图如图l所示。系统支路中设计消气剂床，用以避免金属氚化物解析时氚的排放问题；温度、压力和解析组分等由采集系统采集与分析。