PREPARATION OF CUO/γ-Al2O3 CATALYSTS FOR CATALYTIC COMBUSTION VOCS VIA PLASMA

CuO/γ-Al2O3 catalysts were prepared by plasma treatment and conventional impregnation methods. The catalytic combustion of two kinds of volatile organic compounds (VOCs), toluene and benzene, were carried out over these CuO/γ-Al2O3 catalysts. The surface properties of these catalysts were characterized by X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The experimental results showed that in catalytic combustion the activity of the CuO/γ-Al2O3 catalyst prepared via plasma was much higher than that of the CuO/γ-Al2O3 catalyst prepared by conventional impregnation method. XRD results showed that an enhanced dispersion had been achieved with the plasma treatment. SEM results indicated that the size became much smaller and the surface became more uniform with the plasma treatment.     

IDENTIFICATION OF LANOSTANES AND THEIR POSSIBLY GEOCHEMICAL SIGNIFICANCE IN BIYANG DEPRESSION

In the study, a series of C_(30)-C_(32) lanostane homologs have been identified from Eogene source rocks and crude oils of Biyang depression in Henan Province, China. Based upon the geochemical investigations and simulating experiments, the idea that the generation of lanostane may mainly be related to the specific original organic inputs and low maturity has been proposed.     

Use of α‐diketones as visible photoinitiators for the photocrosslinking of waterborne latex paints

The efficiency of several α‐diketones as visible light photoinitiators for the crosslinking of waterborne latex dispersions in the presence of acrylic monomers was evaluated. Among the eight α‐diketones studied, camphorquinone allows the fastest curing speed, and the curing of the acrylic waterborne coating is not affected by the presence of oxygen. The properties of the sunlight‐cured volatile organic compound (VOC)‐free pigmented paints prepared from the waterborne latex are as good or better than the equivalent conventional paint containing VOCs. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3171–3181, 2002     

钯（0）／离子交换树脂对有机锡试剂和有机卤化物偶联反应的催化性能和结构表征

制备了强碱性阴离子交换树脂（）负载钯（０）催化剂，发现它对有机锡试剂和有机卤化物的偶联反应有很高的催化活性，分离容易，可重复使用．起催化作用的是金属态把．ＸＰＳ等实验结果表明，在催化剂中钯作为桥将功能基－Ｎ（ＣＨ３）３与ＯＨ－联结起来．催化剂中的把可以看作是两配位的和配位不饱和的，经过氧化加成、金属交换、还原消除过程完成催化反应．     

构建网络学习资源提高民族高校有机化学课程教学质量

High-quality online course materials were reconstructed through feedback from undergraduate students and online data analysis regarding constructed learning materials on the Chao Xing Learning Platform. They were used for studying organic chemistry courses online and offline in university for nationalities. This model, based on student-centered teaching, can effectively transform students from passively accepting knowledge to actively learning and internalizing knowledge. This strategy can also enhance the students' learning initiative and the effects of learning, and hopefully be helpful to the universities in multi-ethnic areas in developing fundamental disciplined construction of organic chemistry and other courses.     

Molar excess heat capacities and volumes for mixtures of alkanoates with cyclohexane at 25°C

Molar excess volumes V ^E at 25°C have been determined by vibrating-tube densimetry, as a function of mole fraction x for different series of an alkanoate (H _2m+1 C _m COOC _n H _2n+1 )+cyclohexane. Three types of alkanoates were investigated, i.e., methanoates (m=0, with n=3 and 4), ethanoates (m=1, with n=2, 3, and 4) and propanoates (m=2, with n=1, 2, and 3). In addition, a Picker flow calorimeter was used to obtain molar excess heat capacities C _p ^E at constant pressure at the same temperature. V ^E is positive for all systems and rather symmetric, with V ^E (x=0.5) amounting to almost identical values in a series of mixtures containing an alkanoate isomer of same formula (say C₄H₈O₂, C₅H₁₀O₂, or C₆H₁₂O₂). The composition dependence of C _p ^E is rather unusual in that two more or less marked minima are observed for most of the mixtures, especially when the alkanoate is a methanoate or an ethanoate. These results are discussed in terms of possible changes in conformation of both the ester and cyclohexane.     

Preparation and Characterization of Nanotitanium Dioxide Coating Film Doped with Fe^3＋ Ions on Porous Ceramic

The nanotitanium dioxide （TiO2） photocatalytic and porous ceramic filtering technique is one of the advanced methods to effectively treat organic wastewater. The TiO2 sol doped with Fe^3＋ ions was prepared by sol-gel processing. The influences of the process conditions of coating nanophotocatalytic material- Fe^3＋-TiO2 film on the surface of porous ceramic filter by dipping-lift method on the performance of porous ceramic filter were studied. The porous ceramic filters have two functions at the same time, filtration and photocatalytic degradation. The results of this study showed that the pH and viscosity of the sol, amount of Fe^3＋ ions doped as well as the coating times greatly affect the quality of coating film, the performance parameters and the photocatalytic activity of the porous ceramic filter. When the pH of the sol is 3-4, the viscosity is about 6 mPa.S, the amount of doped Fe^3＋ ions is about 2.0 g/L, the porous ceramic filter has been shown to have the best filtering performance and photocatalytic activity. In this condition, the porosity of porous ceramic is about 42.5%, the pore diameter is 8-10μm. The degradation of methyl-orange is 74.76% under lighting for 120 rain.     

Printed plastic electronics and paperlike displays

Plastic electronic materials and high‐resolution printing methods may be important technologies for new classes of consumer electronic devices that are lightweight, mechanically flexible and bendable, and that can cover large areas at low cost. This article summarizes some of our recent work in this area. It focuses on the materials and patterning techniques that we used to produce plastic active‐matrix backplane circuits for a type of paperlike display. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3327–3334, 2002     

Comparative studies on a mesophilic and a thermophilic α-amylase

A comparative study was performed on thermal stability of mesophilic and thermophilic α-amylases, and the effects of various denaturing agents, organic solvents, and stabilizers were investigated. As expected, the thermophilic enzyme showed higher resistance toward denaturation in water as its natural medium, but such a difference could not be detected in nonaqueous environments. Furthermore, stability of these molecules was improved by including various stabilizing agents. Of the compounds tested, sorbitol provided the highest degree of protection, which was found to be owing to its effect on increasing T _m and its ability in totally preventing deamidation of amino acid residues in the protein molecules.