Polyurea microcapsules: Surface modification and capsule size control

A postmodification method for polyurea microcapsule (PUMC) surfaces using functional polyelectrolytes is reported in this article. Fluorescein isothiocyanate (FITC) was used to probe the chemistry on PUMC surface and label nucleophilic groups on the surface, in particular amines. As well, a fluorescently labeled polyanion containing electrophilic acetoacetate groups was used to covalently react with these nucleophilic groups on the PUMC surfaces. This modification causes charge reversion of the originally cationic PUMC and enables subsequent layer‐by‐layer (LbL) coating using other polyelectrolytes, allowing for covalent or noncovalent modification of the capsule surface. All modification steps were monitored using either laser scanning confocal microscopy or fluorescence microscopy. Optical and fluorescence microscopy of PUMC wall cross‐sections embedded in resin confirmed that the modifications were restricted to the outer surface of PUMCs, offering minimum interference of this modification method with other capsule wall properties. In addition, a simple T‐junction type microfluidic device based on a commercially available MicroTEE was designed to produce narrowdisperse PUMCs. This device was easy to set up and operate and was proved to be an useful tool for making monodisperse emulsions and narrowdisperse MCs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of Immobilized Metal Affinity Chromatographic Packings by Immobilization of Carboxymethylated Asparate (CM-Asp) Based on Monodisperse Hydrophilic Non-porous Beads and Their Application

The hydrophilic immobilized metal affinity chromatographic packing was prepared by immobilization of carboxymethylated asparate (CM‐Asp) as chelating ligand and Ni²⁺ as center ion on the base of monodispersed, 3.0 µm non‐porous monodisperse poly(glycidylmethacrylate‐co‐ethylenedimethacrylate) (P_GMA/EDMA) particles. The retention behavior of proteins and the effect of pH on the retention in the range from 4.0 to 9.0 were investigated on both the naked and metal ion chelated columns. Four proteins were quickly separated in 2.0 min with linear gradient elution at a flow rate of 3.0 mL·min^?1 by using the synthesized Ni²⁺‐CM‐Asp‐P_GMA/EDMA packings. The separation time was shorter than other immobilized metal affinity chromatography reported in the literature. The Ni²⁺‐CM‐Asp‐P_GMA/EDMA column was further investigated for the rapid separation and purification of copper‐zinc superoxide dismutase (Cu,Zn‐SOD) from the blood of pig in 3.0 min with only one step. The results obtained were satisfactory.     

基于单分散氟化物纳米晶的成核生长模型

在纳米介观尺度范围内实现对材料尺寸与形貌的调控,是纳米材料合成、制备、功能化及其应用的关键,对认识并解纳米晶的成核与生长规律具有重要意义.基于单分散氟化物纳米晶合成提出的扩散控制动力学模型(DCK,diffusion-controlled kinetic)和表面化学热力学模型(SCT,surface chemical thermodynamics)旨在探讨纳米晶的成核与生长规律.本文围绕纳米晶的成核、生长机理,在综述前人工作的基础上,归纳和总结了上述模型,有望对纳米晶的可控合成提供理论指导与借鉴.     

Facile and Rapid Solid Phase Synthesis of Monodisperse Oligo（1, 4-phenyleneethynylene）s

An extremely facile and rapid solid phase route free of column chromatographic purification for the synthesis of the soluble monodisperse oligo(l, 4-phenyleneethynylene)s up to-60A was presented.     

Rheological Properties of Silica Particle Suspensions in Mineral Oil

The rheological properties of particles suspended in a non‐polar mineral oil have been investigated as a function of volume fraction of particles, particle size, surface properties and shear rate. Three different types of particles were investigated; glass microspheres, monodisperse silica particles and fumed silica. The suspensions showed shear thinning behavior at higher volume fractions, and the viscosity increased with decreasing particle size. The hydrophobic particles display lass shear thinning effects. The relative viscosity of all the suspensions was well fitted to the Krieger and Dougherty model.     

Synthesis and properties of monodisperse multi‐triarylamine‐substituted oligothiophenes and 4,7‐bis(2′‐oligothienyl)‐2,1,3‐benzothiadiazoles for organic solar cell applications

Two novel series of monodisperse multi‐triarylamine‐substituted oligothiophenes, G ₂ ‐ OT ( n )‐ G ₂ with thiophene unit (n) varying from 6 to 8, and 4,7‐bis(2′‐oligothienyl)‐2,1,3‐benzothiadiazoles G ₂ ‐ OT ( n ) BTD ‐ G ₂ (n = 2, 4, 6) have been synthesized by the Suzuki coupling reactions. With an elongation of alkyl‐substituted oligothiophene core or an incorporation of benzothiadiazole into the central core, the absorption and emission spectra of G ₂ ‐ OT ( n )‐ G ₂ and G ₂ ‐ OT ( n ) BTD ‐ G ₂ series red‐shift substantially with the optical gap reducing to 1.95 eV for G ₂ ‐ OT ( 6 ) BTD ‐ G ₂ . Alkyl‐substitution onto oligothiophene backbone not only improves the solubility of the highly extended dendrimers but also renders coplanarity of the dendritic oligothiophene backbone at the excited state, which results in the enhancement of fluorescence quantum efficiency. The bulk heterojunction solar cells using these newly synthesized dendritic oligothiophenes as a donor material and [6,6]‐phenyl C₆₁‐butyric acid methyl ester (PCBM) as an acceptor material were fabricated and investigated which showed an increase in device performance as compared with those of the lower homologues. On increasing the loading of PCBM from 1.5 to 3 times in the active layer, there was also an enhancement in device performance with power conversion efficiencies of as‐fabricated solar cells increasing from 0.18% to 0.32%. In addition, proper annealing procedure could significantly improve the device performance of the dendrimer‐based photovoltaic cell. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 137–148, 2009     

Synthesis of Monodisperse α-Fe2O3 Particles in Short Periods

Asanimportantmaterialusedformagnetic,pigment,catalysis,gas-sensitiveandmedicalimagingapplications,monodispersehematite(a-Fe2O3)particleshaveattractedmoreattentionsinrecentyears1,2.Althoughvariousmorphologica-Fe2O3particleshavebeensynthesizedbyforcedhydrolysisprocess3,4,inwhichthepropertiesofa-Fe2O3particlesvaryconsiderablywithalargenumberofsynthesisparameterssuchaspH,theconcentrationofreactants,thecoexistentanionsetc.,thereisalackofmethodforpreparingmonodispersea-Fe2O3particlesinshortperiod…     

Alcoholic Solvent Effect on Silica Synthesis—NMR and DLS Investigation

The solvent effect on the synthesis of silica particles has been elucidated through the examination of hydrolysis rate and particle growth by 29Si NMR and Dynamic Light Scattering studies, respectively, in various alcoholic solvents. Kinetic data obtained from the NMR experiments indicate that the rate of hydrolysis is fastest in 1-butanol and the rates follow an unusual order of 1-butanol > methanol > ethanol > 2-propanol > 1-propanol. This order of the rates of hydrolysis is rationalized with two opposing factors, steric hindrance reducing the rate and decrease of hydrogen bonding enhancing the rate. The final particle size increases as the alcohol molecular weight increases. This might be due to decrease in polarity of the alcohols.     

Ferromagnetic glass on the base of aggregates of Ni amorphous nanogranules

We have studied theoretically (including computer simulations) magnetic properties of aggregates of ferromagnetic amorphous nanogranules in the presence of direct exchange between the neighboring granules and random anisotropy fields. We show that such a system can be considered as ferromagnetic glass. We demonstrate (basing on analytical considerations as well as on the results of numerical simulations) that the system is decomposed to clusters or domains with nearly collinear orientation of magnetization. The size of the domains depends on the ratio of the exchange interaction and random anisotropy. For quasi-2D structures we predict that the dipole-dipole interactions between the granules lead to a formation of magnetic vortices. Moreover, the computer simulations also reproduce the puzzling increase of the thermoremanent magnetization observed experimentally, which is expected to be a result of a temperature-dependent decrease in the anisotropy (or a temperature-dependent increase in the exchange). We also consider the structures with weak intergranular exchange and show that they are characterized by the presence of two critical temperatures.