Packings and stationary phases for biopolymer separations by HPLC

Summary Packings and stationary phases applied to high resolution separations of proteins, enzymes, and nucleic acids must satisfy a series of distinct criteria that are different from those usually required by HPLC of low molecular weight non-biologically active analytes. These requirements have been met through substantial improvements in classical gel media together with novel developments in silica supports, and have led to a family of products with tailor-made and reproducible properties. Supports consisting of cross-linked organic gels, and inorganic materials (mostly silicas) are now available with graduated particle sizes, pore sizes, porosities and surface areas as well as non-porous beads. A whole range of stationary phases, such as reversed phase, hydrophobic interaction, ion exchanger and affinity packings, were designed for application as chemical sensors for biopolymer recognition in adsorptive chromatography. The phase systems are operated in the gradient mode, giving high resolution and high peak capacities. In addition, aqueous liquid-liquid partitioning systems have been developed for the fractionation of proteins and nucleic acids. Size exclusion media complete the set of HPLC variants enabling a discrimination of proteins according to their size and shape in an isocratic elution mode. Basically, protein purification and isolation is a multistage process where-by the HPLC variants are combined in a logistic sequence, utilizing the different selectivities of the phase systems and thus maximising resolution, speed and throughput.     

双波长分光光度法测定湿法炼锌净化液中的痕量锗

选择水杨基荧光酮－乳化剂ＯＰ－盐酸为显色体系，应用双波长分光光度法扣除硫酸锌的基体干扰，不分离直接测定了湿法炼锌过程中硫酸锌净化液中的痕量锗。测定范围在０－４０ｍｇ／Ｌ。本法应用于株洲冶炼厂锌净化液中锗的测定，结果与该厂长期的萃取－比色法结果相吻合，而测定速度较萃取－比色法至少提高了一倍。     

Enhancement of signal-to-noise level by synchronized dual wavelength modulation for light emitting diode fluorimetry in a liquid-core-waveguide microfluidic capillary electrophoresis system

The signal-to-noise level of light emitting diode (LED) fluorimetry using a liquid-core-waveguide (LCW)-based microfluidic capillary electrophoresis system was significantly enhanced using a synchronized dual wavelength modulation (SDWM) approach. A blue LED was used as excitation source and a red LED as reference source for background-noise compensation in a microfluidic capillary electrophoresis (CE) system. A Teflon AF-coated silica capillary served as both the separation channel and LCW for light transfer, and blue and red LEDs were used as excitation and reference sources, respectively, both radially illuminating the detection point of the separation channel. The two LEDs were synchronously modulated at the same frequency, but with 180°-phase shift, alternatingly driven by a same constant current source. The LCW transferred the fluorescence emission, as well as the excitation and reference lights that strayed through the optical system to a photomultiplier tube; a lock-in amplifier demodulated the combined signal, significantly reducing its noise level. To test the system, fluorescein isothiocyanate (FITC)-labeled amino acids were separated by capillary electrophoresis and detected by SDWM and single wavelength modulation, respectively. Five-fold improvement in S/N ratio was achieved by dual wavelength modulation, compared with single wavelength modulation; and over 100-fold improvement in S/N ratio was achieved compared with a similar LCW-CE system reported previously using non-modulated LED excitation. A detection limit (S/N = 3) of 10 nM FITC-labeled arginine was obtained in this work. The effects of modulation frequency on S/N level and on the rejection of noise caused by LED-driver current and detector were also studied.     

发夹型荧光分子探针用于DNA甲基化酶的活性分析及其在药物筛选中的应用

报道了一种基于发夹型荧光探针的甲基化酶活性的分析方法, 甲基化酶和相应的限制性内切酶的识别位点被设计在发夹型探针的茎部, 四甲基罗丹明(TAMRA)被连接在探针的5'端, 其荧光被连在3'端的熄灭基团4-(4'-二甲基对胺基偶氮苯)苯甲酸(DABCYL)所熄灭. 限制性内切酶可切割未发生甲基化修饰的探针, 导致探针的发夹结构遭到破坏, 引起TAMRA荧光信号的恢复. 根据荧光信号的恢复程度可实现对甲基化酶活性的分析. 在此基础上, 建立了一种简便、快速分析抗肿瘤药物对DNA甲基化酶活性的影响的方法, 为筛选针对基因甲基化异常引起的恶性肿瘤的治疗药物提供了一种新的思路和方法.     

基于遗传算法的波长选择方法在绿茶近红外光谱分析模型中的应用

利用遗传算法(GA)提取茶叶的近红外吸收特征波长的方法,研究建立了绿茶水分和氨基酸的近红外分析模型,并对波长选择前后两种成分的模型进行了比较分析。结果表明,经遗传算法波长选择后,简化了分析模型,同时模型的稳健性增强。氨基酸预测集的均方根误差(SEP)减小82.1%,水分预测集的均方根误差减小(SEP)76.6%,它们在波长选择前后对应的分析波长数之比分别为995∶7和1990∶33。     

一种新型极性脲丙基-C30固定相的制备和性能评价

以3-脲丙基三甲氧基硅烷为偶联剂，制备了一种新型极性脲丙基-C30（TPU-C30）反相色谱固定相。采用扫描电子显微镜、元素分析、红外光谱和热分析等对该固定相进行表征。结果表明，TPU-C30固定相已成功制备，连续制备3次固定相，其元素含量的相对偏差均小于5%，说明该合成工艺重复性良好。以不同极性、位置异构、碱性化合物为溶质探针，以传统的C18色谱柱与C30色谱柱为参比，对制备的固定相的色谱性能进行了研究。研究结果表明，TPU-C30固定相具有不同于传统C18柱、C30柱的选择性和更优的择形性，明显改善了碱性物质的峰形，其具有广阔的应用空间。     

Electric field‐induced birefringence,optical rotatory power and conoscopic measurements of a chiral antiferroelectric smectic liquid crystal

Using a photoelastic modulator‐based novel set‐up, the electric field‐induced in‐plane birefringence and the optical rotatory power (ORP) were measured of an antiferroelectric liquid crystalline compound (12OF1M7) in its various phases using 30 µm homeotropic cells. Some specific signatures of the in‐plane birefringence and of the ORP for the various phases are being established. A relatively small threshold field is needed for the unwinding process of the antiferroelectric phase with a unit cell of four layers [SmC_A*(1/2)] compared with that for two layers [SmC_A*(0)]. On application of the electric field on the high temperature side of the SmC_A*(1/2) phase (80.1–81.5°C), a field‐induced phase transition is shown to occur directly to the SmC* phase, whereas on the lower temperature side (79.4–80.1°C) the transition takes place to SmC* via the SmC_A*(1/3) phase. The in‐plane birefringence exhibits a critical power law dependence for the SmC*–SmA transition. The ORP changes sign within the temperature range of the phase with a unit cell of three layers, reflecting a change in the handedness during this phase. Using tilted conoscopy, the results for the biaxiality and the apparent tilt angle for a smectic liquid crystal with a tilt angle greater than 18° in the ferroelectric phase are reported. The biaxiality implies the difference in the refractive indices between the two minor axes of the refractive index ellipsoid. The optical transmittance at visible and IR wavelengths for free‐standing films reveal characteristic reflection bands for these phases. The modulated structures of the reflected bands appear just above the SmC_A* phase and below SmC_A*(1/3); these are possibly due to an easy deformation of the phase by the surfaces.     

Breakdown Pattern of Hydrocarbons by Laser Breakdown Time-of-flight Mass Spectrometry

The laser breakdown time-of-flight mass spectrometry was developed and applied to detect the breakdown patterns of hydrocarbons that are significant to improve the detectability of heavy metals compounded in various mixtures such as particles and hydrocarbons. The laser wavelength dependence of this method was evaluated using 1064, 532, and 266 nm laser outputs. Breakdown processes using 1064 and 532 nm outputs showed less interference of fragmentation for the detection of various heavy metals. The method was applied to various hydrocarbons and it showed the possibility of categorization of hydrocarbon groups using the pattern of breakdown products.     

Single-Round DNA Aptamer Selection by Combined Use of Capillary Electrophoresis and Next Generation Sequencing: An Aptaomics Approach for Identifying Unique Functional Protein-Binding DNA Aptamers

In DNA aptamer selection, existing methods do not discriminate aptamer sequences based on their binding affinity and function and the reproducibility of the selection is often poor, even for the selection of well-known aptamers like those that bind the commonly used model protein thrombin. In the present study, a novel single-round selection method (SR-CE selection) was developed by combining capillary electrophoresis (CE) with next generation sequencing. Using SR-CE selection, a successful semi-quantitative and semi-comprehensive aptamer selection for thrombin was demonstrated with high reproducibility for the first time. Selection rules based on dissociation equilibria and kinetics were devised to obtain families of analogous sequences. Selected sequences of the same family were shown to bind thrombin with high affinity. Furthermore, data acquired from SR-CE selection was mined by creating sub-libraries that were categorized by the functionality of the aptamers (e. g., pre-organized aptamers versus structure-induced aptamers). Using this approach, a novel fluorescent molecular recognition sensor for thrombin with nanomolar detection limits was discovered. Thus, in this proof-of-concept report, we have demonstrated the potential of a “DNA Aptaomics” approach to systematically design functional aptamers as well as to obtain high affinity aptamers.