逐步增加Ⅱ型截尾下比例危险率模型的可靠性分析

基于逐步增加Ⅱ型截尾样本,分别在均方损失和Linex损失下,利用ML-Ⅱ方法研究了比例危险率模型的参数和可靠性指标的经验Bayes估计问题。为了研究估计结果的精确性,分析了一个实际应用例子,并利用Monte-Carlo方法给出一个数值模拟例子,结果表明在非对称Linex损失下,经验Bayes估计更具灵活性,且结果更加有效。     

Viscous quark‐gluon plasma in the early universe

In the present work a study is given for the evolution of a flat, isotropic and homogeneous Universe, which is filled with a causal bulk viscous cosmological fluid. We describe the viscous properties by an ultra‐relativistic equation of state, and bulk viscosity coefficient obtained from recent lattice QCD calculations. The basic equation for the Hubble parameter is derived by using the energy equation obtained from the assumption of the covariant conservation of the energy‐momentum tensor of the matter in the Universe. By assuming a power law dependence of the bulk viscosity coefficient, temperature and relaxation time on the energy density, we derive the evolution equation for the Hubble function. By using the equations of state from recent lattice QCD simulations and heavy‐ion collisions we obtain an approximate solution of the field equations. In this treatment for the viscous cosmology, no evidence for singularity is observed. For example, both the Hubble parameter and the scale factor are finite at t = 0, where t is the comoving time. Furthermore, their time evolution essentially differs from the one associated with non‐viscous and ideal gas. Also it is noticed that the thermodynamic quantities, like temperature, energy density and bulk pressure remain finite. Particular solutions are also considered in order to prove that the free parameter in this model does qualitatively influence the final results.     

Towards oscillation-free implementation of the immersed boundary method with spectral-like methods

It is known that, when the immersed boundary method (IBM) is implemented within spectral-like methods, the Gibbs oscillation seriously deteriorates the calculation of derivatives near the body surface. In this paper, a radial basis function (RBF) based smoothing technique is proposed with the intention of eliminating or efficiently reducing the Gibbs oscillation without affecting the flow field outside the body. Based on this technique, a combined IBM/spectral scheme is developed to solve the incompressible Navier–Stokes equations. Numerical simulations of flow through a periodic lattice of cylinders of various cross sections are performed. The results demonstrate that the proposed methodology is able to give accurate and nearly oscillation-free numerical solutions of incompressible viscous flows.     

Dependence of exchange bias on the field-cooled remanent magnetic state in Ni/NiO nanogranular samples

The magnitude of the exchange bias (EB) effect in nanogranular Ni/NiO samples (with Ni content between about 4 and 69 wt% and mean size of the Ni crystallites of the order of 10 nm) has been found to be strictly related to the increase in the remanent magnetization measured after field-cooling, with respect to the value after zero-field-cooling, normalized to the saturation magnetization. This allows describing the EB mechanism in terms of the fraction of the magnetic moments of the Ni nanocrystallites that irreversibly has aligned in the field direction during field-cooling, due to the exchange anisotropy, and that is effectively involved in the loop shift. Hence, the possibility of tuning EB by controlling the field-cooled remanent magnetic state is shown.     

王水溶样-电感耦合等离子体质谱（ICP-MS）法测定地质样品中的金

称取10.00 g样品放于马弗炉中700℃条件下焙烧后,加入约60 mL王水,盖上表面皿于低温电热板(1000 W)溶解40 min,加入5 mL动物胶(20 g/L),搅拌均匀后加入等体积的水,抽滤,滤液定溶至500 mL,分液后以10 ng/mL的Rh为内标建立了王水溶样-电感耦合等离子体质谱(ICP-MS)法快速测定地质样品中金的分析方法。方法适用于检测0.1~10μg/g品位的矿石样品,对国家一级标准物质GBW07209、GBW07808、GBW07809、GBW07300进行12次测定,其相对标准偏差RSD均小于5%,相对误差RE均小于2%。方法具有简单快速等优势,在实际应用中得到满意的结果。     

Hydrophobic deep eutectic solvent as a green extractant for high‐performance liquid chromatographic determination of tetracyclines in water samples

A green extractant, hydrophobic deep eutectic solvent was first introduced for extraction of tetracycline, oxytetracycline, and chlortetracycline from environmental water samples prior to high‐performance liquid chromatography determination. Deep eutectic solvents consist of methyltrioctylammonium chloride and various medium‐chain alcohols/acids, and are easy in preparation, low cost and toxicity, desirably biodegradable, and biocompatible. The overall time required for sample preparation was 6 min and the volume of organic solvent used for extraction was only 400 µL. Under the optimized extraction condition, the present method yielded low limit of detection (0.5–2.0 ng/mL), acceptable precision (relative standard deviations < 9.7%), good linearity from 2.0 to 500 ng/mL (r² ≥ 0.9991). This optimized procedure was applied for determination of tetracyclines in different water samples with desirable spiked recovery ranged from 77.5 to 87.6%. There is, therefore, a great potential to further expand application of the method for investigation of other ultra‐trace analyte(s) in environmental matrixes.     

2D/2D h‐BN/N‐doped MoS2 Heterostructure Catalyst with Enhanced Peroxidase‐like Performance for Visual Colorimetric Determination of H2O2

Recently, nanozymes have attracted extensive attention because of their advantages of combining nanomaterials with enzymes. Herein, hexagonal boron nitride (h‐BN) and nitride‐doped molybdenum disulfide (N?MoS₂) nano‐composites (h‐BN/N?MoS₂) were synthesized by facile and cost‐effective liquid exfoliation with a solvothermal method in nontoxic ethanol solution. The results show that h‐BN, as a co‐catalyst, can not only dope into the lattice of MoS₂ but also form a heterogeneous structure with MoS₂NSs. It expanded the layer spacing and specific surface area of MoS₂NSs, which was beneficial to the contact between the catalyst and the substrate, and resulted in a synergistic enhancement of the catalytic activity of hydrogen peroxide (H₂O₂) with MoS₂. A colorimetric determination platform of h‐BN/N?MoS₂‐TMB‐H₂O₂ was constructed. It exhibited a wide linear range of 1–1000 μM with a low limit of detection (LOD) of 0.4 μM under optimal conditions, high sensitivity and stability, as well as good reliability (99.4–110.0%) in practice, making the measurement system more widely applicable.1. Introduction     

顺序注射-化学发光法测定环境水样中痕量乐果

基于在盐酸溶液中,乐果在氢氧化钠介质中的水解产物被铈(Ⅳ)氧化而产生强烈的化学发光,并结合应用顺序注射技术,提出了SI-CL法测定环境水样中痕量乐果的方法。采用三区带进样模式,将试剂按以下方式组合:(a)0.3mol·L-1氢氧化钠溶液与8g·L-1 HPC溶液混合,(b)水样及(c)0.035mol·L-1硫酸铈铵溶液与1.2mol·L-1盐酸溶液混合。其进样体积依次为(a)200μL,(b)200μL和(c)80μL。化学发光强度与乐果的质量浓度在1~100μg·L-1和100~800μg·L-1两个范围内呈线性关系。检出限(3σ)为0.17μg·L-1。回收率在85.7%~119%之间。     

Application of a magnetic molecularly imprinted polymer for the selective extraction and trace detection of lamotrigine in urine and plasma samples

Magnetic molecularly imprinted polymers have been synthesized for the selective preconcentration and trace determination of lamotrigine (LTG) in urine and plasma samples. The magnetic nanoparticles were modified by tetraethyl orthosilicate and 3‐methacryloxypropyl trimethoxysilane before imprinting. The magnetic molecularly imprinted polymers were prepared via surface molecular imprinting technique, using Fe₃O₄ as a magnetic component, LTG as template molecule, methacrylic acid as a functional monomer, ethylene glycol dimethacrylate as a cross‐linker, and 2,2′‐azobisisobutyronitrile as a radical initiator in methanol/acetonitrile (50:50, v/v) as the porogen. The obtained sorbent was characterized using scanning electron microscopy, Fourier‐transform infrared spectroscopy, X‐ray diffraction, and thermal analysis. Separation of the sorbent from the sample solution was simply achieved by applying an external magnetic field. Determination of the extracted drug was performed by high‐performance liquid chromatography with UV detection. Under the optimum extraction conditions, the method detection limits were 0.7 μg/L (based on S/N of 3) for urine samples and 0.5 μg/L for plasma samples. A linear dynamic range of 1–1000 μg/L was obtained for LTF in plasma and urine samples. Finally, the applicability of the proposed method was evaluated by extraction and determination of LTG in urine and plasma samples.     

pH‐assisted homogeneous liquid–liquid microextraction using dialkylphosphoric acid as an extraction solvent for the determination of chlorophenols in water samples

In this study, a new pH‐assisted homogeneous liquid–liquid microextraction combined with HPLC with UV detection was developed for the determination of chlorophenols in water samples. In this approach, bis(2‐ethylhexyl) phosphate was used for the first time as the low‐density extraction solvent. In particular, 60 μL of bis(2‐ethylhexyl) phosphate was injected into the sample solution (5 mL) and dissolved completely in the sample solution while the pH was increased to 9. Afterwards, the pH of the sample solution was lowered to 1, and a cloudy solution was formed. At this stage, hydrophobic interactions between the analytes and the long double hydrocarbon chains of extraction solvent were expected to be the main forces driving extraction. A series of parameters that influence extraction were investigated systematically. Under the optimized conditions, the LODs and LOQs for the chlorophenols were 1.4–2.7 and 4.7–9.1 ng/mL, respectively. RSDs based on five replicate extraction of 100 ng/mL of each chlorophenols were <4.7% for intraday and 7.4% for interday precision. This method has been also successfully applied to analyze real water samples at two different spiked concentrations, and satisfactory recoveries were achieved.