Nitrogen‐Doped Carbon Dots: A Facile and General Preparation Method,Photoluminescence Investigation,and Imaging Applications

Carbon dots (Cdots) are an important probe for imaging and sensing applications because of their fluorescence property, good biocompatibility, and low toxicity. However, complex procedures and strong acid treatment are often required and Cdots suffer from low photoluminescence (PL) emission. Herein, a facile and general strategy using carbonization of precursors and then extraction with solvents is proposed for the preparation of nitrogen‐doped Cdots (N‐Cdots) with 3‐(3,4‐dihydroxyphenyl)‐L ‐alanine (L ‐DOPA), L ‐histidine, and L ‐arginine as precursor models. After they are heated, the precursors become carbonized. Nitrogen‐doped Cdots are subsequently extracted into N,N′‐dimethylformamide (DMF) from the carbogenic solid. A core–shell structure of Cdots with a carbon core and the oxygen‐containing shell was observed. Nitrogen has different forms in N‐Cdots and oxidized N‐Cdots. The doped nitrogen and low oxidation level in N‐Cdots improve their emission significantly. The N‐Cdots show an emission with a nitrogen‐content‐dependent intensity and Cdot‐size‐dependent emission‐peak wavelength. Imaging of HeLa cells, a human cervical cancer cell line, and HepG2 cells, a human hepatocellular liver carcinoma line, was observed with high resolution using N‐Cdots as a probe and validates their use in imaging applications and their multicolor property in the living cell system.     

Li+掺杂对Y2SiO5:Pr3+上转换发光性能影响

采用溶胶-凝胶法制备Li+掺杂改性的Y2SiO5:Pr3+上转换发光材料,考察了Li+掺杂对样品晶型及发光性能的影响。采用XRD,DSC-TGA,FS对所制备的材料进行表征,结果表明Li+掺入浓度在7%～8%(摩尔分数)之间会引起Y2SiO5晶体类型由X1型转变为X2型,且Li+掺入后样品转晶型温度由950℃降至800℃;样品经800℃煅烧处理后以X1型Y2SiO5为主相,850℃煅烧处理后以X2型Y2SiO5为主相;Li+掺入同时会提高Y2SiO5:Pr3+材料的上转换发光强度,Li+最佳掺杂浓度为10%,对于双掺杂Pr3+,Li+:Y2SiO5体系中Pr3+最佳掺杂浓度为1.2%。     

Strong Stokes and Upconversion Luminescence from Ultrasmall Ln3+‐Doped BiF3 (Ln=Eu3+, Yb3+/Er3+) Nanoparticles Confined in a Polymer Matrix

Heavy metal fluorides like BiF₃ as a host for lanthanide ions are of interest as bismuth is the only heavy metal that is nontoxic. In this work, we report the synthesis of highly water‐dispersible ultrasmall BiF₃ nanoparticles about 6 nm in size within a poly(vinyl pyrrolidone) matrix by a hydrothermal method. Microscopy analysis reveals that the nanoparticles are well separated and confined within the polymer network. These nanoparticles were found to be excellent hosts for lanthanide (Ln³⁺) ions. Through suitable Ln³⁺ doping, BiF₃ exhibits strong emissions in the visible region upon both UV and near infrared (NIR) excitations. The non‐toxicity of both bismuth and PVP can be advantageous for the potential use of BiF₃ nanoparticles in drug delivery and bioimaging.     

Ultrafast Fluorescence Spectroscopy via Upconversion and Its Applications in Biophysics

In this review, the experimental set-up and functional characteristics of single-wavelength and broad-band femtosecond upconversion spectrophotofluorometers developed in our laboratory are described. We discuss applications of this technique to biophysical problems, such as ultrafast fluorescence quenching and solvation dynamics of tryptophan, peptides, proteins, reduced nicotinamide adenine dinucleotide (NADH), and nucleic acids. In the tryptophan dynamics field, especially for proteins, two types of solvation dynamics on different time scales have been well explored: ~1 ps for bulk water, and tens of picoseconds for “biological water”, a term that combines effects of water and macromolecule dynamics. In addition, some proteins also show quasi-static self-quenching (QSSQ) phenomena. Interestingly, in our more recent work, we also find that similar mixtures of quenching and solvation dynamics occur for the metabolic cofactor NADH. In this review, we add a brief overview of the emerging development of fluorescent RNA aptamers and their potential application to live cell imaging, while noting how ultrafast measurement may speed their optimization.     

Mediated Generation of Conjugate Acid by UV and Blue Sensitizers with Upconversion Nanoparticles at 980 nm

NIR and UV exposure of systems comprising upconversion nanoparticles ( UCNP ) based on NaYF₄:Tm/Yb@NaYF₄, a sensitizer absorbing either in the blue or UV region, and an onium salt with weak coordinating anion resulted in formation of conjugate acid (con-H⁺). That was namely Ivocerin (di(4-methoxybenzoyl)diethylgermane), ITX (2-iso-propyl thioxanthone), anthracene, pyrene, rubrene, camphore quinone, and a strong fluorescent coumarin (1,1,6,6,8-pentamethyl-2,3,5,6-tetrahyhdro-1H,4H-11-oxa-3a-aza-benzo[de]anthracene-10-one). Quantification occurred by treatment with Rhodamine B lactone whose color switched to intensive red after photolytic formation of con-H⁺. Exposure with a NIR laser at 980 nm resulted in less con-H⁺ compared to 395 nm where all sensitizers absorb radiation. UCNP did not mainly interfered formation of con-H⁺. The different rates obtained in both experiments responsibly explain the failure and success to initiate polymerization of epoxides applying ether 980 nm or 395 nm excitation, respectively.     

Water‐Soluble Monolayer Molybdenum Disulfide Quantum Dots with Upconversion Fluorescence

Uniform water‐soluble monolayer MoS₂ quantum dots (MQDs) with lateral sizes of ≈2.1 nm, a clearly zigzag‐terminated edge, and a hexagonal lattice structure are achieved using ammonium molybdate, thiourea, and N‐acetyl‐l ‐cysteine (NAC) as precursors and the capping reagent in a facile one‐pot hydrothermal approach. MQDs have good dispersity and high stability in aqueous suspension and exhibit a significantly larger direct bandgap (3.96 eV) compared to monolayer MoS₂ nanosheets (1.89 eV). Pronounced blue‐shifts in the wavelengths of both the excitonic absorption and intrinsic state emission with activated strong luminescence at room temperature beyond monolayer MoS₂ nanosheets is demonstrated. Unusual upconversion photoluminescence is also observed and is caused by two successive transfers of energy from the near‐infrared (NIR) absorption generated by the NAC capping reagent to the hexagonal structure of MQDs. Additional optical properties of MQDs may provide numerous exciting technological applications. Here, MQDs are demonstrated as a highly selective fluorescent reagent for detecting tetracycline hydrochloride under UV and NIR irradiation.     

Effect of Yb3+ concentration on photoluminescence properties of cubic Gd2O3 phosphor

Yb³⁺ doped phosphor of Gd₂O₃ (Gd₂O₃:Yb³⁺) have been prepared by solid state reaction method. The structure and the particle size have been determined by X-ray powder diffraction measurements. The average particle size of the phosphor is in between 35 and 50 nm. The particle size and structure of the phosphor was further confirmed by TEM analysis. The visible and NIR luminescence spectra were recorded under the 980 nm laser excitation. The visible upconversion luminescence of Yb³⁺ ion was due to cooperative luminescence and the presence of rare earth impurity ions. The cooperative upconversion and NIR luminescence spectra as a function of Yb³⁺ ion concentration were measured and the emission intensity variation with Yb³⁺ ion concentration was discussed. Yb³⁺ energy migration quenched the cooperative luminescence of Gd₂O₃:Yb³⁺ phosphor with doping level over 5%, while the NIR emission luminescence continuously increases with increasing Yb³⁺ ion concentration.     

Sequence‐Dependent DNA Functionalization of Upconversion Nanoparticles and Their Programmable Assemblies

DNA‐modified lanthanide‐doped upconversion nanoparticles (DNA‐UCNPs) that combine the functions of DNA and the optical features of UCNPs have shown great promise in a wide range of fields. However, challenges remain in precisely tethering and orienting the DNA strands on the UCNP surface. Herein, we systematically investigate the sequence dependence of DNAs in their interactions with UCNPs, and reveal that poly‐cytosine (poly‐C) has high affinity for the UCNP surface. A general approach to synthesize monodispersed DNA‐UCNP conjugates is developed using poly‐C‐containing diblock DNA strands. The poly‐C segment of the DNA strand binds to the surfaces of UCNPs and the second segment is oriented perpendicularly on the UCNP surface, making the DNA‐UCNPs highly stable and monodispersed in aqueous solution. The dense layer of DNA on the UCNP surface enables the programmable assembly of UCNPs with other DNA‐functionalized nanoparticles or DNA origamis through hybridization, resulting in the formation of well‐organized complex structures.     

A Conjugated Polymer Containing Arylazopyrazole Units in the Side Chains for Field‐Effect Transistors Optically Tunable by Near Infra‐Red Light

Optically tunable field‐effect transistors (FETs) with near infra‐red (NIR) light show promising applications in various areas. Now, arylazopyrazole groups are incorporated in the side chains of a semiconducting donor–acceptor (D‐A) polymer. The cis–trans interconversion of the arylazopyrazole can be controlled by 980 nm and 808 nm NIR light irradiation, by utilizing NaYF₄:Yb,Tm upconversion nanoparticles and the photothermal effect of conjugated D‐A polymers, respectively. This reversible transformation affects the interchain packing of the polymer thin film, which in turn reversibly tunes the semiconducting properties of the FETs by the successive 980 nm and 808 nm light irradiation. The resultant FETs display fast response to NIR light, good resistance to photofatigue, and stability in storage for up to 120 days. These unique features will be useful in future memory and bioelectronic wearable devices.