Efficient oxidation of benzylic alcohols with [hydroxy(tosyloxy)iodo]benzene under microwave irradiation

An efficient method for the oxidation of benzylic alcohols with [hydroxy(tosyloxy)iodo]benzene under solvent-free microwave irradiation conditions is described.     

超声条件下芳基格氏试剂与4-烷基苯乙酮的反应

二芳基乙烯;超声条件下芳基格氏试剂与4-烷基苯乙酮的反应     

Microwave promoted amination of 3-bromoisoxazoles

This Letter describes the amination of 3-bromoisoxazoles by a nucleophilic aromatic substitution reaction. We have found 3-bromoisoxazoles to be inert to substitution under thermal conditions, however, the employment of phosphazene bases under microwave irradiation facilitates the amination process and allows the corresponding 3-aminoisoxazoles to be isolated in moderate yield.     

过碳酸钠-醋酸酐作用下的Baeyer-Villiger反应

在醋酸酐介质中, 过碳酸钠可以与酮进行Baeyer-Villiger反应, 将它们氧化成相应的酯。其中脂环酮的反应结果较好, 环内酯的产率约为80%。芳香酮除芳环被活化的以外, 效果欠佳。当反应施加超声辐射后可显著加快反应速度, 并对过碳酸钠的作用机理进行了讨论。     

Challenges in validating the sterilisation dose for processed human amniotic membranes

Most of the tissue banks in the Asia Pacific region have been using ionising radiation at 25 kGy to sterilise human tissues for save clinical usage. Under tissue banking quality system, any dose employed for sterilisation has to be validated and the validation exercise has to be a part of quality document. Tissue grafts, unlike medical items, are not produced in large number per each processing batch and tissues relatively have a different microbial population. A Code of Practice established by the International Atomic Energy Agency (IAEA) in 2004 offers several validation methods using smaller number of samples compared to ISO 11137 (1995), which is meant for medical products. The methods emphasise on bioburden determination, followed by sterility test on samples after they were exposed to verification dose for attaining of sterility assurance level (SAL) of 10⁻¹. This paper describes our experience in using the IAEA Code of Practice in conducting the validation exercise for substantiating 25 kGy as sterilisation dose for both air-dried amnion and those preserved in 99% glycerol.     

Facile Synthesis of 1, 2-Diazepine Derivatives under Microwave Irradiation

An efficient and convenient synthesis of 3, 5, 7-triaryl-4H-1, 2-diazepine from 2, 4,6-triarylpyrylium salts and hydrazine in water under microwave irradiation is reported. The same reaction can be conducted using 2, 4, 6-triarylthiopyrylium salts and hydrazine.     

Emulsion polymerization of methyl methacrylate under pulsed microwave irradiation

Emulsion polymerization of methyl methacrylate (MMA) under pulsed microwave irradiation (PMI) with higher peak pulse power was studied. The effects of various parameters of PMI on the polymerization were analyzed and compared with that under conventional heating (CH) process. The results were summarized, as compared with that under CH, as follows. The amount of initiator used to reach constant conversion reduced by 50% at the same polymerization time; at the same initiator concentration 0.15 and 0.2 wt.%, the polymerization rate increased by 131% and 163%, respectively. The molecular weight of polymer obtained was 1.1-2.0 times larger than that under CH; at the same irradiation energy, the conversion achieved using a lower pulse power was greater than that using a higher pulse power. There seemed to be a factor of the irradiation energy efficiency; in other words, for the monomer conversion, the irradiation energy of low pulse power had a higher efficiency. The conversion achieved using a 3.5 μs pulse width was almost the same as that using a 1.5 μs pulse width. The results indicated that PMI had a significant non-thermal effect on the emulsion polymerization of MMA so as to effectively enhance the polymerization rate. The glass transition temperature (T_g), the polydispersity index (PDI) and the regularity of the polymer obtained using two processes were similar, indicating that the physical properties and microstructure of the polymer were not modified by the use of microwaves.     

Microwave assisted green chemical synthesis of novel spiro[indole-pyrido thiazines]: a system reluctant to be formed under thermal conditions

Spiro [3H-indole-3,2′-[4H] pyrido [3,2-e]-1,3-thiazine]-2,4′ (1H) diones, a class of previously unknown compound which does not form under conventional conditions, can be prepared by treatment of ‘in situ’ generated 3-indolylimine derivatives with 2-mercaptonicotinic acid under microwave irradiation in absence of any solvent or solid support in 85-92% yields in 3-8 min. The facile one pot reaction is generalized for a variety of ketones and amines to give pure pyrido [3,2-e] thiazine derivatives, which do not require further purification processes.     

微波作用下2,5-二取代-1,3,4-噁二唑的合成

2 ,5 二取代 1 ,3 ,4 二唑可用作药品 ,光敏物质 ,闪烁体 ,激光材料 ,高分子液晶单体等[1- 5] 。一种是以芳香酸与水合肼作为原料用多聚磷酸作为脱水环合剂来合成此类化合物[6 ] ,另一种是由芳香酸转变为芳香酰氯或酯 ,再与水合肼反应得到单酰肼或二酰肼 ,最后用三氯氧磷[7] ,五氧化二磷和五氯化磷[8] ,一氯三甲硅[9] 脱水环合 ;此外 ,用水合肼和尿素合成得到的氨基脲代替水合肼 ,与芳香酸缩合合成二唑[10 ] ,这些方法共同的缺陷是 :环合时间较长 ,少者 4～ 5ｈ ,多则 8ｈ。近年来 ,微波技术在有机合成及其杂环化合物的合成中得到了广…     

Photochemical reactions of a dimethacrylate compound containing a chalcone moiety in the main chain

We synthesized the new photosensitive oligomer containing a chalcone moiety in the main chain by end-capping reaction of diepoxide compound with methacrylic acid. The chalcone-epoxy oligomeric compound was synthesized with 4,4^′-dihydroxychalcone and epichlorohydrin. Investigation of the photosensitivity of the newly synthesized chalcone oligomer was carried out by using UV-Vis absorption and infrared spectroscopies under UV exposure. We observed the photodimerization behavior under UV irradiation. At the same time, we could also observe the photopolymerization of the compound with a trace amount of dimethoxyphenyl acetophenone. Thermal properties of UV-cured dimethacrylate compounds were also studied.