[Co(amp)2Cl2]2[ZnCl4]体系中两对称异构体的2D NMR研究

The two symmetrical isomers in [Co(amp)₂Cl₂]₂[ZnCl₄](amp=2-(Aminomethyl)pyridine) system were syn-thesized by general oxidation method and were separated by chromatography and recrystallization method. Their configurations were assigned by using 2D NMR techniques, particularly the NOESY NMR spectra. Solvent used was Me₂SO-d₆ with the central peak of the CD₃ septet as the reference ( ₁₃C,δ 39.37; ₁H,δ 2.49 relative to SiMe₄). Cation exchange media used was Dowex 50Wx 2(H⁺ form, 200～400mesh; Biorad).     

负载型无铬超细铁基变换催化剂的制备和催化性能

 以镁铝尖晶石为载体，以过渡金属氧化物为助剂，用吸附γ－Fe2O3胶体法制备了负载型无铬铁基变换催化剂．TEM，XRD，BET和活性测试结果表明，采用胶体负载法制备的变换催化剂，其活性组分Fe3O4以分立的超细微颗粒分布在镁铝尖晶石载体表面上，颗粒之间存在一定的间隔．过渡金属氧化物NiO或V2O5能够进入Fe3O4晶格形成固溶体，起到代替氧化铬的作用，提高催化活性．负载型催化剂FeNi／MgAl2O4（m（NiO）／m（Fe2O3）＝3％）在汽／气比为1和空速为2000h－1的反应条件下，CO转化率在400和350℃时分别为95％和80％；在高空速和低汽／气比条件下也具有很好的催化性能．稳定性实验结果表明，该催化剂 具有良好的热稳定性和一定的抗硫能力．与非负载型催化剂相比，负载型催化剂具有更为优越的催化性能．     

Chemical preparation and investigation of Fe-P-B ultrafine amorphous alloy particles

A series of Fe-P-B ultrafine amorphous alloy particles has been prepared by the chemical reduction method The composition and size of the particles have been effectively adjusted.Mossbauer spectroscopy in addition to sonic other techniques has been used to investigate the reaction process,the factors that influence the preparation,the crystallization of the particles,and the interactions between the components within them.The results indicate that the co-deposition of iron,phosphorus and boron atoms in the solution at room temperature forms Fe-P-B amorphous alloy particles,and a preferential bonding of Fe-P bond to Fe-B one exists in the particles.     

固相配位化学反应研究——ⅩⅩⅩⅩⅠ.[Co(NH_3)_5(H_2O)]Br_3,[Cr(NH_3)_5(H_2O)](NO_3)_3与无机盐KY(Y=Cl,Br,Ⅰ)的固相反应动力学研究

本文主要用气相色谱逸出气体分析方法,借助于红外、紫外可见漫反射谱等手段研究了[Co(NH_3)_5(H_2O)]Br_3、[Cr(NH_3)_5(H_2O)](NO_3)_3与无机盐KY(Y=Cl,Br,Ⅰ)的固相反应,计算了失水与失氨的动力学参数,发现第一步反应失水生成一取代中间产物,其活化能与外加阴离子无关,为S_N1过程。第二步失氨反应活化能与中心离子M以及取代基Y有关,当M=Co(Ⅲ)时,反应体系的失氨活化能大小有下列顺序:Cl>Br>Ⅰ(E值分别为187、155、98kJ·mol~(-1)),M=Cr(Ⅲ)时则正好相反:Ⅰ>Br>Cl(E值分别为213、146、79 kJ·mol~(-1))。     

酞菁铜与Q-CdS超微粒子界面的光致电荷转移研究

半导体超微粒子与有机分子界面的光致电行转移过程是当前光化学和材料科学研究的一个活跃领域［‘，2］；研究的目的主要有两个方面，一是研究半导体超微粒子表面光致电行转移的特性；二是研究有机分子对超微粒子的光敏化作用．目前，超微粒子的功能化研究日益深入，其独特的光     

Synthesis of ultrafine SiC from rice hulls (husks): A plasma process

Heat-treated rice hulls have been used as precursor material for synthesis of ultrafne SiC in a RF plasma reactor. Rice hulls containing finely distributed silica and active carbon act as a source for SiC formation. The plasma-synthesized powder contained ultrafnc -SiC with excess carbon and some unreacted silica. Post-treatment processes such as oxidation and acid (HF) treatment appear to be effective in removing the excess carbon and silica.     

水热法合成多金属氧酸盐棒状超细晶体

以SrCl₂·6H₂O、(NH₄)₆P₂Mo₁₈O₆₂·nH₂O为原料，在PEG-600/H₂O微乳体系中于80～130 ℃温度下水热反应8～12 h，从而制得一种多金属氧酸盐棒状超细晶体，组成是Sr₃P₂Mo₁₈O₆₂·nH₂O。该超细晶体具有长棒状形貌、高结晶度且分散性能较好，长度范围在10.0～20.0 μm，径度在1.0～2.0 μm。对反应体系中的PEG-600/H₂O体积比(V_PEC-600∶V_H2O)、水热温度以及(NH₄)₆P₂Mo₁₈O₆₂·nH₂O/SrCl₂·6H₂O质量比(W_POMs∶W_SrCl2·6H2O)3个影响因素进行了探讨，结果表明：V_PEC-600∶V_H2O主要对棒状超细晶体的形貌、长径比以及晶体结晶度有着重要影响，体积比在范围V_PEC-600∶V_H2O=(1.50～2.00)∶1.00有利于大长径比的棒状超细晶体的形成；水热温度则优选80～130 ℃范围，过低则不发生反应，过高则发生了多金属氧酸盐与PEG-600的氧化-还原反应；W_POMs∶W_SrCl2·6H2O基本上不影响超细晶体的形成。还初步探讨了该棒状超细晶体的形成机理。     

Ein neues Kupfercobaltboratoxid mit isolierten B2O5-Baugruppen: Cu2Co(B2O5)O

On a New Copper Cobalt Borate Oxide with Isolated B₂O₅ Units: Cu₂Co(B₂O₅)O Single crystals of a new compound with the empirical formula Cu₂CoB₂O₆ were obtained by using a B₂O₃ flux technique. X-ray single crystal technique led to a new structure type. Cu₂CoB₂O₆ crystallizes monoclinic, space group C-P2₁/c (No. 14); a = 3.2250(6); b = 14.847(1); c = 9.1171(6) Å; β = 93.67°; Z = 4. All metal sites are octahedrally coordinated and form a two dimensional framework consisting of edge sharing octahedra ribbons. In addition one observes isolated B₂O₅-units and oxygen which is not coordinated to boron. The far relation to the crystal structure of the mineral Warwickite is illustrated.     

Metallic Particles from Complexing Microcapsules Dispersed in a Silica Gel

A new process to control the distribution of metal nanoparticles is proposed. It involves the use of complexing microcapsules obtained by interfacial polycondensation. The latter are hollow spheres constituted of a polymer membrane, containing an insoluble active ingredient, such as a polyacrylic acid, which can complex Co²⁺ ions. These capsules are dispersed in a silica sol followed by thermal treatments and reduction under H₂ which results in metallic Co nanoparticles confined in the capsules domains. The particles do not diffuse in the matrix.     

Additive telluromolybdates. Structure and catalysis in oxidation

Additive telluromolybdates, MoO₃·2TeO₂ and M^IIO·TeO₂·MoO₃ (M^IITeMoO₆; M^II = Co, Mn, Zn), converted ethyl lactate selectively to pyruvate in a vaporphase fixedbed flow system at 250–300 °C. A synergy in activity was observed for binary TeO₂–MoO₃, and crystalline Te₂MoO₇ was suggested as the active species. The Rietveld analysis of powder XRD patterns of ternary CoTeMoO₆ revealed the layer structure quite different from that of the reference Te₂MoO₇, but tellurium was again located adjacent to molybdenum linked through lattice oxygen.