Controlled synthesis of selenium of different morphologies at room temperature

A facile and convenient chemical precipitation route has been developed for the controlled growth of selenium nanowires and hierarchical microspheres at room temperature, with Na₂SeO₃ and hydrazine hydrate as starting materials in the presence of 1,2,3‐trimethylimidazolium tetrafluoroborate (tmimBF₄). The surface morphology of microspheres can be tuned by adjusting the reaction media. The products were characterized by X‐ray powder diffraction (XRD) and scanning electron microscope (SEM). Possible formation mechanisms of selenium nanowires and microspheres are proposed, respectively. The influences of the nature of reaction media, agitation and tmimBF₄ on the morphologies development were experimentally investigated and it was found that these factors were of great importance for the formation of Se morphologies. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Ba2+沉淀法提取生物油馏分中的酚类物质

从NaOH试剂浓度、反应温度与反应时间三个方面,对钡离子沉淀法提取不同温度段收集的生物油馏分中的酚类物质进行了实验研究,并利用气相色谱-质谱联用仪（GC-MS）对提取效果进行了分析。实验结果表明,钡离子沉淀法对愈创木酚类物质的提取效果较为突出,且NaOH浓度（1.0-6.0mol/L）、反应温度（30-50℃）与反应时间（10-40min）对愈创木酚的提取率影响较大。在NaOH浓度为5.5mol/L、反应温度为35℃、反应时间为20min时,提取率达到最大,其中,三个温度段收集的生物油即低温水相馏分、低温油相馏分与高温馏分中的愈创木酚提取率分别为34.1%、33.8%和33.5%。     

Polycyclic aromatic hydrocarbon and ionic compositions of atmospheric bulk deposition samples at a national park under the influence of intense barbecue smoke

The main aim of this study was to present the effects of barbecue smoke on a small-scale environment, a national park under the influence of intense barbecue smoke, and to scientifically support the sustainable usage of the park. Twelve-weekly bulk deposition samples were collected directly at the barbecuing area, and the samples were analysed for 16 US EPA’s priority PAH compounds and major ions. The mean concentrations of the individual PAHs in the bulk deposition samples ranged from 11.8 ng L^?1 (Ane) to 1085 ± 581 ng L^?1 (IcdP). The most frequently observed PAH compounds in the bulk deposition samples were Np, Anp, Flr, Phe, An, Flu, BkF, BaP and IcdP. The mean total PAH deposition fluxes were determined as 3.6 ± 5.6 µg m^?2 day^?1. The chloride, potassium and the sulphate fluxes were determined as 145.2 ± 267.8 µg m^?2 day^?1, 182.9 ± 291.9 µg m^?2 day^?1, and 111.9 ± 65.9 µg m^?2 day^?1, respectively. Dominant ions in the bulk deposition samples were potassium ion, chloride and sulphate which addressed as the fingerprint of barbecue grilling.     

某些分析化学实验教材中均相沉淀概念的误区

目前,均相沉淀法在大学分析化学实验中已很少采用。高锰酸钾间接滴定法测定钙含量是大学分析化学实验中的经典实验之一,历史上存在均相沉淀法和传统沉淀法2种不同的沉淀操作。虽然我国现有大学分析化学实验中已不采用均相沉淀法进行该实验,但在某些分析化学实验教材中,却存在概念混乱的现象,即把传统沉淀法称作均相沉淀法。对这种现象进行了探讨和总结。     

Square‐wave Voltammetry of Two‐step Surface Electrode Mechanisms Coupled with Chemical Reactions – A Theoretical Overview

Square‐wave voltammetry (SWV) of so‐called “surface redox reactions” is seen as a simple and efficient tool to quantify large number of drugs, physiologically active substances and other important chemicals. It also provides elegant methods to get access to relevant kinetic and thermodynamic parameters related to many lipophilic compounds. Moreover, with this technique we can study activity of various enzymes by exploring the “protein‐film voltammetry” set up. In this work, we focus on theoretical SWV features of four complex surface electrode mechanisms, in which the electron exchange between the working electrode and the studied redox substrate takes place in two successive steps. While we present large number of calculated square‐wave voltammograms, we give hints to recognize particular two‐step surface mechanism, but also to distinguish it from other similar mechanisms. We present plenty of relevant aspects of surface two‐step surface EE, two‐step surface ECE and surface catalytic EEC’ mechanisms. Moreover, we present for the first time a series of theoretical results related to two‐step surface EECrev mechanism (i. e. two‐step surface reaction coupled to follow‐up reversible chemical step). The simulated voltammetric patterns presented in this work can bring relevant aspects to resolve some experimental situations met in voltammetry of many redox enzymes and other important substances whose electrochemical transformation occurs in two‐steps.     

地基高频加热激励ELF/VLF波对辐射带高能电子的准线性散射

地球内、外辐射带电子通量的变化对于空间飞行器,尤其是中低轨卫星的防护有着非常重要的影响.基于回旋共振波粒相互作用的准线性理论,使用地基高频发射器发射电波调制低电离层背景电流可以人工激励ELF/VLF波,这些波能使辐射带相对论电子发生抛射角散射沉降进入大气层从而降低其生存期.为了定量地分析人工激励ELF/VLF波散射辐射带高能粒子的可行性,针对内、外辐射带,本文选取了两个典型区域：L=4.6和L=1.5.数值计算结果表明,在内、外辐射带由于ELF/VLF波的人工注入而造成的高能电子损失时间尺度很大程度上取决于冷等离子体参量α^*(∝B²/N₀,这里B是背景磁场,N₀是电子数密度)、电波频谱特性和功率,以及与波发生回旋共振的电子能量.一般来讲,在外辐射带人工ELF/VLF哨声波散射相对论电子使之沉降到大气层要容易得多;低能量的高能电子(200keV)要比高能量的相对论电子(500keV)更有效地通过抛射角散射进入大气层.考虑到高频电波加热电离层激励的ELF/VLF波可能会被捕获在磁层空腔中,来回反射从而得到增强,因此在适当的条件下,地基高频加热装置发射足够的电波功率进入电离层诱导大幅度ELF/VLF波注入到内磁层,能够在1至3天的时间尺度内快速散射外辐射带相对论电子使之沉降,也能够在10天量级的时间尺度里散射生存周期一般为100天甚至更长的内辐射带相对论电子. 关键词： 地基高频加热电离层 ELF/VLF波激励 高能电子散射和沉降 共振波粒相互作用     

棒状LiZnPO4的低温合成与表征

LiZnPO₄的性能与其形貌密切相关,其合成常用的固相法和水热法均无控制其微观形貌的优势。 本文采用改进的沉淀法成功合成了具有棒状结构的LiZnPO₄。 利用热重-差热分析仪(TG-DSC)、X射线衍射仪(XRD)、傅里叶变换红外光谱(FTIR)以及场发射扫描电子显微镜(FE-SEM)等技术研究了LiZnPO₄形成过程、晶相组成、微观结构和形貌。 同时探究了合成方法、煅烧温度、煅烧时间、酸的种类对LiZnPO₄形貌的影响。 结果表明,相比较于固相法,以醋酸为原料的改进沉淀法不仅可以有效降低LiZnPO₄的合成温度至500 ℃,而且很容易控制棒状LiZnPO₄的形成。 在600 ℃下煅烧2 h后可以获得分散性良好、横截面为矩形、直径约为2 μm的规则棒状LiZnPO₄。 此外,对比颗粒状LiZnPO₄和棒状LiZnPO₄的光响应能力,发现棒状LiZnPO₄的光响应能力明显增强。     

Stable H and O isotope-based investigation of moisture sources and their role in river and groundwater recharge in the NE Carpathian Mountains,East-Central Europe†

The region situated between the mountain area and the lowlands in NE Romania (East-Central Europe) is experiencing increased competition for water resources triggered by a growing population, intensification of agriculture, and industrial development. To better understand hydrological cycling processes in the region, a study was conducted using stable isotopes of water and atmospheric trajectory data to characterize regional precipitation and vapour sources derived from the Atlantic Ocean, Mediterranean and Black Seas, as well as recycled continental moisture, and to assess and partition these contributions to recharge of surface and groundwater. Atmospheric moisture in the lowlands is found to be predominantly delivered along easterly trajectories, while mountainous areas appear to be dominated by North Atlantic Ocean sources, with moisture transported along mid-latitude, westerly storm tracks. Large-scale circulation patterns affect moisture delivery, the North Atlantic Oscillation being particularly influential in winter and the East Atlantic pattern in summer. Winter precipitation is the main contributor to river discharge and aquifer recharge. As winter precipitation amounts are projected to decrease over the next decades, and water abstraction is expected to steadily increase, a general reduction in water availability is projected for the region.     

Effect of low-salinity water on asphaltene precipitation

The effect of low-salinity (1000 to 5000?ppm) and intermediate-salinity (5000 to 40000?ppm) water (MgSO₄, MgCl₂, Na₂SO₄, CaCl₂, NaCl and KCl) on asphaltene precipitation was investigated in this work. The results revealed that all brines intensify the amount of asphaltene precipitation. All cases exhibited initial downward trend followed by the upward trend for the amount of asphaltene precipitation with increasing the brine concentration. A similar trend was also observed for Interfacial Tension (IFT) between crude oil and brine in this study. IFT was tested for MgSO₄, MgCl₂, Na₂SO₄, CaCl₂, NaCl and KCl brines with concentrations of 1000 to 40000?ppm. Finally, experimental results showed that an increase in volume of all brines in the mixture (brine +oil) led to increase and decrease of the asphaltene precipitation in low and intermediate salinity regions, respectively.     

Reflux Precipitation Polymerization: A New Platform for the Preparation of Uniform Polymeric Nanogels for Biomedical Applications

Reflux precipitation polymerization (RPP) represents an effective approach that enables to prepare various types of polymeric nanogels with precise control over the morphology and structure. Owing to facile loading or modification by a variety of functional moieties, rationally designed nanogels pose the possibility to attain a platform for tailoring functional properties that could be widely used for various biomedical applications, such as multifunctional drug delivery, enrichment of functional peptides, separation of specific proteins, as well as detection of circulating tumor cells. This feature article highlights RPP as a promising polymerization strategy that provides access to facile generation of modular nanostructures or multifunctional properties in a diverse range of biomedical applications, proving that RPP has great potential to become one of the most attractive polymerization techniques in polymer chemistry.