分离流动的脉冲热线测量方法研究与应用

1引言分离流动经常出现在许多实际流动中，对流体机械和飞行器产生重大影响。但由于这种流动具有方向性，变化快，给测量带来了困难。到目前为止，主要有以下三种测量方法：山激光多普勒测速治（＊D川；（2）飞行热线（F坊In含＊。卜w让e）；O）脉冲热线技术（PulsedAVire。‘脉冲热线”比“激光多普勒测速仪”价格低一个数量级，操作简单，是一种比较理想的测量技术。其原理最初由Baner山提出，随后经过BradburyP］，Eaton问，Castro＊和Fernholz问等人不断发展与完善，目前国外正推广应用在分离流动的研究中。但在国内，尚不多见其…     

各向同性湍流中颗粒引起湍流变动的直接模拟

本文通过直接数值模拟对均匀各向同性湍流中颗粒对湍流的变动作用进行了研究.颗粒相的体积分数很小而质量载荷足够大,以至于颗粒之间的相互作用可以忽略不计,而重点考虑颗粒与湍流间能量的交换。颗粒对湍流的反向作用使得湍动能的耗散率增强,以至于湍动能的衰减速率增大.湍动能的衰减速率随颗粒惯性的增大而增大。三维湍动能谱显示,颗粒对湍动能的影响在不同的尺度上是不均匀的。在低波数段,流体带动颗粒,而高波数段则相反.     

表面传导电子发射显示器件电场分布的理论研究

利用电磁理论对表面传导电子发射显示器件的单个子像素在笛卡尔坐标系内建立合理的电学物理模型，对内部电场强度和电势进行了深入研究，推导出了模型不同部分的面电荷密度、电场强度和电势的表达式.为了形象地表征其电学特性，利用MATLAB 6.5对电场强度和电势的分布情况进行了模拟，从理论上对模拟曲面给出了合理的解释，分析了子像素内部电子的发射机理和电学行为，并与电子多重散射模型和惯性离心模型进行了对比，解释了SED阳极电流形成的重要原因.在误差允许的范围内，本模型有关电场强度分布的结论与惯性离心模型一致. 关键词： 表面传导电子发射显示 遂穿效应 面电荷密度 电场强度     

沿直线的垂直方向匀速直线运动的带电直线的电场

本文利用相对论变换关系计算了沿直线的垂直方向匀速运动的带电直线的电场.     

Comparative Study on Large and Small Signal Theory for Intensity Modulation Response of Semiconductor Lasers Including Higher-Order Dispersion Terms

In this article, the comparison of large signal theory and small signal theory has been done with dispersive propagation of optical signal with IMDD (Intensity Modulation Direct Detection) systems for semiconductor lasers with higher-order dispersion terms. The expressions for an exact large signal theory and small signal theory including higher-order dispersion terms for propagation of an optical wave with sinusoidal amplitude and frequency modulation in a dispersive fiber have been derived. It is observed that small signal theory is more sensitive compared to large signal theory in terms of intensity modulation/direct detection systems. Also, it is reported that for large signal analysis the higher-order effects of dispersion can be ignored, whereas for small signal theory, the higher-order effects can be ignored for lower modulation frequencies only. The variation in the transfer function for various values of modulation indices are greater for small signal analysis than for large signal analysis. Also, as the intensity modulation index is increased, there is a decrease in the value of transfer function. The large signal model approximates the small signal model for lower values of the intensity modulation index.     

导体壳内外的电场彼此独立的简易证明

本文提供了一种证明导体壳的内外电场彼此独立的简易方法.     

外加电场下激光诱导Al等离子体特性的实验研究

由Q-Nd:YAG脉冲激光(波长1.06μm,脉宽10 ns)烧蚀Al靶产生等离子体.观测了在低气压和直流电场条件下的Al等离子体发射光谱.研究了激光功率密度和直流电场对各谱线强度的影响,分析了谱线半高全宽与外加电压,等离子体电子温度与激光能量的变化规律.结果表明,直流电场对铝原子谱线强度有显著的增强,铝原子谱线的半高全宽与直流电场的外加电压基本上呈线性关系.     

Modeling plane turbulent Couette flow

Among the salient features of shear-driven plane Couette flow is the constancy of the total shear stress (viscous and turbulent) across the flow. This constancy gives rise to a quasi-homogenous core region, which makes the bulk of the flow substantially different from pressure-driven Poiseuille flow. The present second-moment closure study addresses the conflicting hypotheses relating to turbulent Couette flow. The inclusion of a new wall-proximity function in the wall-reflection part of the pressure-strain model seems mandatory, and the greement with recent experimental and direct numerical simulation (DNS) results is encouraging. Analysis of model computations in the range 750 ≤ Re ≤ 35,000 and comparisons with low-Re DNS data suggest that plane Couette flow exhibits a local-equilibrium core region, in which anisotropic, homogeneous turbulence prevails. However, the associated variation of the mean velocity in the core, as obtained by the model, conflicts with the intuitively appealing assumption of homogeneous mean shear. The constancy of the velocity gradient exhibited by the DNS therefore signals a deficiency in the modeled transport equation for the energy dissipation rate.     

Characterization of strongly interacted multiple cracks in an infinite plate

Based on the Kachanov method and the alternating iteration technique, a new method is proposed to deal with the problem of the strongly interacted multiple cracks in an infinite plate. Unlike the Kachanov method which neglects the interaction of the tractions of the non-uniform components, the tractions of the non-uniform components on the surfaces of cracks are considered through the alternating technique. The accuracy and efficiency of present method are validated by comparing the results of two collinear and two parallel overlapped open the cracks obtained by the present method with those of the exact solutions, the results of the Kachanov method and the alternating iteration technique. Applications of present method in solving sliding close crack problems and evaluating the plastic zones demonstrate the versatility of present method.