Electrothermal atomic absorption spectrometric determination of cadmium in environmental samples with niobium wire preconcentration method

A preconcentration method by adsorption of cadmium on a niobium wire was developed for the environmental waters, followed by electrothermal atomic absorption spectrometry with a tungsten tube atomizer. After the preconcentration, the niobium wire was directly inserted into the tungsten tube atomizer. In the preconcentration (adsorption) process of cadmium, the optimal immersing time was 60?s. The effects of large amounts of concomitants on the preconcentration of cadmium were evaluated. When 10³–10⁴ fold excess of matrix elements existed in aqueous solution at pH 4 and 9, the cadmium response was profoundly affected by the matrix elements. However, the cadmium absorption signal was not significantly influenced at pH 7. Therefore, pH 7 was selected for the application into the real environmental samples. Under the optimal conditions, the detection limit (3S/N) for cadmium by the niobium wire preconcentration method was 7.0?pg?mL^?1 and the relative standard deviation was 6.8%. The method with preconcentration on a niobium wire was applied to the determination of cadmium in water and proved to be sensitive, simple and convenient. Because this preconcentration method can be utilized in the in situ treatment of trace cadmium in environmental water samples, it was unnecessary to carry the water samples to the analytical work place. The technique was shown to be useful for the determination of cadmium in environmental water samples at 0.1–1?µg?L^?1 levels.     

A Click Approach to Polymetallic Chromium(0) and Tungsten(0) Fischer‐Carbene Complexes and Their Use in the Synthesis of Functionalized Polymetallic Metal?Carbene Complexes

Alkynylamino Cr⁰ and W⁰ Fischer carbenes undergo a CuAAC reaction with a diverse range of di‐, tri‐, and tetra‐azides to produce polymetallic chromium(0) and tungsten(0) (Fischer)‐carbene complexes in good‐to‐excellent yields. This method is simple, versatile, and is suitable for the preparation of a diverse range of structures with a high level of symmetry. Moreover, the resulting polymetallic carbene complexes are suitable partners for the peripheral functionalization of the metal nuclei, whilst retaining the metal fragment. This fact has been demonstrated in a simultaneous Pauson–Khand reaction, which, in some cases, allows for the generation of four bicyclic [5,5] rings on the periphery of a tetrametallic molecule in a process that involves the formation of 12 new C? C bonds, with four simultaneous CO‐insertion processes. The electrochemistry of the polymetallic Fischer carbenes show completely independent behavior for each nucleus, as well as an anomalous observation of the reversible oxidation of the allyl substituents, which has not been reported before in this class of chemistry.     

氮化钨-钨/掺氮有序介孔碳复合材料的制备及其氧还原性能

采用软模板法制备了氮化钨-钨/掺氮有序介孔碳复合材料（WN-W/NOMC）,作为一种高比表面积且价格低廉的阴极氧还原反应催化剂。通过适量添加尿素来改变复合材料中的氮含量,在掺氮量为7%（w/w）时,实验发现材料能够保持完整有序介孔结构,测试其比表面积高达835 m²·g^-1,透射电子显微镜（TEM）测试结果显示其催化颗粒均匀地分散在氮掺杂有序介孔碳载体上。在O₂饱和的0.1 mol·L^-1 KOH溶液中测试了材料的氧还原催化性能（ORR）,显示其起始电位为0.87 V（vs RHE）,极限电流密度为4.49 mA·cm^-2,氧还原反应的转移电子数为3.4,接近于20%（w/w）商业Pt/C的3.8,说明该材料表现出近似4电子的氧还原反应途径。研究结果表明,WN-W/NOMC的催化性能虽然稍弱于商业铂碳（0.99 V,5.1 mA·cm^-2）,但其具有远超铂碳的循环稳定性和耐甲醇毒化能力。     

桥头碳上氮杂芳基功能化的双吡唑甲烷与羰基钨反应

研究了(氮甲基咪唑-2-基)双(3,5-二甲基吡唑)甲烷(L¹),2-吡啶基双(3,5-二甲基吡唑)甲烷(L²)及4-吡啶基双(3,5-二甲基吡唑)甲烷(L³)与羰基钨的反应,合成了一系列以单齿,双齿及三齿氮配位的羰基金属衍生物LW(CO)₅ (L=L¹或L³),LW(CO)₄ (L=L¹,L²或L³)和LW(CO)₃ (L=L¹或L²).核磁,红外及X-射线单晶衍射分析表明这3种配体表现出了可变的配位方式.在LW(CO)₅中,当配体为L¹时,其倾向于通过咪唑氮与金属配位,而为L³则倾向于利用吡啶氮与金属作用;在LW(CO)₄中,配体L¹表现为通过咪唑氮和吡唑氮原子配位的[N,N']双齿配体,而L²和L³表现为通过吡唑氮原子配位的[N,N]双齿配体;在LW(CO)₃中,L¹和L²起着[N,N,N']三齿螯合配体的作用.     

离子液体辅助水热法合成六方WO3纳米棒束

提出了利用简单的离子液体1-甲基-3-乙基-咪唑溴辅助水热法合成六方WO₃纳米棒束的方法,对其结构进行了表征,并讨论其形成机理。TEM照片表明：WO₃纳米棒束由长200~300 nm、直径25~30 nm的纳米棒组装而成。离子液体1-甲基-3-乙基-咪唑溴在纳米棒的形成过程中起到了结构导向剂的作用。     

Reaction with SO3 in Ionic Liquids: The Example of K2(S2O7)­(H2SO4)

The ionic liquid 1‐butyl‐3‐methylimidazolium hydrogensulfate, [bmim]HSO₄, turned out to be resistant even to strong oxidizers like SO₃. Thus, it should be a suitable solvent for the preparation of polysulfates at low temperatures. As a proof of principle we here present the synthesis and crystal structure of K₂(S₂O₇)(H₂SO₄), which has been obtained from the reaction of K₂SO₄ and SO₃ in [bmim]HSO₄. In the crystal structure of K₂(S₂O₇)(H₂SO₄) (orthorhombic, Pbca, Z = 8, a = 810.64(2) pm, b = 1047.90(2) pm, c = 2328.86(6) pm, V = 1978.30(8) ų) two crystallographically unique potassium cations are coordinated by a different number of monodentate and bidentate‐chelating disulfate anions as well as by sulfuric acid molecules. The crystal structure consists of alternating layers of [K₂(S₂O₇)] slabs and H₂SO₄ molecules. Hydrogen bonds between hydrogen atoms of sulfuric acid molecules and oxygen atoms of the neighboring disulfate anions are observed.     

The electrochemical evaluation of antipsychotic drug (promethazine) in biological and environmental samples through samarium cobalt oxide nanoparticles

In this work, we developed a perovskite structured samarium cobalt oxide nanoparticles (SmCoO₃ NPs) with the aid of the co-precipitation method. The rare earth metal (Sm) and cobalt oxide combined to form a perovskite lattice structure. One-pot route synthesized SmCoO₃ NPs were scrutinized successfully through various physicochemical techniques. Concerning its effective thermal stability and electrical properties, the synthesized SmCoO₃ NPs have been effectively implemented in the electrochemical evaluation of promethazine hydrochloride (PHY) using cyclic voltammetry. The electrochemical detection of PHY was performed through SmCoO₃ NPs-modified glassy carbon electrode (GCE) and unmodified GCE. The electron transfer kinetics, effect of scan rate, the influence of pH, electroactive surface area, selectivity, and sensitivity have been studied. The electron charge transfer rate (R_ct) and electrolyte resistance (R_s) were calculated to be 105.59 (Ω) and 150 (Ω) in the ferricyanide probe, indicating great facilitation of the electron transfer between PHY and SmCoO₃ NPs deposited on the electrode surface. Further, the optimized SmCoO₃-modified GCE exemplifies excellent selectivity, storage stability, reproducibility, repeatability, detection limit (5 nM), sensitivity (0.594 μA μM^?1 cm^?2), and wide consecutive linear ranges, respectively. Besides, the proposed method has been effectively employed for the detection of PHY in the various real samples which reveals good recoveries of 95.40–99.17%.     

Binary Metal Oxide Adsorbed Graphene Modified Glassy Carbon Electrode for Detection of Riboflavin

Tungsten oxide (W) decorated titanium oxide (T) adsorbed onto a graphene (Gr) and modified the glassy carbon electrode for the electrochemical quantification of riboflavin (RF) in edible food and pharmaceuticals. For comparison, nanocomposites are formed using graphene oxide (GO), reduced graphene oxide (rGO) and pure graphite (G) sheets to study the electrochemical activities towards riboflavin. The ternary WTGr modified GCE shows the highest electrocatalytic activity due to synergetic interactions between the metal oxide and graphene. The electrochemical observations are supported by the SEM, HRTEM, XRD, UV-Vis, Zeta potential (ζ) and size data. The sensor shows a wide linear range 20 nM–2.5 μM with a detection limit 25.24 nM and sensitivity (4.249×10⁻⁸ A/nM). The fabricated sensor is validated in real samples.     

Experimental and four‐component relativistic DFT studies of tungsten carbonyl complexes

We present a theoretical and experimental study of the structure and nuclear magnetic resonance (NMR) parameters of the pentacarbonyltungsten complexes of η¹‐2‐(trimethylstannyl)‐4,5‐dimethylphosphinine, η²‐norbornene, and imidazolidine‐2‐thione. The three complexes have a pseudo‐octahedral molecular structure with the six ligands bonded to the tungsten atom. The η¹‐2‐(trimethylstannyl)‐4,5‐dimethylphosphinine‐pentacarbonyl tungsten complex was synthesized for the first time. For all compounds, we present four‐component relativistic calculations of the NMR parameters at the Dirac–Kohn–Sham density functional level of theory using hybrid functionals. These large‐scale relativistic calculations of NMR chemical shifts and spin–spin coupling constants were compared with available experimental data, either taken from the literature or measured in this work. The inclusion of solvent effects modeled using a conductor‐like screening model was found to improve agreement between the calculated and experimental NMR parameters, and our best estimates for the NMR parameters are generally in good agreement with available experimental results. The present work demonstrates that four‐component relativistic theory has reached a level of maturity that makes it a convenient and accurate tool for modeling and understanding chemical shifts and indirect spin–spin coupling constants of organometallic compounds containing heavy elements, for which conventional non‐relativistic theory breaks down. Copyright © 2015 John Wiley & Sons, Ltd.     

Gold Carbenoids: Lessons Learnt from a Transmetalation Approach

Carbophilic catalysts that are based on Au^I allow a host of different nucleophiles to be added across various π systems. 1 – 3 Although many of these reactions are thought to proceed via gold carbenoids, the challenge to observe and characterize these putative intermediates has basically been unmet. 4 The current mechanistic interpretation therefore largely relies on indirect evidence and computational data, some of which are subject to debate. 5 In an attempt to fill this gap, we pursued a potential route to gold carbenoids by formal transmetalation of chromium or tungsten Fischer carbene complexes with [LAu]⁺. Whereas this transformation proceeds with exceptional ease as long as a stabilizing heteroelement is present on the carbene center, it stops half‐way in its absence. Rather unusual bimetallic arrays are formed, which allow the charge density to delocalize over several positions. The obvious difficulty of releasing an “unstabilized” gold carbenoid has potential mechanistic implications for the understanding of π‐acid catalysis in general.