肝素化壳聚糖季铵盐／壳聚糖复合膜抗凝血性能的研究

以壳聚糖季铵盐，壳聚糖为基本原材料，选用戊二醛为交剂剂及固定剂，制备一种物理机械性能较优的抗凝血材料。探讨了戊二醛及肝素钠两者用量对肝素化程度及血液生的影响。     

2-羟丙基三甲基氯化铵壳聚糖的制备及其性能研究

以脱乙酰度为95.37%的壳聚糖(CTS)为原料,异丙醇为溶剂,2,3-环氧丙基三甲基氯化铵为改性剂,于80℃反应12 h合成了水溶性季铵盐2-羟丙基三甲基氯化铵壳聚糖(HACC)。HACC的吸水保水性是CTS的2倍～3倍,加入化妆品中培养2周后菌落总数少于100 CFU.g-1。     

State of Molecules and Ions in the Structural Channels of Synthetic Beryl with an Ammonium Impurity

The contents of the structural channels of beryl, grown hydrothermally from an ammonium-containing solution, were investigated by IR and EPR spectroscopy. Using IR spectroscopy we found that water molecules, ammonium ions, and a small number of HCl molecules enter the structural channels of beryl in the course of mineral growth. In these beryls, the ammonium ions play the role of alkali cations. The ammonium ions are as rigidly fixed in the lattice as are water molecules; they are eliminated by calcination at high temperatures close to the decomposition temperature. On exposure to radiation at 77 K, the paramagnetic NH ₃ ⁺ and H⁰ radicals are stabilized in the structural channels of beryl. In addition to the known H⁰ radical, other states of atomic hydrogen, interacting with medium protons, are observed as well. For one of the additional radicals, H_b, we suggest the model of atomic hydrogen stabilized at the center of a silicon-oxygen ring with two water molecules in adjacent cavities.     

无机添加剂对硝酸铵拒爆性的影响研究

考察了无机添加剂对农用硝酸铵拒爆性的影响。结果表明，当硝酸铵中添加3%的无机改性剂GXJ 1和10%的无机改性剂GXJ 2后，其拒爆性能明显增强；改性后的硝酸铵按照工业炸药配方配制成铵油炸药，不能被8号雷管起爆。而且改性后的硝酸铵颗粒强度高，不易粉化、结块和吸潮，具有优良的肥料品质。经济效益分析也表明，改性硝酸铵具有广阔的市场应用前景。通过X射线衍射分析、扫描电子显微镜分析等对改性硝酸铵进行了表征，并对拒爆机理进行了初步探讨。     

二烯丙基二甲基氯化铵—丙烯酰胺反相乳液聚合的动力学特征研究

采用油酸失水山梨醇酯（ＳＰＡＮ）－壬基酚聚氧化乙烯醚（ＯＰ）复合乳化剂与Ｋ２Ｓ２Ｏ８－Ｎａ２ＳＯ３氧化还原引发剂，进行二烯丙基二甲基氯化铵－丙烯酰胺反相乳液共聚合，测得单体的竞聚率为γＤＡＤＭＡＣ＝０．１４±０．１１，γＡＭ＝５．０５±０．６６；在单体浓度为２５─４５％，引发剂浓度０．０６—０．１％，乳化剂浓度为５—９％，聚合温度３０３Ｋ条件下，得到了共聚反应动力学方程：Ｒｐ＝ｋ［Ｍ］０．６８［Ｉ］１．３１［Ｅ］０．７３，文中对上述结果做了解释．     

气相法分析3-氯-2-羟丙基三甲基氯化铵中的微量有机杂质

 以氯仿为萃取剂 ,对 3 氯 2 羟丙基三甲基氯化铵 (CHPTMA)水溶液进行萃取 ,用气相法分析了CHPT MA溶液中的微量有机杂质环氧氯丙烷和 1 3 二氯丙醇。柱为 2m× 3mmi d 的不锈钢填充柱 ,固定相为10 %的PEG 2 0M ,载体为ChromosorbW/AW。环氧氯丙烷和 1,3 二氯丙醇的回收率分别为 97 5 %～ 10 5 0 %和93 3%～ 98 8% ,相对标准偏差分别为 11 5 %和 13 1% ,最低检测限分别为 5 0 μg/g和 10 0 μg/ g。     

Determination of diethanolamine or <Emphasis Type="Italic">N</Emphasis>-methyldiethanolamine in high ammonium concentration matrices by capillary electrophoresis with indirect UV detection: application to the analysis of refinery process waters

Alkanolamines such as diethanolamine (DEA) and N-methyldiethanolamine (MDEA) are used in desulfurization processes in crude oil refineries. These compounds may be found in process waters following an accidental contamination. The analysis of alkanolamines in refinery process waters is very difficult due to the high ammonium concentration of the samples. This paper describes a method for the determination of DEA in high ammonium concentration refinery process waters by using capillary electrophoresis (CE) with indirect UV detection. The same method can be used for the determination of MDEA. Best results were achieved with a background electrolyte (BGE) comprising 10 mM histidine adjusted to pH 5.0 with acetic acid. The development of this electrolyte and the analytical performances are discussed. The quantification was performed by using internal standardization, by which triethanolamine (TEA) was used as internal standard. A matrix effect due to the high ammonium content has been highlighted and standard addition was therefore used. The developed method was characterized in terms of repeatability of migration times and corrected peak areas, linearity, and accuracy. Limits of detection (LODs) and quantification (LOQs) obtained were 0.2 and 0.7 ppm, respectively. The CE method was applied to the determination of DEA or MDEA in refinery process waters spiked with known amounts of analytes and it gave excellent results, since uncertainties obtained were 8 and 5%, respectively.     

Zur Struktur und Reaktivität des Diammoniumhexafluoromanganats(IV)

About the Structure and Reactivity of Diammonium Hexafluoromanganate(IV) Electrolytic oxidation of an aqueous suspension of MnF₂ containing NH₄F, and subsequent crystallization in 40% HF yields yellow crystals of (NH₄)₂MnF₆. It crystallizes in the hexagonal K₂MnF₆ type structure with the space group P6₃mc and a = 5.903; c = 9.565 Å; Z = 2. With in situ powder diffraction studies it is shown, that (NH₄)₂MnF₆ is gradually reduced in a NH₃ atmosphere between 30 and 230 °C to afford (NH₄)₃MnF₆, (NH₄)₂MnF₅, and finally NH₄MnF₃. (NH₄)₃MnF₆, thereby, forms a hitherto unknown cubic (a = 9.082 Å) high temperature modification with the cryolite type structure. Under N₂ the thermal decomposition of (NH₄)₂MnF₆ proceeds via NH₄MnF₄ to yield MnF₂.     

二钼酸铵晶体饱和水溶液Raman光谱的变异现象及其机理

记录了常温下二钼酸铵晶体饱和水溶液的Raman光谱，并分别与二钼酸铵晶体、仲钼酸铵晶体、仲钼酸铵晶体饱和水溶液、水溶液状态下单钼酸根离子的Raman光谱进行了比较研究。结果表明：二钼酸铵晶体饱和水溶液Raman光谱相对二钼酸铵晶体Raman光谱，明显地发生了变异现象。二钼酸铵晶体饱和水溶液Raman光谱其主要特征峰最高振动频率937.6 cm^-1与仲钼酸铵晶体饱和水溶液Raman光谱主要特征峰最高振动频率937.6 cm^-1完全吻合，而其次高振动频率893.9 cm^-1，恰好介于水溶液中单钼酸根离子Raman光谱主要特征峰最高振动频率895.1 cm^-1与仲钼酸铵晶体饱和水溶液Raman光谱主要特征次高峰振动频率891.0 cm^-1之间，而且三者彼此接近。二钼酸铵晶体饱和水溶液Raman光谱主、次特征峰强度之比值为2.1，与仲钼酸铵晶体饱和水溶液Raman光谱主、次特征峰强度之比值4.4相比，一半不足。提出了一种利用Raman光谱主要特征峰振动频率及其主、次特征峰强度之比值对二钼酸铵晶体饱和水溶液组分同时进行定性和半定量分析的新方法。发现了常温下二钼酸铵晶体饱和水溶液中二钼酸根离子Mo₂O₇^2-已经不复存在，完全转变成了优势组分仲钼酸根离子Mo₇O₂₄^6-和次要组分单钼酸根离子MoO₄^2-；证明了常温下含钼水溶液酸化过程中溶液Raman光谱离散性变化现象的存在。运用结构化学和物理化学原理同时讨论了二钼酸铵晶体饱和水溶液Raman光谱发生变异现象的机理。     

以短链季铵盐/脂肪酸盐为模板合成超微孔二氧化硅

超微孔材料具有1~2 nm的孔径,在分离、催化应用中有望展现出择形催化的能力。 寻找经济、简便的合成超微孔材料的表面活性剂体系是一项有意义的工作。 本研究以短链季铵盐(十烷基三甲基溴化铵,记为C₁₀TAB)和不同链长脂肪酸酸盐混合胶束为模板剂,硅酸钠为硅源,成功制备出高度有序超微孔SiO₂。 通过小角X射线衍射、N₂吸附-脱附、傅里叶变换红外光谱、扫描电子显微镜(SEM)和透射电子显微镜(TEM)等技术手段对产品的结构和性能进行了表征。 结果表明,合成体系中脂肪酸盐碳链长、加入量、晶化温度等对产物孔道有序性有很大影响。 当选择正辛酸钠(SO)为助表面活性剂,当n(C₁₀TAB):n(Na₂SiO₃):n(SO):n(H₂O)=1:1.5:0.3:800,晶化温度为80 ℃时,可以得到高度有序超微孔SiO₂。 煅烧后样品比表面积为1300 m²/g,孔体积0.49 cm³/g,孔径分布在1.90 nm。