Contracted polarization functions for B to Ar

Using optimal exponents for B through Ne given by Dunning and those for Al through Ar by Woon and Dunning, d-type contracted polarization functions (2d/1d), (3d/1d), and (3d/2d) are generated from natural orbitals of atomic single and double excitation configuration interaction (SDCI) calculations, where the numbers before and after the slash are those of the primitive and contracted Gaussian type functions. The resulting contracted functions are tested on N₂ and P₂ molecules by self-consistent field and SDCI calculations, which clarify characteristics of the present polarization functions. Received: 5 June 1997 / Accepted: 20 August 1997     

Copolymerization of butadiene and styrene with a gadolinium tricarboxylate catalyst

Homo- and copolymerizations of butadiene (BD) and styrene (St) were carried out by gadolinium catalysts having various tricarboxylate ligands [Gd(OCOR)₃: R = CH₃, CH₂Cl, CHCl₂, CCl₃, and CF₃], to investigate the effects of ligands and discuss the cis polymerization mechanism. Polymerization of BD with Gd(OCOR)₃—(i—Bu)₃Al—Et₂AlCl catalysts was carried out in hexane at 50°C. By each catalyst, poly(BD) having a high cis content (cis = 97–99%) in 22–85% yields for 2–24 h were obtained. The ligands with low pKa values increased the polymerization activity as follows: R of Gd(OCOR)₃: CF₃ > CCl₃ > CHCl₂ > CH₂Cl ～ CH₃. On the other hand, in the polymerization of St or copolymerization of BD and St under similar conditions, the highest activity was attained by a Gd(OCOCCI₃)₃- based catalyst. The difference in the optimum ligand among the homo- and copolymerization of BD and St was discussed on the basis of energy levels of the catalysts. In the copolymers of BD and St, the cis-1,4 content of the BD unit decreased with increasing St content. Furthermore, according to the diad analysis of copolymers (St content ～ 14.5 mol %) by ¹³C NMR spectroscopy, the low cis value of the BD unit was observed in the St-BD diad (cis/trans/vinyl = 24/53/23), while the high cis value of the BD unit remained in the BD-BD diad (cis/trans/vinyl = 89/10/1). These results suggest that the terminal BD unit is controlled by the cis configuration by the coordination between the penultimate cis vinylene unit and the gadolinium metal catalyst, whereas the presence of the penultimate St unit interferes with cis polymerization of the terminal BD unit. The difference in the coordination mechanism in the course of polymerization between rare earth metal and transition metal catalysts such as the Ni(acac)₂ and Co(acac)₃-based catalyst was also discussed. © 1995 John Wiley & Sons, Inc.     

DSB显著提高羧酸盐驱油体系抗钙镁离子能力的研究

测定了工业品级的天然混合长链烷基羧酸盐(SDC)以及与3-(N,N-二甲基十二烷基胺)-2-羟基-丙磺酸(DSB)复配驱油体系的界面张力(ITFmin), 分别得出其抗钙镁离子的能力为400和5000 mg/L. 选择试剂级十二烷基羧酸钠与DSB复配, 测定了不同配比溶液的表面张力值和临界胶束浓度cmc, 结合长链烷基脂肪酸与钙离子的溶度积Ksp, 分析了对不溶性长链烷基羧酸盐形成的影响. 根据现场驱油体系配方, 计算了两者在溶液中的摩尔配比为4:1时的十二烷基羧酸盐在胶束中的摩尔分数xm1为0.51, 相互作用参数βm值为-3.11, 反映了两者有较强的相互作用. 采用量子化学方法, 对由1个十二烷基羧酸分子、1个DSB分子及1个二价钙离子组成的模型复合物进行了能量计算和电荷分布计算, 得出在长链烷基羧酸盐和DSB两者混合胶束的界面层中存在负电荷空穴, 提出二价金属离子被络合的模型, 合理地解释了实验事实.     

Oxidative cyclization of 2-pyrrolidinyl-acetamide and 2-pyrrolidinyl-propionamide local anaesthetics

2 - Pyrrolidinyl - acetamide and -propionamide local anaesthetics (1a–d) on oxidation with mercuric acetate, potassium hexacyanoferrate(III) and potassium permanganate underwent oxidative cyclization to give new bicyclic compounds, hexahydro - 1H - pyrrolo[1,2 - a]imidazolin - 2 - ones (2a–d). The propionamides (1c–d) yielded mixtures of the two possible diastereoisomers of 2c and 2d. These were separated; in solution and above their melting points they epimerized via ring opening and reclosure between the 7a-carbon and 1-nitrogen atoms.     

Chemical modification of polymer surfaces: a review

The main approaches that have been taken to chemically modify polymer surfaces are introduced and reviewed. These are wet chemical oxidation, plasma treatment, classical organic chemistry, and attachment of polymer chains. The extent to which each of these approaches can produce the specific modifications desired is discussed, and any unwanted effects that commonly occur are cited. Finally, the need for using several methods of surface analysis in concert to obtain adequate surface characterization is described.     

Determination and Differentiation of Two Seemingly Identical Medicinal Herbs by Capillary Electrophoresis with Electrochemical Detection

A high-performance capillary electrophoresis with electrochemical detection (CE-ED) method has been employed for the determination of six bioactive ingredients in traditional Chinese herbs, Herba cepbalanoplosis segeti and Herba cirsii japonici. The effects of several factors such as the acidity and concentration of running buffer, the separation voltage, the applied potential and the injection time on CE-ED were investigated. Under the optimum conditions, the six analytes could be well separated within 21 min in a 75 cm length capillary at the separation voltage of 15 kV in a 50 mmol L^–1 borax running buffer (pH 8.4). A 300 m diameter carbon disk electrode was used as the working electrode positioned carefully opposite the outlet of the capillary in a wall-jet configuration at potential of +950 mV (vs. SCE). Good linear relationship was established between peak current and concentration of analytes over two orders of magnitude with detection limits (S/N=3) ranged from 1.5×10^–7 to 6.0×10^–7 g mL^–1 for all six analytes. This proposed method has been successfully applied for the analysis of traditional Chinese herbs after a relatively simple extraction procedure, further on, for the differentiation of these above two seemingly identical herbs based on their electropherograms or characteristic electrochemical profiles.     

Synthesis, structure, and electrochemical properties of 12,42-dioxo-21,31-diphenyl-7,10,13-trioxa-1,4(3,1)-diquinoxalina-2(2,3),3(3,2)-diindolizinacyclopentadecaphane

The oxidative dehydrocyclization of the 3-(indolizin-2′-yl)-2-oxoquinoxaline monopodand performed either electrochemically or under the action of molecular iodine affords new redox-active heterocyclophane consisting of the redox-switchable biindolizine fragment combined with the polyether-bridged π-deficient quinoxaline systems. The single-crystal X-ray diffraction study showed that the trioxaundecane chain of heterocyclophane adopts an extended conformation, and one of the phenyl substituents of the molecule closes the pseudocavity formed by the spacer from one of the sides. The cyclic voltammetric study of heterocyclophane in MeCN and DMF showed the three-step oxidation of the indolizine fragments accompanied by the single-electron transfer in each step. The first and third steps are reversible, and the second step is irreversible. The oxidation at potentials of the first peak gives rise to stable radical cations detected by the ESR method (g = 2.0024, a _2N = 0.26 mT). Dedicated to Professor E. A. Berdnikov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1991–2003, October, 2007.     

TRITERPENE GLYCOSIDES FROM Tetrapanax papyriferum. III. MINOR MONODESMOSIDE GLYCOSIDES FROM STEM BARK

Minor monodesmoside triterpene glycosides St-A, St-B, St-C ₁ , St-D ₁ , St-C ₂ , and St-D ₂ were isolated from stem bark ofTetrapanax papyriferumC. Koch (Araliaceae). The structures of oleanolic and echinocystic acid 3-O--L-arabinopyranosides, oleanolic and echinocystic acid 3-O--D-glucopyranosyl-(13)-O--L-arabinopyranosides, and oleanolic and echinocystic acid 3-O--D-galactopyranosyl-(12)-O--L-arabinopyranosides, respectively, were proposed. Glycosides St-C ₂ , St-D ₁ , and St-D ₂ are new triterpene glycosides. The structures of the isolated compounds were established using chemical methods and NMR spectroscopy.     

Voltammetric Behavior of Arsenic(III) in the Presence of Sodium Diethyl Dithiocarbamate and Its Determination in Water and Highly Saline Samples by Adsorptive Stripping Voltammetry

This paper describes the voltammetric behavior of As(III) at the hanging mercury drop electrode (HMDE) in the presence of sodium diethyl dithiocarbamate (SDDC) and a new voltammetric method for the determination of As(III) at trace levels. The method is based on the adsorptive deposition of a As(III) complex with SDDC at ?0.45 V (vs. Ag/AgCl) on the HMDE in acidic medium of 0.01 mol L^?1 HCl (pH 2.0) and its cathodic stripping during the potential scan (100 mV s^?1). The linear range for the determination of As(III) in the presence of SDDC (4 μmol L^?1) in water samples was between 1 and 10 μg L^?1 for a deposition time of 300 s (r=0.994) and between 10 and 100 μg L^?1 for a deposition time of 60 s (r=0.999). For the determination of As(III) in dialysis concentrate samples, the linear range was between 5 and 25 μg L^?1 for a deposition time of 180 s (r=0.992) and between 10 and 100 μg L^?1 for a deposition time of 60 s (r=0.996). Detection limits of 0.3 and 2.2 μg L^?1 in water and dialysis concentrate samples were calculated for the method using a deposition time of 300 and 180 s, respectively. Recovery values between 93.0 and 110.0% for As(III) added to deionized, mineral, seawater (synthetic and real) and dialysis concentrate samples prove the satisfactory accuracy and applicability of the procedure.     

Evaluation of digestion procedures for the determination of iron and zinc in biscuits by flame atomic absorption spectrometry

An evaluation is made of different digestion methods for the determination of iron and zinc in biscuits prior to flame atomic absorption analysis. For the initial studies, microwave digestion was enough (using hydrogen chloride and nitric acid 3:1, v/v, at 180 °C and 600 W) to provide comparable accuracy, precision, digestion time and non-critical handling of reagents to dry-ashing and wet digestion (using different acid mixtures) and also to a simple acid treatment at room temperature. Although, after a simple microwave digestion, the spiked recoveries were found around 96–102%, to reduce the digestion time and for simplicity we worked on wet acid treatments. The results showed that acid-only treatment is not enough to digest the samples without adding ethanol, which was found necessary to digest organic residue at room temperature. The method was validated by comparison of the data found for commercial biscuit samples through using the proposed procedure and the AOAC official reference spectrophotometric method. Fe concentration in the different biscuits (such as petit beurre, baby biscuits, etc.) ranged from 1.21 to 15.96 mg/100 g while Zn concentration ranged from 0.58 to 2.50 mg/100 g depending on biscuit type. The highest concentration of Fe was in baby biscuits and these biscuits were about thirteen times richer in Fe than petit beurre biscuits.