A design of experiments concept for the minimization of nonspecific peptide adsorption in the mass spectrometric determination of substance P and related hemokinin‐1

Substance P and hemokinin‐1 were predominantly examined by immunoassays with their limitation to differentiate appropriately between both peptides. The use of liquid chromatography coupled with tandem mass spectrometry is a promising, highly selective alternative. Adsorption processes have been identified in preliminary experiments to play a crucial role in the loss of mass spectrometry intensity of both peptides. Therefore, a design of experiments concept was created to minimize nonspecific peptide adsorption. For this purpose, the most critical influencing parameters—(1) the composition of the injection solvent as well as (2) the most suitable container material—were systematically and concordantly investigated. The addition of modifiers, such as formic acid, dimethyl sulfoxide, and organic solvents, to the injection solvent led to a substantial gain of intensity of substance P and hemokinin‐1 compared to the start gradient as an injection solvent. Furthermore, the systematic investigation underlined the high impact of the container material, demonstrating polypropylene as the most favorable material. A conjoint injection solvent optimum was found to determine both peptides simultaneously by the conduction of a sweet‐spot analysis. The experimental design substantially reduced nonspecific peptide adsorption and enabled the simultaneous and selective determination of endogenous substance P and hemokinin‐1 plasma levels.     

Improved Interfacial Bonding Strength and Reliability of Functionalized Graphene Oxide for Cement Reinforcement Applications

Poor bonding strength between nanomaterials and cement composites inevitably lead to the failure of reinforcement. Herein, a novel functionalization method for the fabrication of functionalized graphene oxide (FGO), which is capable of forming highly reliable covalent bonds with cement hydration products, and therefore, suitable for use as an efficient reinforcing agent for cement composites, is discussed. The bonding strength between cement and aggregates was improved more than 21 times with the reinforcement of FGO. The fabricated FGO also demonstrated many important features, including high reliability in cement pastes, good dispersibility, and efficient structural refinement of cement hydration products. With the incorporation of FGO, cement mortar samples demonstrated up to 40 % increased early and ultimate strength. Such results make the fast demolding and manufacture of light constructions become highly possible, and show strong advantages on improving productivity, saving cost, and reducing CO₂ emissions in practical applications.     

Maltodextrin as stabilizer for emulsion polymerization: Adsorption and grafting behavior

Emulsion polymerization of the three-monomer system butyl acrylate–styrene–methacrylic acid was performed in batch using a commercial maltodextrin derived from starch degradation as stabilizer. Stable latexes with narrow particle size distributions were obtained in all examined cases. A method was developed to analyze and quantify the partitioning of the maltodextrin between the continuous phase (supernatant) and the particle phase. Significant differences between the polysaccharides adsorbed onto particles with or without emulsion polymerization reaction were observed. The possible reactions of maltodextrin in presence of a radical initiator were studied in aqueous phase, thus confirming maltodextrin degradation. The formation of copolymers involving the original monomers and the stabilizer according to two different reactive pathways was also confirmed. In terms of adsorbed maltodextrin, two different contributions were observed: maltodextrin physically adsorbed and maltodextrin chemically grafted and/or physically incorporated into the polymer.     

Microstructural evolution of AZ31 magnesium alloy subjected to sliding friction treatment

Microstructural evolution and grain refinement mechanism in AZ31 magnesium alloy subjected to sliding friction treatment were investigated by means of transmission electron microscopy. The process of grain refinement was found to involve the following stages: (I) coarse grains were divided into fine twin plates through mechanical twinning; then the twin plates were transformed to lamellae with the accumulation of residual dislocations at the twin boundaries; (II) the lamellae were separated into subgrains with increasing grain boundary misorientation and evolution of high angle boundaries into random boundaries by continuous dynamic recrystallisation (cDRX); (III) the formation of nanograins. The mechanisms for the final stage, the formation of nanograins, can be classified into three types: (i) cDRX; (ii) discontinuous dynamic recrystallisation (dDRX); (iii) a combined mechanism of prior shear-band and subsequent dDRX. Stored strain energy plays an important role in determining deformation mechanisms during plastic deformation.     

The preparation and adsorption properties of electrospun aramid nanofibers

The focus of this work is the preparation of aramid nanofibers via electrospinning technology and the study of their adsorption properties. In this article, aramid nanofibers were prepared by electrospinning aramid fibers solution with the addition of lithium chloride (LiCl). It showed a good adsorption capacity when methylene blue (MB) was used as the model target. There were much larger adsorption amounts and faster kinetics of uptaking target species of electrospun aramid nanofibers to MB than that of electrospun polyethersulfone (PES) nanofibers. Compared with activated carbon, aramid nanofibers also have a much faster adsorption rate to MB. Aramid nanofibers were subsequently used to effectively remove endocrine disruptors such as bisphenol A (BPA), phenol (Phe), and p‐hydroquinone (BPhe) from their aqueous solutions. Additionally, molecule imprinted technology enhances aramid nanofibers with much higher adsorption amounts and special adsorption property for endocrine disruptors. These results showed that aramid nanofibers have the potential to be used in environmental applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Electric field assisted oxygen removal from the basal plane of the graphitic material

We provide a novel strategy to eliminate the epoxy group from the basal plane of graphene platelets. Given that the current reduction methods are unsatisfactory to clean the epoxides or sometimes cause undesirable structure deformations, the proposed strategy restores the original hexagonal carbon network without creating other new defects. To the best of our knowledge, the electric field mediated graphene oxide (GO) reduction has not yet been systematically investigated. The capability would permit the improvement of existing GO reduction methods and assist in the fabrication of high‐quality graphitic materials. © 2012 Wiley Periodicals, Inc.     

C_(2~6)烯烃在H-ZSM-5分子筛周期性模型上吸附的理论研究

采用密度泛函理论中的PBE-D方法研究了C2~6直链烯烃以及丁烯异构体在H-ZSM-5分子筛周期性模型上的吸附行为。结果表明,对于C2~6直链烯烃,随着碳数的增加,烯烃的吸附能以-12 kJ/mol的常数线性增大,体系中色散校正能ED以-13 kJ/mol的常数线性增大,而不考虑范德华力的能量E*随碳数增加变化不大,只在C5和C6时由于空间阻力凸显而减小。ED显著大于E*,说明烯烃在分子筛孔道中吸附时范德华力起主要作用,且碳数增加其影响增大。丁烯异构体吸附能大小顺序为:反式-2-丁烯顺式-2-丁烯正丁烯异丁烯。正丁烯的3种异构体ED相近且都比正丁烯的大,3种异构体的吸附能差异由E*不同引起。差分电荷密度分析表明,烯烃双键与酸性中心之间有电子聚集,且聚集程度与π配位作用相一致,而且酸性中心H原子有质子化趋向,O原子及其周围电子增加。     

No optimal 1‐planar graph triangulates any nonorientable closed surface

Suzuki [Discrete Math. 310 (2010), 6–11] proved that for any orientable closed surface F² other than the sphere, there exists an optimal 1‐planar graph which can be embedded on F² as a triangulation. However, for nonorientable closed surfaces, the existence of such graphs is unknown. In this article, we prove that no optimal 1‐planar graph triangulates a nonorientable closed surface.     

Vesicle formation in aqueous mixture of the cetyltrimetylammonium bromide and an anionic chitosan derivative

The present work aimed at research the physic-chemical properties of the interaction of N-decyl-O-chitosan sulfate (an amphiphilic chitosan derivative, C₁₀-OCHS) with cetyltrimetylammonium bromide (CTAB) by the steady-state fluorescent, static/dynamic surface tension, turbidity and transmission electron microscopy (TEM). The results showed that the complex of C₁₀-OCHS/CTAB had high surface activity and lower critical aggregation concentration. Besides, the C₁₀-OCHS/CTAB could self-assemble into various aggregates like irregular spherical aggregates, vesicles or polydisperse aggregates from lower to higher concentrations of CTAB with a mixed C₁₀-OCHS concentration of 200?mg/L.