Evanescent fluorobiosensor for the detection of polyaromatic hydrocarbon based on DNA intercalation

A flow-injection analysis (FIA) system coupled with an evanescent wave (EW) Biosensor employing total internal reflection of fluorescence radiation (TIRF) for the detection of polyaromatic hydrocarbon that intercalates into DNA is reported. A highly fluorescent intercalator, “ethidium bromide,” has been used as the reference compound for detection. The EW Biosensor was developed according to the procedure described earlier (1,2). Data on the analysis of Naphthalene, 3-methy cholanthrene, 7,12-dimethylbenz(a)anthracene, 1,2-benzanthracene, and some standard reference materials supplied by the National Institute of Standards and Technology are reported. The relative ability of the polyaromatic hydrocarbon to displace ethidium bromide, based on the relative binding ratio, is found to be on the order of 7,12-dimethylbenz[a]anthracene > 3-methylcholanthrene > 1,2-benzanthracene > napthalene.     

络合吸附体系吸附性的研究

本文论述了研究络合吸附体系吸附性的重要意义,较详细地讨论了各种方法,包括微分电容曲线法、交流极谱法和计时电量法等在吸附性研究和吸附量测定中的应用。     

Fields as Kolmogzrov flows

It is widely recognized that for highly unstable dynamical systems there exists a fundamental limitation on predictability and determinism. An important class of such highly unstable systems is the class of K-flow, which is further characterized by the existence of time-asymmetric objects in the form of K-partition. Our recent approach to the problem of irreversibility has shown that when the implications of the limitation on determinism arising from strong form of instability and those of the existence of K-partition are consistently taken into account, one is naturally led from the physically unrealizable deterministic evolution of phase points to an entropy-increasing stochastic Markovian evolution. Furthermore, this transition is not the result of extraneously imposed coarse graining and/or approximation schemes, but can be brought about by an invertible transformation whose existence and construction are determined by the nature of the instability of the dynamical system itself. After a brief review of this theory which also contains some relatively new remarks, we prove that classical Klein-Gordon field (both massive and massless) possess the structure of K-flow. This seems to provide the first examples of relativistic systems that are K-flows. Some of the implications of this result are briefly discussed. From a mathematical point of view, this seems to be a first step toward an ergodic theory of partial differential equations. In the process, we also provide an independant group-theoretic proof of the existence of incoming and outgoing subspaces of the scattering theory of Lax and Phillips for the wave equation.     

Investigation of the thermophysical properties of polymers by the temperature wave technique

The technique of temperature waves to measure the complex thermophysical characteristics of materials has been proposed. The relations for the moduli and arguments of these characteristics for the case of plane temperature waves have been calculated. The temperature dependences of the moduli and arguments of complex thermophysical characteristics of polyvinylacetate (PVAc) at different frequencies and also the temperature dependences of its vibrational and configurational heat capacities have been determined. It has been shown that the vibrational heat capacity of PVAc in the region of softening grows sharply and its configurational heat capacity goes through a peak. The segmental mobility has been found to affect the heat transfer in the polymer in an ambivalent way causing both a decrease and increase of thermal conductivity.

---

Zusammenfassung Zur Bestimmung der komplexen thermophysischen Eigenschaften von Stoffen wurde eine Temperaturwellentechnik vorgeschlagen. Für den Fall zweidimensionaler Temperatur-wellen wurden die Verhältnisse von Moduli und Argumenten dieser Eigenschaften berechnet. Die Temperaturabhängigkeit von Moduli und Argumenten der komplexen thermophysischen Eigen-schaften von Polyvinylacetat (PVAc) bei verschiedenen Frequenzen und auch die Temperatur-abhängigkeit seiner Vibrations- und Konfigurations-Wärmekapazitäten wurden bestimmt. Es wurde gezeigt, daß die Vibrations-Wärmekapazität von PVAc im Erweichungsbereich scharf zunimmt und die Konfigurations-Wärmekapazität durch einen Peak geht. Man fand, daß die Segment-Mobilität den Wärmetransport im Polymer auf eine ambivalente Weise beeinflußt, in dem die Wärmeleit-fähigkeit entweder gesenkt oder angehoben wird.

     

锰（Ⅱ）—邻菲口罗啉配合物极谱吸附波及其应用

在ｐＨ９．５ＮＨ３ＮＨ４Ｃｌ缓冲溶液中，Ｍｎ（Ⅱ）与邻菲口罗啉形成的配合物在－１．３６Ｖ（ｖｓ．ＳＣＥ）处产生一灵敏的吸附波，一阶导数峰电流与Ｍｎ（Ⅱ）浓度在５×１０－８５×１０－６ｍｏｌ／Ｌ范围内呈线性关系，检出限为２×１０－８ｍｏｌ／Ｌ对极谱性质及反应机理进行了研究，用该法测定了大豆和茶叶中的微量锰，结果满意     

Utilization of a Copper Solid Amalgam Electrode for the Analytical Determination of Atrazine

A copper solid amalgam electrode was prepared and used for the voltammetric determination of atrazine in natural water samples by square wave voltammetry. This electrode is a convenient substitute for the hanging mercury electrode since it is selective, sensitive, reliable and inexpensive and presents low toxicity characteristic. The detection limit of atrazine obtained in pure water (laboratory samples) was shown to be lower than the maximum limit of residue established for natural water by the Brazilian Environmental Agency. The relative standard deviation for 10 different measurements was found to be only 3.98% in solutions containing 8.16×10^?6 mol L^?1 of atrazine. In polluted stream water samples, the recovery measurements were approximately 70.00%, sustaining the applicability of the proposed methodology to the analysis of atrazine in such matrices.     

Selective Determination of Quercetin Using Carbon Nanotube‐Modified Electrodes

Electrochemical detection of quercetin has been carried out on glassy carbon electrodes modified with carbon nanotubes and Nafion (GC/Nafion‐CNT). GC/Nafion‐CNT electrodes did not show passivation effect that occurs on the unmodified electrodes and displayed better stability and reproducibility. Quercetin oxidation was most favorable in acidic conditions and current gradually decreased as the solution pH increased. No oxidation was observed when two ? OH groups in a catechol moiety were fully deprotonated. These electrodes enabled selective determination of quercetin in the presence of interfering species such as ascorbic acid, uric acid, glucose, and catechol in large excess. Quantification of quercetin in a yellow onion has been made and favorably compared with reported values. Good selectivity and high sensitivity obtained by Osteryoung sSquare‐wave voltammetry can open new possibilities of direct quercetin determination in vegetables with a minimal sample treatment.     

Integrated Microanalytical System Coupling Permeation Liquid Membrane and Voltammetry for Trace Metal Speciation. Technical Description and Optimization

A new minicell coupling the liquid‐liquid extraction technique called permeation liquid membrane (PLM) with an integrated Ir‐based Hg‐plated microelectrode array for voltammetric detection has been developed for the speciation of heavy metals in natural waters. Lead and cadmium have been used as model compounds. The PLM consists of a carrier (0.1 M 22DD+0.1 M lauric acid) dissolved in 1 : 1 mixture of toluene/phenylhexane held in the small pores (30 nm) of a hydrophobic polypropylene membrane (Celgard 2500). One side of this membrane is in contact with a flowing source solution, containing the metal ions of interest. An acceptor or strip solution (pyrophosphate) is placed on the other side of the PLM with the microelectrode array placed at 480 μm of the PLM. The analyte is transported by the carrier from the source solution to the strip solution. The originality of the new minicell is that accumulation in the strip solution is voltammetrically followed by the integrated microelectrode array in real time, and at low concentration level, using square‐wave anodic stripping voltammetry (SWASV). In order to protect the Hg microelectrodes from the adsorption of the hydrophobic carrier, the microelectrodes are embedded in a thin gel layer (280 μm) of 1.5% LGL agarose gel containing 10% of hydrophobic silica particles C18. The choice of optimum conditions is discussed in details in this article. Due to the very small effective strip volume of the new cell (less than 1 μL), high enrichment factor can be obtained (e.g., 330 for Pb) after 2 hours of accumulation. No deaeration of the solutions is required for SWASV measurements. Detection limits under these conditions are 2 pM and 75 pM for Pb and Cd, respectively, using a voltammetric deposition time of 5 min. In addition, no fouling effects were observed with natural water samples.     

Quantitative High Resolution Electron Microscopy

 With the resolution becoming sufficient to reveal individual atoms, HREM is now entering the stage where it can compete with X-ray methods to quantitatively determine atomic structures of materials without much prior knowledge, but with the advantage of being applicable to aperiodic objects such as crystal defects. In our view the future electron microscope will be characterised by a large versatility in experimental settings under computer control such as the illumination conditions (TEM-STEM), CBED, detecting conditions (diffraction, image, ptychography) and many other tunable parameters such as focus (g), voltage, spherical aberration (C _s ), beam tilt, etc. Since modern detectors can detect single electrons, also the counting statistics is known. The only limiting factor in the experiment will be the total number of electrons that interact with the object during the experiment due to the limitations in the exposure time or in the object damage. However, instrumental potentialities will never be exploited fully if not guided by an experimental strategy. Here intuitive guidelines can be very deceptive. For instance an image made with the best electron microscope (C _s  = 0) at the best focus (g = 0) from the best object (phase object) would show no contrast at all. Hence, questions such as what is the best C _s , focus, object thickness, etc. can only be answered properly if done using a method of experiment design.