NMR Study of the Stoichiometry, Stability, and Ligand Interchange of Silver Ion-Hexathia-18-crown-6 Complex in Binary Dimethyl Sulfoxide Solvent Mixtures at 300 K

Proton NMR was used to study the complexation reaction between silver ion and hexathia-18-crown-6 in a number of binary mixed solvents of dimethyl sulfoxide with acetonitrile and methanol. Formation constants for the resulting 1:1 complexes in different solvent mixtures were determined by computer fitting of the chemical shift-mole ratio data. The influence of solvent composition on the stability of the resulting complex is discussed. The exchange kinetics of Ag⁺-hexathia-18-crown-6 in 70-30 wt.% dimethyl sulfoxide-acetonitrile and 75-25 wt.% dimethyl sulfoxide-methanol were studied by proton NMR line-shape analysis. In both solvent mixtures, the exchange of thiacrown ether between the free and complexed sites was found to proceed via a dissociative pathway. The exchange rates and the activation parameters E _a, H , S, and G for the ligand exchange were determined and the influence of solvent properties on these parameters discussed.     

X-Ray Powder Diffraction Studies of Polyhydrates of Cross-Linked Tetraisoamylammonium Polyacrylates

X-ray powder diffraction studies were performed of the polyhydrates, formed at positive temperature in swelled grains of carboxylic cation-exchange resins in the form of tetraisoamylammonium (cross-linked tetraisoamylammonium polyacrylates, differing in the degree of cross-linking: 1, 2 and 3%). It was shown that the polyhydrates exist as the crystalline phase under specific conditions, determined earlier by DTA technique. Diffraction patterns of the samples, recorded at the temperature +3 ± 1 °C, indicate that the polyhydrates crystallize in hexagonal symmetry, the unit cell parameters are close to a=12.25 Å, c=12.72 Å and do not depend significantly upon the degree of cross-linking. The suppositions were made concerning the size of hydrate crystallites, formed in the swelled grains of the studied resins.This revised version was published online in July 2005 with a corrected issue number.     

液相色谱-串联质谱法检测雄蜂蛹粉中50种抗生素残留

建立了液相色谱-串联质谱检测雄蜂蛹粉中50种抗生素残留（大环内酯类、喹诺酮类、磺胺类、四环素类、硝基咪唑类、林可霉素和氯霉素）的方法。样品经高氯酸溶液和醋酸铅溶液提取沉淀蛋白质，清液用磷酸氢二钾溶液调节pH值至8，经固相萃取净化后进行仪器分析。采用多反应监测正离子或负离子模式检测，可以一次完成对雄蜂蛹粉中50种目标化合物的定性和定量测定。50种抗生素的加标回收率为70.2%~118.3%，相对标准偏差（RSD）为1.8%~13.6%。该方法操作简便，灵敏度高，适用于雄蜂蛹粉中多种兽药残留的分析确证。     

偶合反应化学发光法测定痕量银的研究

本将Ａｇ（Ⅰ）催化Ｓ２Ｏ＾２－８氧化Ｍｎ（Ⅱ）生成ＭｎＯ＾－４的催化反应与ＬｕｍｉｎｏｌＭｎＯ＾－４－ＯＨ＾－的化学发光反应相偶合，建立起一种新的灵敏测定痕量银的化学发光分析法，在所研究的优化条件下，该法测定银的选择性较好，检测限达到３．２×１０＾－１２ｇ／ｍＬＡｇ线性浓度范围为１．０×１０＾－１１－１．０×１０＾－５ｇ／ｍＬＡｇ，用于水样分析，结果较为满意。     

Complexing equilibria and redox potentials in the system Ag(II)/Ag(I)-1,10-phenanthroline in propylene carbonate

Predominance areas of various equilibria were identified and complex formation constants of Ag(I) with 1,10-phenanthroline were determined as well as the solubility product of the complex salt for Ag(phen)₂ClO₄ in propylene carbonate. The solubility product of AgNO₃ in propylene carbonate was estimated. The value of the formal potential of the system Ag(phen) ₂ ²⁺ /Ag(phen) ₂ ⁺ inPC was determined by chronovoltammetry. Differences in the stability of analogous complexes in water andPC are discussed.

---

Die Gleichgewichtskonstante der Komplexierung und die Redoxpotentiale im System Ag(II)/Ag(I)-1,10-Phenantrolin in Propylencarbonat

Zusammenfassung Die Gebiete der Dominanz der einzelnen Gleichgewichte, die Bildungskonstanten ₁ und ₂ der Komplexe Ag(I) mit 1,10-Phenantrolin und der Wert des Löslichkeitsproduktes Ag(phen)₂ClO₄ in Propylencarbonat wurden bestimmt. Das Löslichkeitsprodukt von AgNO₃ in Propylencarbonat wurde abgeschätzt. Die Werte des formalen Potentials des Systems Ag(phen) ₂ ²⁺ /Ag(phen) ₂ ⁺ inPC wurden mit Hilfe cyclischer Voltametrie ermittelt. Es wurden weiterhin die Unterschiede in der Stabilität analoger Komplexe in Wasser und in Propylencarbonat diskutiert.

     

Preparation of La0.75Sr0.25MnO3 Nano-Phase Powders and Films from Alkoxide Precursors

The first purely alkoxide-based sol-gel route to nano-phase powders and thin films of perovskite La_0.75Sr_0.25MnO₃ is described. The phase and microstructure evolution on heat treatment of free gel films to form the target nano-phase oxide were investigated by TGA, IR spectroscopy, powder XRD, SEM and TEM-EDS. The xerogel consisted of a hydrated oxo-carbonate, without remaining alkoxo groups or solvent. Heating at 5°C·min^–1 decomposed the carbonate groups and yielded the pure perovskite La_0.75Sr_0.25MnO₃ at 760°C. The cell dimensions were virtually unchanged from the first observation of perovskite at 680°C, to 1000°C, 4 h. The monoclinic cell of La_0.75Sr_0.25MnO₃ obtained at 1000°C, 4 h, had the dimensions a = 5.475(1), b = 5.504(2), c = 7.771(1) Å, = 90.50(2), fitting the literature data quite well. Crack-free, homogenous, 150 nm thick La_0.75Sr_0.25MnO₃ films were prepared by spin-coating Si/SiO₂/TiO₂/Pt and polycrystalline -Al₂O₃ substrates with a 0.6 M alkoxide solution, followed by heating at 5°C·min^–1 to 800°C, 30 min.     

纳米银掺杂二氧化硅复合颗粒的制备及表征

0引言金属纳米颗粒因其粒子尺寸小(1￣100nm),比表面积大,表面原子数多,表面能和表面张力随粒径的下降急剧增大而具有量子尺寸效应[1]、小尺寸效应[2]、表面效应[3]及宏观量子隧道效应[4]等,从而出现了不同于常规固体的新奇特性,如:光学性质、磁性质以及电磁学性质[5],使其在催化、信息存储及非线性光学等领域展示了广阔的应用前景[6]。虽然制备金属纳米颗粒的方法有很多[6],但是由于纳米尺寸的金属颗粒具有较高的表面能,容易发生聚集,所以如何保持其稳定性依旧是比较困难的问题。随着纳米科技的发展,人们正尝试用各种方法来解决这个问题:如…     

Ag／Al2O3选择性催化丙烯还原氮氧化物表面反应机理的原位红外光谱研究

 在富氧条件下Ag／Al2O3对以丙烯为还原剂选择性催化还原NOx的反应有很高的催化活性．本实验成功地利用原位红外光谱分析手段,在真实的催化反应条件下,探讨了丙烯选择性还原NOx的反应机理,证实了催化剂表面反应中间体Al－NCO和Ag－NCO虽在真空中稳定,但在实际反应条件下极为活泼．催化剂表面上R－ONO和R－NO2分解成NCO是整个反应的速度控制步骤．这一结论与在真空系统条件下对其反应机理的研究结果一致,证明了在这一反应体系中两种研究方法的相关性．同时本实验还从反应机理上探讨了催化剂的水蒸气中毒现象．水蒸气的存在阻碍了催化剂表面R－ONO和R－NO2的生成,并进一步阻碍了反应的速度控 制步骤,即R－ONO和R－NO2向Al－NCO和Ag－NCO的转化,但这是一种完全可逆的暂时中毒现象．结合相应的催化剂活性评价结果对表面反应机理进行了讨论．     

Zinc-catalyzed Williamson ether synthesis in the absence of base

Zinc powder was found to be a highly efficient catalyst for the synthesis of aromatic ethers using microwave heating in the presence of N,N-dimethylformamide as well as under stirring in an oil-bath using tetrahydrofuran as solvent without any inorganic base. This method can be used for selective mono-, di- or tri-O-alkylations.     

Pharmaceutical performance of solid dispersions containing poly(ethylene) glycol 6000 and diazepam or temazepamInfluence of grinding

The effect of grinding on the physical properties and pharmaceutical performance of solid dispersions made of poly(ethylene) glycol 6000 (PEG6000) and temazepam or diazepam was studied using differential scanning calorimetry (DSC), X-ray powder diffraction and dissolution experiments. DSC-analysis of flash-cooled dispersions revealed that amorphous PEG present immediately after grinding crystallised upon aging mainly into the twice folded modification and to a small extent into the extended form. DSC-analysis of dispersions kept in the slab form for 1 month and subsequently ground, revealed that in the abscence of the grinding impulse crystallisation of PEG6000 takes place in the same way as in dispersions ground immediately after preparation and then aged for 1 month. Grinding solid dispersions immediately after preparation resulted in superior dissolution properties compared with solid dispersions kept in the monolith-slab form and subsequently ground. This difference in dissolution properties was found to be attributed to the drug and not to the polymer, more precisely, it was suggested that the drug particle size in ground dispersions was smaller than in dispersions kept in the slab form and subsequently ground. These findings suggest that grinding of solid dispersions immediately after preparation is the preparation method of choice instead of liquid filling of hard gelatin capsules resulting in monoliths. This revised version was published online in July 2006 with corrections to the Cover Date.