A simple and general route for the preparation of pure and high crystalline nanosized lanthanide silicates with the structure of apatite at low temperature

Rare earth silicates with the structure of apatite are attracting considerable interest since they show oxygen ion conductivities higher than that of yttria-stabilized zirconia (YSZ) at moderate temperature. Based on the hydrothermal synthesis we presented a simple one step process for the direct preparation of the pure and the high crystalline nanosized rare earth silicates with the structure of apatite under a mild condition (230 °C). Since the preparation of the high crystalline silicon based rare earth apatites is performed at high temperature previously and accompanied by subsequent process of grinding, results of this work provide a promising alternative of the existing methodology. Furthermore, due to the relatively low temperature of the preparation of these materials, high doping of monovalent cation can be done, which was not achieved before.     

The Influence of the Conditions of Sol–Gel Synthesis on the Absorption and Fluorescence Spectra of Porphyrin Molecules in Silicate Matrices

On the basis of the investigation of the electronic absorption and fluorescence spectra of porphin introduced into inorganic and organo–inorganic silicate gel matrices, the participation of the surface hydroxyl groups in the formation of the dication form of porphin is shown. The influence of the gel matrix drying process on the reverse process of deprotonation of the porphin dication has been revealed.     

Influence of accelerated aging on clay-reinforced polyamide 6

Organically modified clay-reinforced polyamide 6 was subjected to accelerated heat aging to estimate its long-term thermo-oxidative stability and useful lifetime compared to the virgin material. Changes in molecular weight, and thermal and mechanical properties were monitored and connected to the polymer modification encountered during aging. The incorporation of the clay filler was found to result in moderate polymer degradation during processing, which became more pronounced with aging time at elevated temperature, imparting discoloration. Post-crystallization was favoured by short periods of heat exposure, leading to an increase of crystalline content. Conversely, extended chain scission occurring after prolonged residence time negatively affected crystallites' size, lowering the degree of crystallinity. The aging-induced transformations of crystal structures correlated well with materials' mechanical performance, yielding initially hard and brittle specimens which gradually adopted a softening behavior. Relative to the unfilled polymer, the loss of ductility during aging was milder in the case of nanocomposite, indicating that the clay filler restricted degradation, prolonging durability.     

羟基硅酸盐润滑油添加剂对45#钢/球墨铸铁摩擦副摩擦磨损性能的影响

采用MM-200型摩塔磨损试验机考察了45^#钢／球墨铸铁摩擦副在650SN基础油和含羟基硅酸盐矿物复合微粉的650SN基础油(KF-1)润滑下的摩擦磨损性能，结果表明：在650SN基础油润滑下的摩擦系数和磨损率随试验时间增加变化较小；而在KF-1润滑下，试验初期的摩擦系数和磨损率比基础油润滑下的稍大，随着试验时间的延长，相应的摩擦系数和磨损率同基础油润滑下的相比明显降低．磨损表面显微硬度测试结果表明，在KF-1润滑下45^#钢磨损表面形成了多孔摩擦改性层，硬度明显提高，因而摩擦磨损性能显著改善．     

Adsorption Studies of Radionuclides and Toxic Metal Ions on a Modified Mesoporous Lanthanum(III) Silicate

A new adsorbent, modified mesoporous lanthanum(III) silicate, has been prepared with various molar ratios of Si/La (10, 20, 40, 80) and cethyltrimethylammonium bromide (CTAB) as structure directing agent. XRD, nitrogen sorption, SEM, IR, thermogravimetry and sorption of radionuclides and toxic metal ions have been studied. The results show that adsorption amount of some element such as Pb(II) and Th(IV) has been increased significantly by incorporation of lanthanum ions in the framework of adsorbent. Separation of Co(II)‐Th(IV), Co(II)‐U(VI) and Mo(VI)‐U(VI) has been developed on columns of this adsorbent.     

Effect of cation doping on ionic and electronic properties for lanthanum silicate-based solid electrolytes

Electronic as well as ionic conducting properties for oxyapatite-type solid electrolytes based on lanthanum silicate, La_9.333 + xSi₆O_26 + 1.5x (LSO) were investigated in the oxygen-excess region (x > ca. 0.3). We have found that the oxygen excess-type LSO (OE-LSO), namely La₁₀Si₆O₂₇ on weighted basis, exhibited high conductivity, and substitution of the Si-site of LSO with some dopants (Mⁿ⁺) had a positive effect toward the conducting property. Furthermore, it was also found that addition of a very small amount of iron ions into the M-doped OE-LSO, La₁₀(Si_6-yMⁿ⁺_y)O_27-(2-0.5n)y, improved its conductivity. On the other hand, replacement of the La-site with various ions for La₁₀(Si_6-yMⁿ⁺_y)O_27-(2-0.5n)y did little to improve conductivity. The electronic transport numbers for Al-doped OE-LSO with Fe-addition, (1-α){La₁₀(Si_5.8Al_0.2)O_26.9}-α(FeO_γ), evaluated with the Hebb-Wagner polarization method were very low: i.e., 1.1 × 10^− 3 and 2.9 × 10^− 3 under P(O₂) = 1.1 × 10⁴ Pa at 1073 K for α = 0.00 and 0.005, respectively. Conductivity for each sample was unchanged under humidified atmosphere at 1073 K sustained for over 50 h, revealing that both compositions were chemically stable. It was concluded that 0.995{La₁₀(Si_5.8Al_0.2)O_26.9}-0.005(FeO_γ) is suitable for the fuel cell electrolytes because of its high and almost pure ionic conductivity, and its good chemical stability under humidified as well as reducing conditions.     

Pre-hydrolysed ethyl silicate as an alternative precursor for SiO2-coated carbon nanofibers

This work reported basically aims at understanding the extent of SiO₂-coated carbon nanofibers using two different sol-gel precursors for the silicate glass. The silicate precursors employed were tetraethoxysilane (TEOS) and pre-hydrolysed ethyl silicate. The first route consisted in an acid hydrolysis and polycondensation of the TEOS and the second one in a polycondensation of the pre-hydrolysed ethyl silicate. The techniques of Fourier Infra Red spectroscopy, thermogravimetric analysis, scanning electron microscopy and X-ray diffraction were used to characterize the materials obtained. Both kinds of SiO₂ precursor can coat the CNF effectively. However, the use of pre-hydrolysed ethyl silicate (faster gelation times and higher surface areas) can be considered a low-cost and facile alternative with respect to the use of TEOS, to obtain industrially silica-coated carbon nanofibers.     

Effect of drying technique on the physicochemical properties of sodium silicate-based mesoporous precipitated silica

The conventional drying (oven drying) method used for the preparation of precipitated mesoporous silica with low surface area (>300 m²/g) and small pore volume is often associated with a high production cost and a time consuming process. Therefore, the main goal of this study was to develop a cost-effective and fast drying process for the production of precipitated mesoporous silica using inexpensive industrial grade sodium silicate and spray drying of the precipitated wet-gel silica slurry. The precipitated wet-gel silica slurry was prepared from an aqueous sodium silicate solution through the drop-wise addition of sulfuric acid. Mesoporous precipitated silica powder was prepared by drying the wet-gel slurry with different drying techniques. The effects of the oven drying (OD), microwave drying (MD), and spray drying (SD) techniques on the physical (oil, water absorption, and tapping density), and textural properties (specific BET surface area, pore volume, pore size, and % porosity) of the precipitated mesoporous silica powder were studied. The dried precipitated mesoporous silica powders were characterized with field-emission scanning electron microscopy; Brunauer, Emmett and Teller and BJH nitrogen gas adsorption/desorption methods; Fourier-transform infrared spectroscopy; thermogravimetric and differential analysis; N₂ physisorption isotherm; pore size distribution and particle size analysis. There was a significant effect of drying technique on the textural properties, such as specific surface area, pore size distribution and cumulative pore volume of the mesoporous silica powder. Additionally, the effect of the microwave-drying period on the physicochemical properties of the precipitated mesoporous silica powder was investigated and discussed.     

Nafion®/(organically modified silicate) nanocomposites via polymer in situ sol–gel reactions: Mechanical tensile properties

A series of Nafion®/[organically modified silicate (ORMOSIL)] hybrid materials have been created by in situ sol–gel copolymerizations of tetraethylorthosilicate and semiorganic silicon alkoxide monomers. The trends in the mechanical tensile properties of these hybrid materials were largely rationalized in terms of the entrapment of the long sulfonic acid side chains in silicate or ORMOSIL structures. There is a significant increase in the mechanical strength relative to that of unfilled Nafion®, except in one case. Young's modulus is enhanced relative to that of unfilled acid form Nafion® in a number of cases, although the degree of ductility is reduced relative to that of unfilled Nafion®. The filler fractions are beneath a critical value that would reflect percolation of a glassy, direct load‐bearing silicate phase. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2237–2247, 2002