Catalytic hydrogenation of benzo(a) and benzo(e) pyrenes. Analysis of the hydrogenated products by charge transfer chromatography and HPLC on amino bonded phase

Summary Hydroaromatics (partially hydrogenated polycyclic aromatic hydrocarbons) generated in the course of the process play an important role in the catalytic hydroliquefaction of coal. A difficult analytical task is to identify and to quantify these hydroaromatics among the preponderant polycyclic aromatic hydrocarbons. Generally speaking, the method carried out uses the specific separation of hydroaromatic by charge transfer chromatography. Structural identification is effected by using gas chromatography, alone or coupled with mass spectrometry, and HPLC on amino bonded phase with UV detection.As an aid to obtaining the standard compounds that are essential in that work, this paper describes the application of the above analytical procedure to the catalytic hydrogenation products (RhCl₃/NaBH₄ and Pd/C) of benzo(a) and benzo(e)pyrenes.     

Ion-pair chromatography of dianionic species by dionium reagents

Summary Dionium cations, polymethylenebis(tributylphosphonium)s (BuC_nBPs), were used as ion-pair reagents for ion-pair chromatography of dianionic species, such as maleate, fumarate, phthalates, and naphthalenedisulfonates. The longer the length of methylene chain connecting the two phosphonium cationic ceterns within BuC_nBP, the larger was the retention of these dianionic species. The dionium reagents had a higher retention ability compared to conventional monoonium reagents, and enabled a higher resolution among the dianionic species of structural isomers. The extraction behavior of the dianionic species in a loctanol/water system was also investigated. The retention behavior by the use of BuC_nBP was discussed in comparison with the extraction behavior.     

Studies of the influence of hydrogen chloride on the liquid chromatographic properties of amino bonded phases

Summary The influence of hydrogen chloride on the retention properties of aminopropyl bonded phases is studied using a series of simple aromatics, phenols and acids. The result of the HCL treatment is to mediate the hydrogen bonding interaction between the solute's polar functional groups and the bound amino groups.     

Enantioselective comprehensive two‐dimensional gas chromatography. A route to elucidate the authenticity and origin of Rosa damascena Miller essential oils

The analysis of Bulgarian and Turkish Rosa damascena Miller essential oils was performed by flow‐modulated comprehensive two‐dimensional gas chromatography using simultaneous detection of the second column effluent by flame ionization and quadrupole mass spectrometric detection. Enantioselective separations were obtained by running the samples on 2,3‐di‐O‐ethyl‐6‐O‐tert‐butyldimethylsilyl‐β‐cyclodextrin column as the first column and on polyethylene glycol as the second column. The determination of enantiomeric or diastereomeric excess of some terpenoic solutes is a possible route for quality or authenticity control as well as for the elucidation of the country of origin.     

Effect of temperature on the protonation of N-(2-hydroxyethyl)ethylenediamine-N,N′,N′-triacetic acid in aqueous solutions: Potentiometric and calorimetric studies

The TALSPEAK process (Trivalent Actinide Lanthanide Separations by Phosphorus-reagent Extraction from Aqueous Komplexes) has been demonstrated in several pilot-scale operations to be effective at separating trivalent actinides (An³⁺) from trivalent lanthanides (Ln³⁺). However, fundamental studies have revealed undesired aspects of TALSPEAK, such as the significant partitioning of Na⁺, lactic acid, and water into the organic phase, thermodynamically unpredictable pH dependence, and the slow extraction kinetics. In the modified TALSPEAK process, the combination of the aqueous holdback complexant HEDTA (N-(2-hydroxyethyl)ethylenediamine-N,N′,N′-triacetic acid) with the extractant HEH[EHP] (2-ethyl(hexyl) phosphonic acid mono-2-ethylhexyl ester) in the organic phase has been found to exhibit a nearly flat pH dependence between 2.5 and 4.5 and more rapid phase transfer kinetics for the heavier lanthanides. To help understand the speciation of Ln³⁺ and An³⁺ in the modified TALSPEAK, systematic studies are underway on the thermodynamics of major reactions in the HEDTA system under conditions relevant to the process (e.g., higher temperatures). Thermodynamics of the protonation and complexation of HEDTA with Ln³⁺ were studied at variable temperatures. Equilibrium constants and enthalpies were determined by a combination of techniques including potentiometry and calorimetry. This paper presents the protonation constants of HEDTA at T = (25 to 70) °C. The potentiometric titrations have demonstrated that, stepwise, the first two protonation constants decrease and the third one slightly increases with the increase of temperature. This trend is in good agreement with the enthalpy of protonation directly determined by calorimetry. The results of NMR analysis further confirm that the first two protonation reactions occur on the diamine nitrogen atoms, while the third protonation reaction occurs on the oxygen of a carboxylate group. These data, in conjunction with the thermodynamic parameters of Ln³⁺/An³⁺ complexes with HEDTA at different temperatures, will help to predict the speciation and temperature-dependent behavior of Ln³⁺/An³⁺ in the modified TALSPEAK process.     

Pushing the speed limit in enantioselective supercritical fluid chromatography

Chromatographic enantioseparations on the order of a few seconds can be achieved by supercritical fluid chromatography using short columns packed with chiral stationary phases. The evolution of ‘world record’ speeds for the chromatographic separation of enantiomers has steadily dropped from an industry standard of 20–40 min just two decades ago, to a current ability to perform many enantioseparations in well under a minute. Improvements in instrument and column technologies enabled this revolution, but the ability to predict optimal separation time from an initial method development screening assay using the t_{min cc} predictor greatly simplifies the development and optimization of high‐speed chiral chromatographic separations. In this study, we illustrate how the use of this simple tool in combination with the workhorse technique of supercritical fluid chromatography on customized short chiral columns (1–2 cm length) allows us to achieve ultrafast enantioseparations of pharmaceutically relevant compounds on the 5–20 s scale, bringing the technique of high‐throughput enantiopurity analysis out of the specialist realm and into the laboratories of most researchers.     

Field-flow fractionation in microfluidic channels of low aspect ratio

The shape of the steady-state three-dimensional flow velocity profile established in carrier liquid flowing inside the rectangular cross-sectional channel for field-flow fractionation should be taken into account to optimize the separation. The central parts of this profile in the planes parallel to the main channel walls are flat with almost identical flow velocities which drop down to zero at the side walls. The separated species transported by the flow in the close-to-side walls regions move with lower average velocities compared to the species transported in the central part of the channel and are undesirably broadened. The hydrodynamic splitting of the carrier liquid at the entry of the channel where the sample is injected only into the central part of the channel eliminates the excessive zone broadening. The aspect ratio of the breadth to the thickness of the channel ratio can thus be reduced. The effect of various aspect ratios on the shape of the flow velocity profile is calculated and the results are used to optimize the aspect ratio of microfluidic channels. The experiments carried out by microthermal field-flow fractionation confirmed that the aspect ratio cannot be reduced to a value of 1, proposed by other authors.     

Fast and simultaneous determination of phenolic compounds and caffeine in teas, mate, instant coffee, soft drink and energetic drink by high-performance liquid chromatography using a fused-core column

A fast HPLC method with diode-array absorbance detector and fluorescence detector for the analysis of 19 phenolic acids, flavan-3-ols, flavones, flavonols and caffeine in different types of samples was developed. Using a C₁₈ reverse-phase fused-core column separation of all compounds was achieved in less than 5 min with an overall sample-to-sample time of 10 min. Evaluation of chromatographic performance revealed excellent reproducibility, resolution, selectivity and peak symmetry. Limits of detection for all analyzed compounds ranged from 0.5 to 211 μg L⁻¹, while limits of quantitation ranged between 1.5 and 704 μg L⁻¹. The developed method was used for the determination of analytes present in different samples, including teas (black, white, green), mate, coffee, cola soft drink and an energetic drink. Concentration of the analyzed compounds occurring in the samples ranged from 0.4 to 314 mg L⁻¹. Caffeine was the analyte found in higher concentrations in all samples. Phytochemical profiles of the samples were consistent with those reported in the literature.     

Methacrylate monolithic stationary phases for gradient elution separations in microfluidic devices

Methacrylate monolithic stationary phases were produced in fused-silica chips by UV initiation. Poly(butyl methacrylate-co-ethylene dimethacrylate) (BMA) and poly(lauryl methacrylate-co-ethylene dimethacrylate) (LMA) monoliths containing 30, 35 and 40% monomers were evaluated for the separation of peptides under gradient conditions. The peak capacity was used as an objective tool for the evaluation of the separation performance. LMA monoliths of the highest density gave the highest peak capacities (≈40) in gradients of 15 min and all LMA monoliths gave higher peak capacities than the BMA monoliths with the same percentage of monomers. Increasing the gradient duration to 30 min did not increase the peak capacity significantly. However, running fast (5 min) gradients provides moderate peak capacities (≈20) in a short time. Due to the system dead volume of 1 μL and the low bed volume of the chip, early eluting peptides migrated over a significant part of the column during the dwell time under isocratic conditions. It was shown that this could explain an increased band broadening on the monolithic stationary phase materials used. The effect is stronger with BMA monoliths, which partly explains the inferior performance of this material with respect to peak capacity. The configuration of the connections on the chip appeared to be critical when fast analyses were performed at pressures above 20 bar.     

A novel pseudo simulated moving bed with solvent gradient for ternary separations

A novel pseudo simulated moving bed was suggested to separate a ternary mixture. A solvent gradient was created to make the solvent strength decreasing from zone II to zone III. Under suitable conditions, the least retained solute A moved forward and the most retained solute C moved backward in zones II and III whereas the medium retained solute B moved forward in zone II but backward in zone III to be trapped in the two zones consequently. Once the columns in zones II and III were saturated with solute B, the solvent dissolving the feed was introduced at the feed port to remove solute A from the raffinate-port and solute C from the extract-port. Finally, solute B was recovered from the extract port by stopping the liquid flow in zone II. This scheme was validated by the successful separation of dihydrocapsaicin from capsaicinoids.