复杂的可编程逻辑器件在可控电抗器中的应用

分析了磁阀式可控电抗器的结构和工作原理,通过直流控制电流控制铁芯的饱和度来调节电抗器的投入容量,采用可控硅和复杂的可编程逻辑器件（ＣＰＬＤ）为其设计了控制装置,实现了电抗器容量的自动连续调节,具有响应速度快、可靠性高的特点,并在电网无功补偿中得到了较好的应用．     

Dynamic aspects of phase decomposition in reactive blends of polycarbonate and syndiotactic polymethyl methacrylate

Dynamics of phase separation in bisphenol-A polycarbonate (PC)/syndiotactic polymethyl methacrylate (sPMMA) blends has been investigated by means of time-resolved light scattering. Solvent-cast films of the PC/sPMMA blends were transparent, suggestive of miscible character. Several temperature jumps were carried out at a 50/50 PC/sPMMA composition from a homogeneous state (room temperature) into a two-phase regime. The process of phase separation first occurred for some considerable period, then it was followed by phase dissolution driven by chemical reaction. The thermodegradative reaction of sPMMA triggered the dissolution process by probably forming PC/sPMMA graft or random copolymers at the interface, which eventually resulted in a single phase. However, annealing at elevated temperatures for an extended period could lead to cross-linking, and thus a two-phase structure could be fixed permanently. The early stage of spinodal decomposition was interpreted in terms of the linearized Cahn-Hilliard theory. In the late stages of spinodal decomposition, the relationship between scattering peak wavenumber and time was found to obey a power law, but the exponents showed a strong dependence on temperature jumps. The temporal universal scaling failed due to the influence of the chemical reaction. © 1995 John Wiley & Sons, Inc.     

Preparation of a novel HALS polypropylene stabilizer

The radiation induced graft copolymerization of m-isopropenyl-α,α-dimethyl benzyl iso-cyanate (m-TMI) and styrene onto polypropylene was carried out. The extent of grafting increased with increasing amount of styrene and with increased radiation dose. A graft load of 180% was obtained by immersing a 50 kGy pre-irradiated film in a monomer solution containing 25 mol % m-TMI and 75 mol % styrene. The graft copolymer is suitable for covalently binding nonpolymerizable stabilizers with a suitable nucleophilic moiety. In this work the isocyanate moiety of the graft copolymer was allowed to react with 4-amino-2,2,6,6-tetramethyl piperidine, a hindered amine light stabilizer. Fourier trans-formed infrared spectroscopy confirmed the formation of an urea moiety. © 1995 John Wiley & Sons, Inc.     

Tracking X‐ray‐derived redox changes in crystals of a methylamine dehydrogenase/amicyanin complex using single‐crystal UV/Vis microspectrophotometry

X‐ray exposure during crystallographic data collection can result in unintended redox changes in proteins containing functionally important redox centers. In order to directly monitor X‐ray‐derived redox changes in trapped oxidative half‐reaction intermediates of Paracoccus denitrificans methylamine dehydrogenase, a commercially available single‐crystal UV/Vis microspectrophotometer was installed on‐line at the BioCARS beamline 14‐BM‐C at the Advanced Photon Source, Argonne, USA. Monitoring the redox state of the intermediates during X‐ray exposure permitted the creation of a general multi‐crystal data collection strategy to generate true structures of each redox intermediate.     

Mid-infrared polarization spectroscopy of C2H2: Non-intrusive spatial-resolved measurements of polyatomic hydrocarbon molecules for combustion diagnostics

Polarization spectroscopy in the mid-infrared (IRPS) has been applied to the detection of acetylene molecules making use of the asymmetric C-H stretching vibration at around 3 μm. The infrared laser pulses were produced through difference frequency generation in a LiNbO₃ crystal pumped by a Nd:YAG and dye laser system. By directly probing the ro-vibrational transitions with IRPS, sensitive detection of molecules with otherwise inaccessible electronic states was realized with high temporal and spatial resolution by using a pulsed laser and a cross-beam geometry. Detection sensitivities of 2 × 10¹³ molecules/cm³ (10 ppm in 70 mbar gas mixture) of C₂H₂ were achieved using the P(1 1) line of the (0 1 0(1 1)⁰)-(0 0 0 0⁰ 0⁰) band. The dependence of the IRPS signal on the pump laser fluence, acetylene mole fraction, and buffer gas pressure of Ar, N₂, H₂, and CO₂ has been studied experimentally. The investigation demonstrates the quantitative nature of IRPS for sensitive detection of polyatomic IR active molecules. In order to fully demonstrate the technique for combustion applications, nascent acetylene molecules were measured in a low pressure methane/oxygen flame.     

Poly(lactic acid) composites with poly(lactic acid)‐modified carbon nanotubes

This work reports the study of the effect of chemical functionalization of carbon nanotubes on their dispersion in poly(lactic acid). The nanotubes were functionalized by the 1,3‐dipolar cycloaddition reaction, generating pyrrolidine groups at the nanotube surface. Further reaction of the pyrrolidine groups with poly(lactic acid) was studied in solution and in the polymer melt. The former involved refluxing the nanotubes in a dimethylformamide/polymer solution; the latter was carried out by direct melt mixing in a microcompounder. The carbon nanotubes collected after each process were characterized by thermogravimetry and by X‐ray photoelectron spectroscopy, showing evidence of polymer bonded to the nanotube surface only when the reaction was carried out in the polymer melt. The composites with polymer modified nanotubes present smaller average agglomerate area and a narrower agglomerate area distribution. In addition, they show improved tensile properties at low CNT concentration and present lower electrical resistivity. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3740–3750     

Equilibrium Studies on Reactive Extraction of α-Cyclohexylmandelic Enantiomers Using Hydrophilic β-Cyclodextrin Derivatives Extractants

β‐Cyclodextrin (β‐CD) is negligibly soluble in organic liquids and can be modified to achieve a higher solubility in water. In this paper, racemic α‐cyclohexyl‐mandelic acid (α‐CHMA) was separated by chiral reactive extraction with aqueous β‐cyclodextrin derivatives. Hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD), hydroxyethyl‐β‐cyclodextrin (HE‐β‐CD), and methyl‐β‐cyclodextrin (Me‐β‐CD) were selected as chiral selectors for reactive extraction of α‐CHMA enantiomers from organic phase to aqueous phase. Factors affecting the extraction efficiency were investigated, including the types of organic solvents and β‐CD derivatives, the concentrations of the chiral selector and α‐CHMA enantiomers, pH and temperature. The experimental results demonstrate that HP‐β‐CD, HE‐β‐CD, and Me‐β‐CD have stronger recognition abilities for S‐α‐CHMA than for R‐α‐CHMA. Among the three derivatives, HP‐β‐CD shows the strongest separation factor for α‐CHMA enantiomers. A high enantioseparation efficiency with a maximum separation factor (α) of 2.02 is observed at pH 2.5 and 5°C.     

Fe and N diffusion in nitrogen-rich FeN measured using neutron reflectometry

Grazing incidence neutron reflectometry provides an opportunity to measure the depth profile of a thin film sample with a resolution <1 nm, in a non-destructive way. In this way the diffusion across the interfaces can also be measured. In addition, neutrons have contrast among the isotopes, making it feasible to measure the self-diffusion. In the present work, the isotope multilayers of [FeN/⁵⁷FeN]₁₀ and [FeN/Fe¹⁵N]₁₀ were prepared using magnetron sputtering and self-diffusion of Fe and N was investigated. It was found that N diffusion is slower compared to Fe and does not follow the atomic size dependence.