High-Throughput Analysis of Sofalcone in Human Plasma by Use of Automated 96-Well Protein Precipitation and LC-MS-MS

A sensitive and selective method for the determination of sofalcone in human plasma was established by use of protein precipitation and liquid chromatography-tandem mass spectrometry. Plasma samples were transferred into 96-well plate using an automated sample handling system and spiked with 10 L of 2 g mL^–1 internal standard solution (d₃-sofalcone). 0.5 mL of acetonitrile was added to the 96-well plate and the plasma samples were then vortexed for 30 sec. After centrifugation, the supernatant was transferred into another 96-well plate and completely evaporated at 40 °C under a stream of nitrogen. The dry residue was reconstituted with mobile phase. All sample transfer and protein precipitation was automated through the application of both the PerkinElmer MultiPROBE II HT and TOMTEC Quadra 96 workstation. The limit of quantitation of sofalcone was 2 ng mL^–1 using a sample volume of 0.2 mL for the analysis. The reproducibility of the method was evaluated by analyzing five samples at nine quality control (QC) levels over the nominal concentration range from 2 ng mL^–1 to 1000 ng mL^–1. Validation of the method showed that the assay has good precision and accuracy. Sofalcone and internal standard produced a protonated precursor ion ([M+H]⁺) at m/z 451 and 454, and both gave a corresponding product ion at m/z 315. The high sample throughput of the method has been successfully applied to a pharmacokinetic study of sofalcone in human plasma.     

Ein neues Samariumnitridsulfid: Sm4N2S3

A New Samarium Nitride Sulfide: Sm₄N₂S₃ The oxidation of samarium with sulfur in the presence of SmCl₃ and NaN₃ as nitrogen source (molar ratio: 12:9:4:2, evacuated silica vessel, some NaCl as flux, 850°C, 7 d) yields Sm₄N₂S₃ as lath-shaped, dark red single crystals. The by-products (NaCl and NaSm₂Cl₆) are rinsed with water from the crude product. The crystal structure of Sm₄N₂S₃ (monoclinic, C2/m (no. 12), Z = 2, a = 1 318.04(12), b = 391.57(2), c = 1 031.76(9) pm, β = 130.874(6)°, R = 0.036, R_w = 0.031) contains two crystallographically different Sm³⁺, both in sixfold coordination of the anions. Besides distorted octahedra [(Sm1)N₃S₃] and [(Sm2)NS₅], tetrahedra [(N^3?)(Sm)] connected via two cis-oriented edges to form chains [N(Sm1)_3/3(Sm2)_1/1]³⁺ build up the Mayn structural feature. These are arranged in the fashion of a closest packing of rods and held together by two crystallographically different S^2? anions which take care for charge neutrality and three-dimensional interconnection.     

Strukturen aus AIB2− und BaAl4−analogen Einheiten. I Die Verbindungen Sr4Pd5P5 und Sr2Pd3P3

Structures with AIB₂? and BaAl₄?type Units. I The Compounds Sr₄Pd₅P₅ and Sr₂Pd₃P₃ Sr₄Pd₅P₅ (Cmcm, a = 4.177(1) Å, b = 31.377(5) Å, c = 8.581(2) Å, Z = 4) und Sr₂ Pd₃P₃(Pmmm, a = 4.199(1) Å, b = 4.212(1) Å, c = 34.227(4) Å, Z = 4) have been prepared by heating the elements. Both structures contain exclusively units characteristic for the AIB_2? and BaAl₄?type. The ratio between isolated P-atoms and P₂?pairs is interpreted with an ionic splitting of the formulas.     

Darstellung und Kristallstruktur von Ethylendiammonium-Selenostannaten(IV) sowie von [2 SnSe2 · en]∞

Preparation and Crystal Structure of Ethylenediammonium Selenostannates(IV) and [2 SnSe₂ · en]∞ The selenostannates(IV) [enH₂]₂[Sn₂Se₆] · en 1 and [enH₂][Sn₃Se₇] · 1/2en 2 have been prepared by the methanolothermal reaction of SnSe₂ with ethylenediamine (en) (160°C, 13 bar) in the presence of respectively Se or BaSe. The [Sn₂Se₆]^4? anion in 1 consists of two edgebridged SnSe₄ tetrahedra and displays crystallographic C_i symmetry. The crystal structure of 2 contains polyselenostannate(IV) sheet anions [Sn₂Se₇²], for which the basic elements are trigonal SnSe₅ bipyramids. Each of the three symmetry independent Sn atoms is linked to the other Sn atoms via Sn? Se? Sn bridges leading to the formation of Sn₃Se₁₀ units. Methanolothermal reaction of SnSe₂ with en alone yields the edge-bridged chain structure [2 SnSe₂ en]∞ 3 , in which each of the Sn atoms is bonded to four Se atoms. Every second Sn atom is also coordinated by an en molecule and displays, therefore, an octahedral geometry. The remaining Sn atoms are coordinated tetrahedrally by Se atoms.     

Quo Vadis total reflection X-ray fluorescence?

The multielement trace analytical method ‘total reflection X-ray fluorescence’ (TXRF) has become a successfully established method in the semiconductor industry, particularly, in the ultra trace element analysis of silicon wafer surfaces. TXRF applications can fulfill general industrial requirements on daily routine of monitoring wafer cleanliness up to 300 mm diameter under cleanroom conditions. Nowadays, TXRF and hyphenated TXRF methods such as ‘vapor phase decomposition (VPD)-TXRF’, i.e. TXRF with a preceding surface and acid digestion and preconcentration procedure, are automated routine techniques (‘wafer surface preparation system’, WSPS). A linear range from 10⁸ to 10¹⁴ [atoms/cm²] for some elements is regularly controlled. Instrument uptime is higher than 90%. The method is not tedious and can automatically be operated for 24 h/7 days. Elements such as S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Br, Sn, Sb, Ba and Pb are included in the software for standard peak search. The detection limits of recovered elements are between 1×10¹¹ and 1×10⁷ [atoms/cm²] depending upon X-ray excitation energy and the element of interest. For the determination of low Z elements, i.e. Na, Al and Mg, TXRF has also been extended but its implementation for routine analysis needs further research. At present, VPD-TXRF determination of light elements is viable in a range of 10⁹ [atoms/cm²]. Novel detectors such as silicon drift detectors (SDD) with an active area of 5 mm², 10 mm² or 20 mm², respectively, and multi-array detectors forming up to 70 mm² are commercially available. The first SDD with 100 mm² (!) area and integrated backside FET is working under laboratory conditions. Applications of and comparison with ICP-MS, HR-ICP-MS and SR-TXRF, an extension of TXRF capabilities with an extremely powerful energy source, are also reported.     

八十年代海洋天然有机化学的进展

八十年代以来,海洋天然有机化学仍然继续发展,大量新的化合物,尤其是具有生理活性的化合物不断出现,海洋天然物的生物合成和人工合成研究也有新的进展。在海洋生物中,研究得最多的是海藻和海绵,其次便是珊瑚。     

Cs4[IrO4], ein neues Iridat mit planarem Anion [IrO4]4−

Cs₄[IrO₄], a New Iridate with Planar Anion [IrO₄]^4? For the first time we obtained black single crystals of Cs₄[IrO₄] by heating intimate mixtures of CsO_0.52 and IrO₂ (molar ratio Cs : Ir = 4.30 : 1.00; “Ag-bomb”, 740°C/86 d). Cs₄[IrO₄] crystallizes monocline, C 2/m, with a = 1031.66(8) pm, b = 671.61(4) pm, c = 660.44(6) pm, b? = 108.118(7)° and Z = 2 in the K₄[IrO₄]-type. The structure has been determined by four-circle-diffractometer data (PW 1100 from Phillips, Ag? Kα , graphite) with 841 I₀(hkl) with I ≥ 3s?(F) (from 947 I₀(hkl) out of 3529 measured reflexes). The Madelung Part of Lattice Energy, MAPLE, Effective Coordination Numbers, ECoN, these via Mean Fictive Ionic Radii, MEFIR, are calculated and discussed.     

Determination of Glimepiride in Human Plasma by LC-MS-MS and Comparison of Sample Preparation Methods for Glimepiride

A sensitive and selective method for quantitation of glimepiride in human plasma was established using liquid chromatography-electrospray ionization tandem mass spectrometry. Three different methods for the sample preparation of glimepiride and an internal standard were investigated (liquid-liquid extraction, solid-phase extraction and protein precipitation). Glipizide was used as an internal standard. Compounds were separated on a C₁₈ column with 80% acetonitrile and 20% deionized water (adjusted to pH 3.5 with acetic acid), as mobile phase at a flow rate of 200 L min^–1. By use of multiple reaction monitoring mode in MS-MS with liquid-liquid extraction and solid-phase extraction, glimepiride and glipizide were detected without severe interference from the human plasma matrix. Glimepiride produced a protonated precursor ion ([M+H]⁺) at m/z 491 and a corresponding product ion at m/z 352, and the internal standard produced a protonated precursor ion ([M+H]⁺) at m/z 446 and a corresponding product ion at m/z 321. The limit of quantitation was 0.1 ng mL^–1, 0.5 ng mL^–1 and 1.0 ng mL^–1 when using liquid-liquid extraction, solid-phase extraction and protein precipitation, respectively. The validation, reproducibility, stability, and recovery of the different sample preparation methods were comparable and all the methods gave reliable results. The method has been successfully applied to pharmacokinetic study of glimepiride in human plasma.     

α, α'-二胺基二苄基硒醚的合成

本文以苯骈三氮唑、胺和苯甲基醛为原料,发现Mannich反应,生成胺烷基化的苯骈三氮唑衍生物。在此衍生物中,苯骈三氮唑基是亲核取代反应的良好离去基团,易被强亲核试剂的硒负离子取代,生成对称α,α'-二胺基二苄基硒醚。反应易进行,产率较高,产物均为固体,易提纯。这是合成含氮原子的对称硒醚的较好方法。     

Bis(Cyclodisilazan-1-yl)dimethylsilane Synthese und Reaktionen

Bis(cyclodisilazane-1-yl) dimethylsilanes — Synthesis and Reactions The monolithium derivate of trisilazan-1-yl-cyclodisilazane 1 reacts with F₃SiN (SiMe₃)₂ with substitution. The silyl-bridged cyclodisilazanes 3–6 are formed in the reaction of the dilithium derivate of 1 with fluoro- and chlorosilanes. Using lithiumamide and lithiummethanolate a controlled exchange of one fluoro atom of 4 occurs ( 7,8 ). 9 and 10 are formed by hydrolysis of 4 . The aminofunctional compounds 11 und 12 are obtained in the reaction of 5 and 6 with NH₃. The dispirocyclus 13 is formed in the reaction of 8 with tert.-butyllithium. The reaction of dilithiated 1 with 4 gives the spirocyclus 14 . The crystal structure of 14 is discussed.