Structure and dynamics of carbon black‐filled elastomers

The linear and nonlinear melt viscoelastic properties for a series of carbon black‐filled polymer composites were studied. Complementary tapping‐mode atomic force microscopy (AFM) studies were used to examine the dispersion and structural correlations of the filler particles in these composites. The low‐frequency dependence of the linear viscoelastic moduli gradually changes from liquidlike behavior for the unfilled polymer to pseudosolid character for composites with more than 9 vol % carbon black filler. The plateau modulus, inferred from the linear viscoelastic response, exhibits a somewhat discontinuous change at about 9 vol % filler. On the basis of the linear viscoelastic response, we postulate that the carbon black filler forms a continuous percolated network structure beyond 9 vol % filler, considerably lower than that expected from theoretical calculations for overlapping spheres and ellipsoids. We suggest that the lower threshold for percolation is due to the polymer mediation of the filler structure, resulting from the low functionality of the polymer and, consequently, few strong polymer–filler interactions, allowing for long loops and tails that can either bridge filler particles or entangle with one another. Furthermore, the strain amplitude for the transition from linear behavior to nonlinear behavior of the modulus for the composites with greater than 9 vol % filler is independent of frequency, and this critical strain amplitude decreases with increasing filler concentration. Complementary AFM measurements suggest a well‐dispersed carbon black structure with the nearest neighbor distance showing a discontinuous decrease at about 9 vol % filler, again consistent with the formation of a filler network structure beyond 9 vol % carbon black. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 256–275, 2001     

周期光照下液晶弹性体简支梁的振动响应研究

液晶弹性体(LCE)因其具有快速的光热响应和可逆变形等特性,在能量转换、软机器人和非接触控制等领域具有广泛的应用前景。本文利用液晶弹性体在外部光刺激下可与机械变形耦合的特性,建立了LCE简支梁的动态模型,研究了其在周期光照下的弯曲振动现象。首先建立了LCE简支梁的光驱动控制方程,然后通过振型叠加法获得方程的半解析解,再用Matlab软件编程计算其变化规律。计算结果表明,周期光照可以使LCE简支梁发生周期性振动,梁跨中的振动幅值可以通过阻尼因子、热弛豫时间、光照强度、光照周期和光照时间率来调节,振动平衡位置可以通过光强与热弛豫时间来调节,振动反应时间可以通过热弛豫时间与阻尼来调节。本文结果对光驱动运动的控制和光机能量转换系统的设计具有一定的指导意义。     

Synthesis and properties of copolymers of ethylene/carbon monoxide with styrene/carbon monoxide

The terpolymerization of ethylene, styrene, and carbon monoxide was accomplished by two different palladium‐based catalysts: a phosphine‐based ligand system and a nitrogen‐based ligand system. The range of possible compositions and the composition dependence of the properties of the resulting polymers were determined. These polymers were essentially carbon monoxide versions of the ethylene styrene interpolymers recently presented by Dow. A comparison between the two families of polymers is attempted. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 752–757, 2000     

Simple and effective one‐pot synthesis of (meth)acrylic block copolymers through atom transfer radical polymerization

The synthesis of di‐ and triblock copolymers using atom transfer radical polymerization (ATRP) of n‐butyl acrylate (BA) and methyl methacrylate (MMA) is reported. In particular, synthetic procedures that allow for an easy and convenient synthesis of such block copolymers were developed by using CuBr and CuCl salts complexed with linear amines. Polymerizations were successfully conducted where the monomers were added to the reactor in a sequential manner. Poor cross‐propagation between poly(n‐butyl acrylate) (PBA) macroinitiators and MMA was minimized, and therefore control of molecular weights and distributions was realized, by using halogen exchange—a technique involving the addition of CuCl to the MMA during the chain extension of the PBA macroinitiator. High molecular weight (M_n ∼ 90,000) and low polydispersity (M_w /M_n < 1.35) ABA triblock copolymers were also prepared and their structure and properties in bulk have been preliminary characterized indicating the potential of ATRP for the production of all‐acrylic thermoplastic elastomers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2023–2031, 2000     

Microstructural model for prediction of stress–strain curves of amorphous and semicrystalline elastomers

A fundamental microstructural model was developed to calculate the stress–strain curves of rubbery amorphous polymers and of semicrystalline polymers with a rubbery amorphous phase by numerical simulations. The rubbery amorphous phase was treated by using a version of the theory of rubber elasticity with finite extensibility. Physical entanglements and chemical crosslinks were both allowed. Slippage was implemented by a Monte Carlo algorithm controlled by kinetic parameters such as the activation energy and activation volume for slippage. The crystalline phase was treated in a very idealized manner, including a crude representation of tie chains but not taking the internal structure of the crystallites into account. A two-dimensional embodiment of the model was implemented into software. For amorphous polymers, while lacking truly quantitative accuracy, the model showed sufficiently good agreement with the experimental trends to be used as a qualitative or semiquantitative predictive tool, and it is currently being used in this manner. The more complex semicrystalline version was less accurate and will need to be improved in future work. Most of the limitations of the semicrystalline version could be ascribed unambiguously to specific simplifications made in the software implementation to reduce the amount of computer time required for the calculations. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2715–2739, 1997     

Thermoplastic elastomer gels. I. Effects of composition and processing on morphology and gel behavior

Thermoplastic elastomer gels (TPEGs) composed of a poly[styrene-b-(ethylene-co-butylene)-b-styrene] triblock copolymer and a low-volatility, midblock-compatible mineral oil have been investigated at different oil concentrations to ascertain the effect of composition on TPEG morphology and mechanical properties. The impact of thermal processing is also examined by comparing gels thermally quenched to 0°C or slowly cooled to ambient temperature. Transmission electron micrographs reveal that gels with 70 to 90 wt % oil exhibit styrenic micelles measuring ca. 24 nm in diameter. Variation in composition or cooling rate does not have any perceivable effect on micelle size or shape, whereas the rate at which the gels are cooled influences the extent of microstructural order and the time to rupture (t_R) at constant strain. Dynamic rheological testing confirms the presence of a physically crosslinked network at TPEG compositions ranging from 70 to 90 wt % oil, independent of cooling rate. Results presented here suggest that the dynamic elastic shear modulus (G′) scales as t^α_R where α varies from 0.41 to 0.59, depending on cooling rate. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2379–2391, 1998     

Intelligent Surfaces Thermally Switchable between the Highly Rough and Entirely Smooth States

Reversible switching from a highly rough surface to another entirely smooth surface under external stimuli is crucial for intelligent materials applied in the fields of anti-fogging,self-cleaning,oil-water separation and biotechnology.In this work,a thermal-responsive liquid crystal elastomer (LCE) surface covered with oriented micropillars is prepared via a facile two-step crosslinking method coupled with an extrusion molding program.The reversible change of topological structures of the LCE surface along with temperature is investigated by metallographic microscope,atomic force microscopy and optical contact angle measuring system.At room temperature,the LCE sample is filled with plenty of micropillars with an average length of 8.76 μm,resulting in a super-hydrophobic surface with a water contact angle (WCA) of 135°.When the temperature is increased to above the clearing point,all the micropillars disappear,the LCE surface becomes entirely fiat and presents a hydrophilic state with a WCA of 64°.The roughness-related wetting property of this microstructured LCE surface possesses good recyclability in several heating/cooling cycles.This work realizes a truly reversible transformation from a highly rough surface to an entirely smooth surface,and might promote the potential applications of this dynamic-responsive LCE surface in smart sensors and biomimetic control devices.     

Domain structure and interphase dimensions in poly(urethaneurea) elastomers using DSC and SAXS

Small‐angle X‐ray scattering (SAXS) and differential scattering calorimetry (DSC) were used to demonstrate distinct differences in domain size, phase separation, and hydrogen bonding in a series of segmented urethaneurea elastomers prepared from isocyanate‐terminated prepolymers and aromatic diamine chain extenders. Two types of prepolymers were studied. The first contained a broadly polydisperse high molecular mass oligomer with relatively high levels of free isocyanate monomer. The second type of prepolymer contained low levels of high molecular mass oligomers with mass fractions greater than 90% of the two‐to‐one adduct of toluene diisocyanate (TDI) to polytetramethylene glycol (PTMEG). The mass fraction of the residual unreacted diisocyanate was less than 0.1% in the second type. Two chain extenders, 4,4′‐methylene bis‐(2‐chloroaniline)(Mboca) and 4,4′‐methylene bis‐(3‐chloro‐2,6‐diethylaniline) (MCDEA), were used to convert the prepolymers to poly(urethaneurea) elastomers. Materials prepared from the prepolymers with low oligomer polydispersity exhibited smaller hard segment domains with more ordered morphology, greater phase separation, and more hydrogen bonding than those prepared from prepolymers with high oligomer polydispersity. These tendencies were enhanced in those elastomers prepared by chain extension with MCDEA compared to those made with Mboca. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2586–2600, 1999     

Pressure–Volume–Temperature properties of polyolefin liquids and their melt miscibility

The pressure–volume–temperature (P–V–T) properties of a number of metallocene-produced polyolefins were measured experimentally at 10 MPa ≤ P ≤ 200 MPa and 30°C ≤ T ≤ 220°C in a dilatometer-type P–V–T apparatus. These included ethylene copolymers typical of linear low density polyethylene, with several α-olefins as comonomers and a wide range of comonomer content. The experimental P–V–T data were correlated with the equations of state from the Sanchez–Lacombe and Flory–Orwoll–Vrij theories. The solubility parameter map of the polyolefins, at atmospheric pressure, was established on the basis of the thermodynamic data. As the temperature increases, the solubility parameter of the polyolefin decreases. The solubility parameters of copolymers of ethylene with propylene, butene, hexene, and octene under constant temperature are all more or less the same at equal weight percent of comonomer. As the incorporation of branches increases, the solubility parameter decreases. The melt miscibility of the polyolefin blends can be predicted to design various blend products for specific applications from this solubility parameter map. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2835–2844, 1999