Mussel‐Inspired Coatings Directed and Accelerated by an Electric Field

Polydopamine‐based coatings are fabricated via an electric field‐accelerating and ‐directing codeposition process of polydopamine with charged polymers such as polycations, polyanions, and polyzwitterions. The coatings are uniform and smooth on various substrates, especially on those adhesion‐resistant materials including poly(vinylidene fluoride) and poly(tetrafluoroethylene) membranes. Moreover, this electric field‐directed deposition method can be applied to facilely prepare Janus membranes with asymmetric chemistry and wettability.

     

Synthesis of polydopamine‐functionalized magnetic graphene and carbon nanotubes hybrid nanocomposites as an adsorbent for the fast determination of 16 priority polycyclic aromatic hydrocarbons in aqueous samples

A novel adsorbent made of polydopamine‐functionalized magnetic graphene and carbon nanotubes hybrid nanocomposite was synthesized and applied to determine 16 priority polycyclic aromatic hydrocarbons by magnetic solid phase extraction in water samples. FTIR spectroscopy, transmission electron microscopy, scanning electron microscopy, and Raman spectroscopy consistently indicate that the synthesized adsorbents are made of core–shell nanoparticles well dispersed on the surface of graphene and carbon nanotubes. The major factors affecting the extraction efficiency, including the pH value of samples, the amount of adsorbent, adsorption time and desorption time, type and volume of desorption solvent, were systematically optimized. Under the optimum extraction conditions, a linear response was obtained for polycyclic aromatic hydrocarbons between concentrations of 10 and 500 ng/L with the correlation coefficients ranging from 0.9958 to 0.9989, and the limits of detection (S/N = 3) were between 0.1 and 3.0 ng/L. Satisfactory results were also obtained when applying these magnetic graphene/carbon nanotubes/polydopamine hybrid nanocomposites to detect polycyclic aromatic hydrocarbons in several environmental aqueous samples.     

Preparation of iron‐based MIL‐101 functionalized polydopamine@Fe3O4 magnetic composites for extracting sulfonylurea herbicides from environmental water and vegetable samples

Here, we describe a simple one‐pot solvothermal method for synthesizing MIL‐101(Fe)@polydopamine@Fe₃O₄ composites from polydopamine‐modified Fe₃O₄ particles. The composite was used as a magnetic adsorbent to rapidly extract sulfonylurea herbicides. The herbicides were then analyzed by high‐performance liquid chromatography. The best possible extraction efficiencies were achieved by optimizing the most important extraction parameters, including desorption conditions, extraction time, adsorbent dose, salt concentration, and the pH of the solution. Good linearity was found (correlation coefficients >0.9991) over the herbicide concentration range 1–150 μg/L using the optimal conditions. The limits of detection (the concentrations giving signal/noise ratios of 3) were low, at 0.12–0.34 μg/L, and repeatability was good (the relative standard deviations were <4.8%, n = 6). The method was used successfully to determine four sulfonylurea herbicides in environmental water and vegetable samples, giving satisfactory recoveries of 87.1–108.9%. The extraction efficiency achieved using MIL‐101(Fe)@polydopamine@Fe₃O₄ was compared with the extraction efficiencies achieved using other magnetic composites (polydopamine@Fe₃O₄, Hong Kong University of Science and Technology (HKUST)‐1@polydopamine@Fe₃O₄, and MIL‐100(Fe)@polydopamine@Fe₃O₄). The results showed that the magnetic MIL‐101(Fe)@polydopamine@Fe₃O₄ composites have great potential for the extraction of trace sulfonylurea herbicides from various sample types.     

Realization of Walnut‐Shaped Particles with Macro‐/Mesoporous Open Channels through Pore Architecture Manipulation and Their Use in Electrocatalytic Oxygen Reduction

Herein we report a simple dual‐soft‐template approach to prepare walnut‐shaped macro‐/mesoporous polydopamine particles with diameter of ca. 270 nm, highly accessible bicontinuous channels and wide pore size distribution from ca. 20 nm to ca. 95 nm. This approach provides great opportunities to tailor the soft template‐directed assembly processes and generate various polydopamine particles with controllable mesophase curvature. Walnut‐shaped mesoporous carbon particles with large open mesochannels in the range of ca. 13 nm to ca. 50 nm can be fabricated by subsequent thermal treatment under nitrogen atmosphere. Lastly, we demonstrate that the as‐derived walnut‐shaped carbon particles manifest enhanced electrocatalytic performance for oxygen reduction reaction in alkaline electrolyte.     

PDA/SiO2大孔复合材料固定化荧光假单胞菌脂肪酶

以具有三维骨架结构的大孔聚合物为模板制备SiO_2大孔材料,通过多巴胺在SiO_2大孔材料孔道表面的原位聚合制得聚多巴胺表面功能化修饰的二氧化硅大孔材料(PDA/SiO_2)。应用SEM、EDX、MIP、BET、TG-DTA和FTIR等技术对修饰前后的材料进行表征。以PDA/SiO_2为载体固定荧光假单胞菌脂肪酶(PFL),优化固定化条件并对比游离脂肪酶和固定化脂肪酶的性质。结果表明SiO_2大孔材料具有三维连续贯通的孔道结构,孔径分布在300~500 nm,聚多巴胺修饰后形成聚多巴胺/二氧化硅复合纳米薄膜构筑的大孔材料。在固定化时间为14 h、p H值为8、初始脂肪酶浓度为0.4 mg·m L-1时,固定化效果最佳,酶活回收率达246%。与游离脂肪酶相比,固定化脂肪酶有更宽的温度和p H适用范围、热稳定性显著提高,并展现出良好的储存稳定性和操作稳定性,固定化脂肪酶的Km低于游离脂肪酶的,酶与底物的亲和性较好。     

聚多巴胺功能化的四氧化三钴纳米复合材料的制备及电催化性能

通过简单的自聚合反应在四氧化三钴表面包覆聚多巴胺膜,联合使用纳米铂和辣根过氧化物酶用于电催化还原过氧化氢。结果表明,聚多巴胺的使用增强后续纳米铂的负载量和辣根过氧化物酶的生物活性;四氧化三钴、纳米铂和辣根过氧化物酶的多重信号放大作用,大大增强了该复合材料的催化活性,提高了过氧化氢传感器的灵敏度。优化实验条件下,传感器对过氧化氢的检测范围为0.1～700μmol·L^-1,检测限为0.08μmol·L^-1。     

Dual Dopamine Derived Polydopamine Coated N-Doped Porous Carbon Spheres as a Sulfur Host for High-Performance Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries are considered to be one of the most promising energy storage systems owing to their high energy density and low cost. However, their wide application is still limited by the rapid capacity fading. Herein, polydopamine (PDA)-coated N-doped hierarchical porous carbon spheres (NPC@PDA) are reported as sulfur hosts for high-performance Li-S batteries. The NPC core with abundant and interconnected pores provides fast electron/ion transport pathways and strong trapping ability towards lithium polysulfide intermediates. The PDA shell could further suppress the loss of lithium polysulfide intermediates through polar–polar interactions. Benefiting from the dual function design, the NPC/S@PDA composite cathode exhibits an initial capacity of 1331 mAh g⁻¹ and remains at 720 mAh g⁻¹ after 200 cycles at 0.5 C. At the pouch cell level with a high sulfur mass loading, the NPC/S@PDA composite cathode still exhibits a high capacity of 1062 mAh g⁻¹ at a current density of 0.4 mA cm⁻².     

Surface Modification of Water Purification Membranes

Polymeric membranes are an energy‐efficient means of purifying water, but they suffer from fouling during filtration. Modification of the membrane surface is one route to mitigating membrane fouling, as it helps to maintain high levels of water productivity. Here, a series of common techniques for modification of the membrane surface are reviewed, including surface coating, grafting, and various treatment techniques such as chemical treatment, UV irradiation, and plasma treatment. Historical background on membrane development and surface modification is also provided. Finally, polydopamine, an emerging material that can be easily deposited onto a wide variety of substrates, is discussed within the context of membrane modification. A brief summary of the chemistry of polydopamine, particularly as it may pertain to membrane development, is also described.     

CuSO4/H2O2‐Induced Rapid Deposition of Polydopamine Coatings with High Uniformity and Enhanced Stability

Mussel‐inspired polydopamine (PDA) deposition offers a promising route to fabricate multifunctional coatings for various materials. However, PDA deposition is generally a time‐consuming process, and PDA coatings are unstable in acidic and alkaline media, as well as in polar organic solvents. We report a strategy to realize the rapid deposition of PDA by using CuSO₄/H₂O₂ as a trigger. Compared to the conventional processes, our strategy shows the fastest deposition rate reported to date, and the PDA coatings exhibit high uniformity and enhanced stability. Furthermore, the PDA‐coated porous membranes have excellent hydrophilicity, anti‐oxidant properties, and antibacterial performance. This work demonstrates a useful method for the environmentally friendly, cost‐effective, and time‐saving fabrication of PDA coatings.     

Application of polydopamine-coated nylon capillary-channeled polymer fibers as a stationary phase for mass spectrometric phosphopeptide analysis

Capillary-channeled polymer (C-CP) fibers are demonstrated as a selective stationary phase for phosphopeptide analysis via LC–MS. Taking advantage of the oxidative self-polymerization of dopamine under alkaline conditions, a simple system involving a dilute aqueous solution of 0.2% w/v dopamine hydrochloride in 0.15% w/v TRIS buffer, pH 8.5 was utilized to coat polydopamine onto nylon 6 C-CP fibers. Confirmation of the polydopamine coating on the fibers (nylon-PDA) was made through attenuated total reflection-FTIR (ATR-FTIR) analysis. Imaging using SEM was also performed to examine the morphology and topography of the nylon-PDA. Subsequent loading of Fe³⁺ to the nylon-PDA matrix was confirmed by SEM/energy dispersive X-ray spectroscopy (SEM/EDX). The Fe³⁺-bound nylon-PDA fibers packed in a microbore column format were tested in the off-line preconcentration of phosphopeptides from a 1:100 mixture of β-casein/BSA digests for MALDI-TOF analysis. The packed column was also installed onto an HPLC system as a platform for the online sample clean-up and enrichment of phosphopeptides from a 1:1000 mixture of β-casein/BSA protein digests that were determined by subsequent ESI–MS analysis.