用密度泛函理论研究多氯代菲醌的结构和热力学性质

使用Gaussian 03程序,采用密度泛函理论(DFT)在B3LYP/6-31G*水平上对136个多氯代9,10-菲醌(PCPQ)系列化合物进行全优化和振动分析,得到各分子在298.15K、101.3kPa状态下的优势构型.结合Gaussian 03程序的输出文件,计算了PCPQ化合物在200K至1 000K的摩尔恒压热容(Cp,m).用SPSS13.0对Cp,m与温度进行多元线性回归.结果表明:氯原子取代模式对PCPQ化合物的扭角A(C4-C9-C10-C5)有很大的影响;与此同时,Cp,m与T,T-1和T-2之间有着很好的相关性(r2=1.00).     

Electrical Conductivity of Liquid Crystal Mixtures with Induced Smectic Phases

The electrical conductivity of the two liquid crystal mixtures N-(4-ethoxybenzylidene)-4′-amino benzonitrile (PEBAB)/4,4′-di-n-hexyloxy-azoxybenze (HEXOAB) and 4-n-heptyloxy-4′-cyanobiphenyl (7 CBP)/HEXOAB, which exhibit induced smectic A phases is investigated. In the smectic phases, the conductivity anisotropy of the PEBAB/HEXOAB mixtures is negative at the lowest PEBAB concentrations; this behaviour is usually expected for a smectic layer structure. With increasing PEBAB concentration the anisotropy increases and becomes positive. Possibly, this is an indication for a growing double layer structure, which was observed in polar smectic phases. In the nematic phases the conductivity anisotropy of the pure HEXOAB is considerably reduced by adding a relatively small amount of the polar component. An addition of 10 mole% 7 CBP reduces the anisotropy ratio of the electrical conductivity to V = K_∥/K ₁ ≈ 0.2, which probably is the lowest value observed in a nematic phase so far. Besides the negative conductivity anisotropy, these mixtures also exhibit a positive anisotropy of the dielectric constant. They thus fulfil the conditions for inverse dynamic scattering.     

Large‐area Ag nanorod array substrates for SERS: AAO template‐assisted fabrication,functionalization, and application in detection PCBs

Highly ordered arrays of thiolated β‐cyclodextrin (HS‐β‐CD) functionalized Ag‐nanorods (Ag‐NRs) with plasmonic antennae enhancement of electrical field have been achieved for encapsulation and rapid detection of polychlorinated biphenyls (PCBs). The large‐area ordered arrays of rigid Ag‐NRs supported on copper base were fabricated via porous anodic aluminum oxide (AAO) template‐assisted electrochemical deposition. The inter‐nanorod gaps between the neighboring Ag‐NRs were tuned to sub‐10 nm by thinning the pore‐wall thickness of the AAO template using diluted H₃PO₄. The nearly perfect large‐area ordered arrays of Ag‐NRs supported on copper base render these systems excellent in surface‐enhanced Raman scattering (SERS) performance with uniform electric field enhancement, as testified by the SERS spectra and Raman mappings of rhodamine 6 G. Furthermore, the Ag‐NRs were functionalized with HS‐β‐CD molecules so as to capture the apolar PCB molecules in the hydrophobic cavity of the CD. Compared to the ordinary undecorated SERS substrates, the HS‐β‐CD modified Ag‐NR arrays exhibit better capture ability and higher sensitivity in rapid detection of PCBs. Copyright © 2012 John Wiley & Sons, Ltd.     

杭州市冬季大气气溶胶PM2.5中二恶英和多氯联苯的污染特征

2014年1月在杭州市选择5个点位采集大气颗粒物PM_2.5样品,采用同位素稀释高分辨气相色谱/高分辨质谱测定PM_2.5中的二恶英（PCDD/Fs）和多氯联苯（PCBs）,对PM_2.5的污染状况以及PM_2.5中PCDD/Fs和PCBs的污染水平及分布特征进行了研究。PM_2.5的质量浓度范围为85~168 μg/m³,PM_2.5污染较重,但与2004年同期相比明显降低。PM_2.5中PCDD/Fs的毒性当量（TEQ）为0.277~0.488 pg I-TEQ/m³,明显高于2004年同期采集样品。颗粒物中PCDD/Fs以八氯代二苯并-对-二恶英（OCDD）为主,毒性当量主要贡献者为2,3,4,7,8-五氯代二苯并呋喃（2,3,4,7,8-PeCDF）。PM_2.5中PCBs的质量浓度范围为2.9~8.1 pg/m³,二恶英类多氯联苯（DL-PCBs）的毒性当量范围为2.6~6.1 fg WHO-TEQ/m³,污染较低。PCBs在颗粒物中分布以PCB-28为主,但对毒性当量贡献最大的为PCB-126。PCDD/Fs和PCBs的气-固分配特征表现为PCDD/Fs主要分布于颗粒物中,而PCBs主要分布于气相中。     

贻贝中有机氯农药和多氯联苯标准物质的研制及同位素稀释高分辨质谱法定值

建立了贻贝中有机氯农药(OCPs)和多氯联苯(PCBs)标准物质的研制和定值方法,该研究对我国开展环境生物标准物质的研制具有重要的方法学借鉴价值。该标准物质样品为采自大连湾海域的贻贝,其定值目标物包括18种OCPs和16种PCBs,采用的定值测量方法是目前世界上最权威、最准确的同位素稀释-高分辨气相色谱/高分辨质谱联用法(ID-HRGC/HRMS)。所研制的标准物质具有定值目标物种类多、不确定度较小(约10%)等特点。该标准物质是目前国际上唯一一种采用同位素稀释高分辨质谱法进行定值的底栖生物中OCPs标准物质,于2012年3月通过了国家一级标准物质的终审,并于2012年6月被国家质量监督检验检疫总局批准为国家一级标准物质(GBW10069)。该标准物质可用于食品安全控制、环境监测、质量检测等领域相关分析方法的评价、测量质量控制及技术仲裁检验等。     

电拓扑状态预测多氯二苯并噻吩及噻吩砜化合物的气相色谱保留指数

以原子类型电拓扑状态指数(ETSI)有效表征了135 个多氯二苯并噻吩(PCDT)和135 个多氯二苯并噻吩砜(PCDTO₂)的分子结构, 应用基于预测的变量选择与模型化(VSMP)方法建立PCDT 和PCDTO₂ 化合物在DB-5 气相色谱柱上的气相色谱保留指数(RI)与分子结构(ETSI)的定量相关模型, 模型的相关系数r² 分别为0.9939 和0.9729, LOO 交叉验证相关系数 q² 分别为0.9921 和0.9692. 为验证模型稳定性和预测能力, 应用17 个PCDT 和PCDTO₂ 训练集样本构建的QSRR 模型的r² 分别为0.9959 和0.9783, LOO 交叉验证相关系数 q² 分别为0.9921 和0.9740, 说明模型具有良好的稳定性. 以此模型预测外部8 个检验集及110 个预测集的RI 值, 8 个检验集样本的结果表明训练集模型具有良好预测能力.     

凝胶渗透色谱和固相萃取净化-气相色谱分离组合法测定糙米中的残留农药

提出糙米中38种有机氯农药、拟除虫菊酯和多氯联苯残留量的同时测定方法。用乙酸乙酯提取,凝胶渗透色谱和固相萃取净化,气相色谱．电子俘获检测,外标法定量。3个添加水平的平均回收率分别为77．3、81．4和83．8％;相对标准偏差3．8％～13．9％。有机氯农药和多氯联苯检出限为0．07μg／kg;拟除虫菊酯的检出限为0．4μg／kg。检测方法简便省时,自动化程度高,稳定可靠。     

Comparative Study on Thermodynamic Properties and Stabilities of Polychloro-phenazines and Polychlorinated Dibenzo-p-dioxin

The thermodynamic properties and molecular volumes （Vm） of 76 polychlorophenazines （PCPZs） have been calculated at the B3LYP/6-31G^＊ level by using density functional theory. The isodesmic reactions were designed to calculate standard enthalpy of formation （△fH^θ） and standard free energy of formation （△fG^θ） of PCPZ congeners. According to the relative magnitude of their △fG^θ, the order of relative stability of PCPZ congeners was theoretically proposed. Comparing the results with those of polychlorinated dibenzo-p-dioxin （PCDD） isomers, it was found that S^θ, △fH^θ, △fG^θ, Vm and the order of relative stability of PCPZ congeners were quite similar to those of PCDDs.     

气相色谱-负化学电离源质谱法测定鱼油中16种多氯联苯

建立了气相色谱-负化学电离源质谱(GC-NCI-MS)同时测定鱼油中16种多氯联苯(PCBs)的方法。鱼油样品经正己烷提取和浓硫酸净化,在选择离子监测模式下进行GC-NCI-MS检测。所检测的PCBs在0.01~10 μg/L范围内呈现良好的线性关系(r>0.99),定量限(S/N=10)在3~67 pg/g之间。基质加标回收率为62.3%~121.8%,相对标准偏差(n=3)≤12%。相比传统的多种填料固相萃取前处理法,本方法样品处理简单快速,有机溶剂使用量少,具有较好的抗基质干扰能力和较高的灵敏度,适用于鱼油中痕量共平面多氯联苯及常见指示性多氯联苯等的同时检测。     

Mesostructured cellular foam solid‐phase microextraction coating for the highly sensitive recognition of polychlorinated biphenyls in water samples

We herein presented a mesoporous cellular foam solid‐phase microextraction coating that showed highly sensitive recognition for weakly polarity polychlorinated biphenyls in water samples. The mesoporous cellular foam coater fiber was for the first time prepared by a simple sol‐gel method. The main experimental parameters including extraction temperature, extraction time, desorption time, stirring rate, and ionic strength were investigated by high‐efficiency orthogonal array design, a L₁₆ (4⁴) matrix was applied for the identification of optimized extraction parameters, and the optimized method was successfully applied to the analysis of environmental water sample. The novel mesoporous cellular foam coated fibers exhibited sensitive limits of detection (0.07–0.28 µg/L), wide linearity (5–3000 µg/L), and good reproducibility (3.5–8.3% for single fiber, and 4.9–8.7% for fiber‐to‐fiber) for polychlorinated biphenyls. The home‐made coating was successfully used in the analysis of polychlorinated biphenyls in real environmental water samples. These results indicate that the synthesized mesoporous cellular foams are promising materials for adsorption and separation applications in sample pretreatment.