气相色谱-质谱联用测定苯乙烯中的阻聚剂对叔丁基邻苯二酚

 建立了气相 质谱联用 (GC/MS)测定苯乙烯中阻聚剂对叔丁基邻苯二酚含量的方法。苯乙烯样品直接进样 ,通过毛细管柱 (HP 1,30m× 0 32mmi.d .× 0 2 5 μm)分离 ,由电子轰击 (EI)源于选择离子监测 (SIM)模式下进行检测。结果表明 ,对叔丁基邻苯二酚含量在 5mg/kg～ 5 0mg/kg时线性关系良好 (r2 =0 9987) ,回收率高 ;与美国材料测试标准ASTMD4 5 90中的分光光度测量法比较具有操作简捷、准确度高的特点。     

P and H NMR studies of the transesterification polymerization of polyphosphonate oligomers

Polymeric phosphonate esters are an interesting class of organophosphorus polymers because both the polymer backbone and phosphorus substituents can be modified. These polymers have been prepared by ring-opening polymerizations of cyclic phosphites, stoichiometric polycondensations of dimethyl phosphonate with diols in conjunction with diazomethane treatment and by transesterification of polyphosphonate oligomers. Our initial attempts to prepare high molecular weight polymeric phosphonate esters by the transesterification methods were unsuccessful. Results indicate that the reactions of dimethyl phosphonate with diols to form polyphosphonate oligomers with only methyl phosphonate end groups are plagued by a serious side reaction that forms phosphonic acid end groups. These end groups do not participate in the transesterification reaction and limit the molecular weights of the polymers that can be obtained. The phosphonic acid end groups can be converted into reactive methyl phosphonate end groups by treatment with diazomethane, however diazomethane is explosive and the polymerization is slow. An alternative route for the production of high molecular weight polymers is the transesterification of the 1,12-bis(methyl phosphonato)dodecane, formed by the reaction of excess dimethyl phosphonate and 1,12-dodecanediol, with a Na₂CO₃ promoter. This allows polymers with molecular weights of up to 4.5×10⁴ to be prepared, and no phosphonic acid end groups are observed in these polymers. Thermal analyses of the poly(1,12-dodecamethylene phosphonate) have shown that this polymer has reasonable thermal stability (onset of thermal decomposition at 273 °C). This polymer also undergoes a cold crystallization process at 15 °C similar to that which has been observed in some polyesters, polyamides and elastomers.     

Synthesis of PI-88 analogue using novel O-glycosidation of exo-methylenesugars

Acid-promoted α-stereoselective O-glycosidation of 1-exo-methylenesugars was successfully applied to the synthesis of a PI-88 analogue. By using methanesulfonic acid as a promoter, 1′-C-methyl-α-disaccharides with p-methoxybenzyl protection were obtained in high yield. The sequence of selective deprotection and glycosidation provided 1-C-methyl-pentasaccharide efficiently.     

密胺-脲甲醛树脂合成工艺放大研究

以密胺－脲甲醛树脂合成的小试工艺条件为依据，完成了放大试验过程的工艺研究。研究结果与小试研究的工艺条件相吻合。     

Adsorptive passivation of iron by organic acid anions

Studies on the iron passivation by organic acid anions in aqueous solutions are briefly reviewed. It is shown that the passivation can be caused only by their adsorption, retarding both the iron dissolution and the formation of oxide films. Earlier, it had been believed that oxide films play a dominant role in the iron passivation in neutral solutions. The recent viewpoint is that such nonoxide iron passivation can occur in solutions of salts of not only aromatic amino acids (sodium phenylantranilate and its substitutes), but other carboxylic acids as well. An important role of chemisorption and hydrophobic properties of anions for the formation of adsorption passive films is emphasized. New possibilities for inhibitor protection of iron against corrosion, which is based on adsorptive passivation, are pointed out.Translated from Elektrokhimiya, Vol. 40, No. 12, 2004, pp. 1503–1507.Original Russian Text Copyright © 2004 by Kuznetsov.     

A free energy calculation study of the effect of H-->F substitution on binding affinity in ligand-antibody interactions

Changes in binding affinity to catalytic antibody 6D9 of chloramphenicol phosphonate derivatives (CPDs) containing H or F were investigated by performing free energy calculations based on molecular dynamics simulations. We calculated the binding free energy, enthalpy, and entropy changes (DeltaDeltaG, DeltaDeltaH, and -TDeltaDeltaS) attributable to H-->F substitution by comparing results for CPDs containing a trifluoroacetylamino group (CPD-F) or an acetylamino group (CPD-H). The calculated DeltaDeltaG, DeltaDeltaH, and -TDeltaDeltaS values were -2.9, -6.3, and 3.5 kcal mol(-1) and close to experimental values observed for a series of similar ligands, chloramphenicol phosphonates with F and H (-1.4, -3.5, and 2.1 kcal mol(-1)). Therefore, CPD-F binds more strongly to 6D9 than does CPD-H. To clarify the origin of the large difference in DeltaDeltaG, we apportioned the calculated values of DeltaDeltaG and DeltaG for the associated and dissociated states into contributions from various atomic interactions. We found that the H-->F substitution increased the binding affinity mainly by decreasing the hydration free energy and not by increasing favorable interactions with the antibody. The decreased hydration free energy of the ligand was mainly due to unfavorable coulombic interactions between the trifluoroacetylamino group and solvent waters, which increased the free energy of the dissociated state (by about 3.7 kcal mol(-1)). Also, the trifluoroacetylamino group slightly increased the free energy level of the associated state (about 0.8 kcal mol(-1)) because favorable van der Waals interactions compensated for unfavorable coulombic interactions with antibody atoms. In addition, the enthalpy and entropy changes, DeltaDeltaH and -TDeltaDeltaS (computationally -6.3 and 3.5 kcal mol(-1)), originated mainly from a decrease in hydration free energy in the dissociated state. The CPD-F and CPD-H ligands had substantially different structures in the dissociated and complexed states.     

Efficient routes to optically active azido-, amino-, di-azido- and di-amino-cyclitols with chiro- and allo-configuration from myo-inositol

Efficient routes to hitherto unknown 1d-2,5-di-azido-di-deoxy-allo-inositol, 1d-2,5-di-amino-di-deoxy-allo-inositol, 1l-1-azido-1-deoxy-chiro-inositol and 1l-1-amino-1-deoxy-chiro-inositol were developed by using cheaply available myo-inositol as the starting material. Preliminary investigations on the enzyme inhibitory properties were done. The methodology reported is amenable to gram scale synthesis and thus can find application in natural product synthesis.     

The isolation, structural determination, and total synthesis of terfestatin A, a novel auxin signaling inhibitor from Streptomyces sp.

Indole 3-acetic acid, a plant hormone auxin, regulates every aspects of plant growth and development. In the screening for specific inhibitors on auxin signaling using the transgenic Arabidopsis plant harboring the auxin-responsive reporter gene, terfestain A was found to be a novel inhibitor of auxin signaling from the culture of Streptomyces sp. F40. The structure of terfestatin A was determined to be p-terphenyl β-glucoside on the basis of spectroscopic analyses, chemical degradation, and total synthesis.     

Absolute stereochemistries and total synthesis of (+)-arisugacins A and B, potent, orally bioactive and selective inhibitors of acetylcholinesterase

In the current studies, we used the Kakisawa-Kashman modification of the Mosher NMR method to determine the complete absolute stereochemistry of arisugacins. We also report the convergent total synthesis of (+)-arisugacins A and B by a sequence including (i) ruthenium complex-catalyzed asymmetric reduction of the cyclohexenone derivative; (ii) stereoselective construction of the arisugacin skeleton by a Knoevenagel-type reaction of an α,β-unsaturated aldehyde derivative with production of a 4-hydroxy-2-pyrone derivative as a key reaction; and (iii) stereoselective dihydroxylation to give the diol derivative, followed by deoxygenation. Accordingly, we defined the absolute structures of arisugacins A and B as 4a-(R),6a-(R),12a-(R), and 12b-(S). Finally, we characterized the bioactivities of the synthetic intermediates to understand the structure-activity relationships of the arisugacins.     

大型液相色谱分离过程FAD－SMT数学模型及其数值解

提出大型液相色谱分离过程ＦＡＤ－ＳＭＴ数学模型，把色谱分离连续性方程转变为对流扩散方程和常微分方程组，并提出模型的数值方法，分析了数值解的稳定条件和收敛条件以及空间和时间步长的选取。实验结果表明，ＦＡＤ－ＳＭＴ数学模型计算的液相色谱分离葡萄糖、果糖和分离甘露醇、山梨醇理论与实验流出曲线相吻合。灵敏度分析结果表明：相平衡常数比轴向扩散系数和总传质系数对色谱分离有较大的影响。