Ion chromatography–inductively coupled plasma mass spectrometry determination of arsenic species in marine samples

Arsenic speciation analysis in marine samples was performed using ion chromatography (IC) with inductively coupled plasma mass spectrometry (ICP‐MS) detection. The separation of eight arsenic species, viz. arsenite, monomethyl arsonic acid, dimethylarsinic acid, arsenate, arsenobetaine, tetramethylarsine oxide, arsenocholine and tetramethylarsonium ion was achieved on a Dionex AS4A (weaker anion exchange column) by using a nitric acid pH gradient eluent (pH 3.3 to 1.3). The entire separation was accomplished in 12 min. The detection limits for the eight arsenic species by IC–ICP‐MS were in the range 0.03–1.6 µ g l^?1, based on 3σ of the blank response (n = 6). The repeatability and day‐to‐day reproducibility were calculated to be less than 10% (residual standard deviation) for all eight species. The method was validated by analyzing a certified reference material (DORM‐2, dogfish muscle) and then successfully applied to several marine samples, e.g. oyster, fish muscle, shrimp and marine algae. The low power microwave digestion was employed for the extraction of arsenic from seafood products. Copyright © 2004 John Wiley & Sons, Ltd.     

Reaction of SbPO4 with lithium in non-aqueous electrochemical cells: preliminary study and evaluation of its electrochemical performance in anodes for lithium ion batteries

SbPO₄, a phosphate with a layered structure, was tested as an electrode material for lithium cells spanning the 3.0-0.0 V range. Two main electrochemical processes were detected as extensive plateaus at ca. 1.6 and 0.7 V in galvanostatic measurements. The first process was found to be irreversible, thus excluding a potential intercalation-like mechanism for the reaction and being better interpreted as a decomposition reaction leading to the formation of elemental Sb. This precludes the use of this compound as a cathodic material for lithium cells. By contrast, the process at 0.7 V is reversible and can be ascribed to the formation of lithium-antimony alloys. The best electrochemical response was obtained by cycling the cell at a C/20 discharge rate over the voltage range 1.25-0.25 V. Under these conditions, the cell delivers an average capacity of 165 Ah/kg—a value greater than those reported for other phosphates—upon successive cycling.     

高剥离类镁等电子序列的磁偶极M1和电四极E2光谱跃迁理论研究

利用全相对论性多组态Dirac-Fock广义平均能级方法，系统地计算了类镁离子3s3p磁偶极Ml^3P2--^3P1和电四极E2 ^2P2--^3P0(Z=20-103)光谱跃迁的能级间隔、跃迁几率和振子强度。计算中考虑了原子核的有限体积效应，进行了高阶Breit修正和QED修正，所得到的能级间隔和最近的实验数据及理论计算值进行了比较。计算结果表明：高原子序数的高荷电离子的磁偶极矩M1和电四极矩E2跃迁几率和中性原子的电偶极E1的相当，在ICF和MCF高温激光等离子体中，磁偶极矩M1和电四极矩E2跃迁过程不容被忽视。     

Heavy metal ion uptake properties of polystyrene-supported chelating polymer resins

Metal ion uptake properties of polystyrene-supported chelating polymer resins functionalized with (i) glycine, (ii) hydroxy benzoic acid, (iii) Schiff base and (iv) diethanol amine have been investigated. The effects of pH, time and initial concentration on the uptake of metal ions have been studied. The uptake of metal ion depends on pH. The resins are more selective at pH 10 for Pb(II) and Hg(II), whereas at pH 6 they are found to be Cd(II) and Cr(VI) selective. Metal ion uptake properties of resins follow Freundlich’s equation. The resins are recyclable and are therefore employed for the removal of heavy metal pollutants from industrial waste water.     

若干具有[(PO4)2Mo5O15]簇骼的化合物的光谱研究

本文对所合成的具有 [(PO4 ) 2 Mo5O1 5]簇骼的 3种新颖的有机 磷钼酸盐簇合物(NH3CH2 CH2 NH3) 2 5[(PO4 ) (HPO4 )Mo5O1 5]·7 5H2 O (Ⅰ ) ,(H3NCH2 CH2 NH3) 3·[(PO4 ) 2 Mo5O1 5]·3H2 O (Ⅱ )和(H3NCH2 CH2 NH3) 2 ·[Cu(en) ][(PO4 ) 2 Mo5O1 5]·5H2 O (Ⅲ )用FTIR ,NIR Raman ,紫外 可见漫反射光谱 (UV VisDRS)和荧光光谱等研究手段 ,对其进行光谱研究 ,探讨其结构和性能的关系。在这些化合物中 ,化合物Ⅰ和Ⅱ具有孤立的 [(PO4 ) 2 Mo5O1 5]簇骼基元 ,而化合物Ⅲ的 [(PO4 ) 2 Mo5O1 5]簇骼基元是由 [Cuen]基团桥联成链 ;磷钼酸盐的特征振动频率和这些化合物的结构相关 ;UV VisDRS显示 ,在 2 0 0和 2 6 0nm左右有两个杂多化合物的特征吸收谱带 ;化合物的稳态荧光光谱中 ,观察到以 2 4 0nm激发 ,在大约 4 0 0nm附近出现的由金属氧簇Oμ→Mo跃迁激发所引起的较强的发射峰 ,在化合物 (Ⅲ )中 ,还观察到通过 [Cuen]的荷移跃迁的以 5 70nm激发所产生的 6 0 4nm的发射峰。     

Self-organized amorphous material in silicon (0 0 1) by focused ion beam (FIB) system

A method using a focused ion beam (FIB) to prepare a silicon amorphous material is presented. The method involves the redeposition of sputtered material generated during the interaction of the Ga⁺ ion beam with a silicon substrate material. The shape and dimensions of this amorphous material are self-organized and reproducible. The stability of this amorphous material under electron irradiation was investigated in the transmission electron microscopy (TEM). Electron irradiation can induce recrystallization of the amorphous material, resulting in the lateral and vertical growth, starting at an amorphous-crystalline interface, of polysilicon containing defects.     

SHI induced modification in CR-39 polycarbonate by positron annihilation lifetime studies

CR-39 is a polycarbonate widely used as SSNTD for recording nuclear charged particles and in other applications. Latent ion tracks produced in the polymers due to the damage produced by the passage of Swift Heavy Ions contain amorphous material with highest degree of disorder, changing the free volume properties which have strong correlation with the macroscopic properties of the material. Positron annihilation lifetime spectroscopy (PALS) provides direct information about the dimension, content and hole size distribution of free volume in polymers. The effect of irradiation of ⁴⁰Ar (14.9 MeV/n) ions on CR-39 polycarbonate by Positron Annihilation Lifetime Spectroscopy (PALS) is reported here. PALS provides a non-destructive and non-interfering probe, having high detection efficiency for free volume hole properties. From o-Ps lifetime mean free volume hole radius and average free volume of the micro-voids have been calculated. PAL measurement shows an increase in free volume on irradiation.     

淋洗液发生器离子色谱抑制电导法测定甜味剂

采用淋洗液发生器阴离子交换-抑制电导检测法,同时分离和检测阿思巴甜、甜蜜素、安赛蜜和糖精4种常见的甜味剂.由于采用了淋洗液发生器,使背景电导大大降低,可以实现甜味剂的高灵敏度检测和分离.该方法具有良好的重现性、线性关系和较低的检测限.阿思巴甜、甜蜜素、安赛蜜和糖精的检测限分别是:1.27、0.045、0.033、0.063 mg/L;样品测定的回收率分别为99.7%、102.8%、98.6%、103.5%.     

Determination of Hydrogen Single Ion Activity Coefficients in Aqueous HCl Solutions at 25°C

The single ion activity coefficients of hydrogen and chloride ions in aqueous HCl solutions have been estimated at 25°C at concentrations up to 1 mol-kg^–1, using potentiometric measurements with ion-selective electrodes and appropriate calibration procedures. Two methods are described for an internal calibration of the electrodes in the extended Debye–Hückel concentration range. The results are compared to the conventional pH calibration with external buffer solutions. Since the latter calibration method does not account for the liquid junction potential E _J which arises at the reference electrode, the resulting activity coefficients are quite different in HCl solutions of higher concentration. These differences between internal and external calibration decrease significantly, when a correction for E _J is introduced into the conventional pH calibration. Hence, in solutions of higher ionic strength the accuracy of the conventional pH electrode calibration using buffer solutions is very limited, when exact H⁺ activities are required. The consistency of the results indicates that the liquid junction potentials in the examined systems calculated by the Henderson/Bates approximation are of reasonable precision.     

Structures and syntheses of layered and framework amine-bearing uranyl phosphate and uranyl arsenates

Two hydrated uranyl arsenates and a uranyl phosphate were synthesized by hydrothermal methods in the presence of amine structure-directing agents and their structures determined: (N₂C₆H₁₄)[(UO₂)(AsO₄)]₂(H₂O)₃, DabcoUAs, {NH(C₂H₅)₃}[(UO₂)₂(AsO₄)(AsO₃OH)], TriethUAs, and (N₂C₄H₁₂)(UO₂)[(UO₂)(PO₄)]₄(H₂O)₂, PiperUP. Intensity data were collected at room temperature using MoKα X-radiation and a CCD-based area detector. The crystal structures were refined by full-matrix least-squares techniques on the basis of F² to agreement indices (DabcoUAs, TriethUAs, PiperUP) wR₂=5.6%, 8.3%, 7.2% for all data, and R₁=2.9%, 3.3%, 4.0%, calculated for 1777, 5822, 9119 unique observed reflections (|F_o|?4σ_F), respectively. DabcoUAs is monoclinic, space group C2/m, Z=2, a=18.581(1), b=7.1897(4), c=7.1909(4) Å, β=102.886(1)°, V=936.43(9) Å³, D_calc=3.50 g/cm³. TriethUAs is monoclinic, space group P2₁/n, Z=4, a=9.6359(4), b=18.4678(7), c=10.0708(4) Å, β=92.282(1)°, V=1790.7(1) Å³, D_calc=3.41 g/cm³. PiperUP is monoclinic, space group Pn, Z=2, a=9.3278(4), b=15.5529(7), c=9.6474(5) Å, β=93.266(1)°, V=1397.3(1) Å³, D_calc=4.41 g/cm³. The structure of DabcoUAs contains the autunite-type sheet formed by the sharing of vertices between uranyl square bipyramids and arsenate tetrahedra. The triethylenediammonium cations are located in the interlayer along with two H₂O groups and are disordered. Both TriethUAs and PiperUP contain sheets formed of uranyl pentagonal bipyramids and tetrahedra (arsenate and phosphate, respectively) with the uranophane sheet-anion topology. In TriethUAs, triethlyammonium cations are located in the interlayer. In PiperUP, the sheets are connected by a uranyl pentagonal bipyramid that shares corners with phosphate tetrahedra of adjacent sheets, resulting in a framework with piperazinium cations and H₂O groups in the cavities of the structure.