中酯化度果胶离子络合复合物凝胶对葡萄糖迁移的影响

通过控制中酯化度果胶多糖溶液pH、多价离子浓度以及对凝胶-溶胶温度曲线的测定,研究其凝胶敏感特性和可逆性能.利用中酯化度果胶多糖的凝胶特性,以体外模拟实验研究不同凝聚态多糖体系中葡萄糖的生成和迁移行为.结果表明:中酯化度果胶多糖具有酸敏感、多价离子敏感等凝胶特性,且其凝胶具有温度可逆性.在降低葡萄糖迁移速率和降低淀粉生成葡萄糖速率两方面,中酯化度果胶钙凝胶体系效果较其他体系明显,并且使生成葡萄糖呈均化释放.     

Differential fragmentation patterns of pectin oligogalacturonides observed by nanoelectrospray quadrupole ion-trap mass spectrometry using automated spectra interpretation

Oligogalacturonides of different degrees of polymerization (DP) and methyl esterification (DE) were structurally analyzed by nanoESI quadrupole ion-trap mass spectrometry. The fragmentation patterns of the oligogalacturonides were compared using the program 'Virtual Expert Mass Spectrometrist' (VEMS) for structural annotation. In the analyzed oligogalacturonides of lower DP, the generation of C/Y ions, i.e. ions retaining the glycosidic oxygen, was higher than that of B/Z ions. In general, with oligogalacturonides of higher DP, the B/Z ions were generated more abundantly. Oligogalacturonides with free carboxylic acid groups underwent higher water loss compared to fully methyl-esterified oligogalacturonides under the same fragmentation conditions. Cross-ring cleavage, in which fragmentation occurs across the ring system of the galacturonate residue and signified by unique mass losses, was observed to be higher in fully methyl-esterified oligogalacturonides than in non-methyl-esterified ones. This study demonstrates the different fragmentation patterns of oligogalacturonides as influenced by the presence or absence of methyl ester groups. For a detailed analysis of unknown oligogalacturonides, cross-ring fragmentation gives more structural information than glycosidic bond cleavage. One implication of this is that more structural information is obtained when analyzing methyl-esterified oligogalacturonides than non-methyl-esterified ones in an ion-trap instrument. This is of particular importance in pectin chemistry, where mass spectrometry has become the technique of choice for structural determination. Although this study was not designed to explain the mechanisms of oligogalacturonide fragmentation, possible explanations for why non-methyl-esterified oligogalacturonides undergo more water loss than methyl-esterified ones will be postulated. In addition, the VEMS program was extended to automatically interpret and assign the fragment ions peaks generated in this study.     

Volatile Compounds of Lemon and Grapefruit IntegroPectin

An HS-SPME GC-MS analysis of the volatile compounds adsorbed at the outer surface of lemon and grapefruit pectins obtained via the hydrodynamic cavitation of industrial waste streams of lemon and grapefruit peels in water suggests important new findings en route to understanding the powerful and broad biological activity of these new pectic materials. In agreement with the ultralow degree of esterification of these pectins, the high amount of highly bioactive α-terpineol and terpinen-4-ol points to limonene (and linalool) decomposition catalyzed by residual citric acid in the citrus waste peel residue of the juice industrial production.     

Budesonide-Loaded Pectin/Polyacrylamide Hydrogel for Sustained Delivery: Fabrication,Characterization and In Vitro Release Kinetics

A single ulcerative colitis (UC) is a chronic inflammatory bowel disease (IBD) that causes inflammation of the colonic mucosa at the distal colon and rectum. The mainstay therapy involves anti-inflammatory immunosuppression based on the disease location and severity. The disadvantages of using systemic corticosteroids for UC treatment is the amplified risk of malignancies and infections. Therefore, topical treatments are safer as they have fewer systemic side effects due to less systemic exposure. In this context, pH sensitive and enzymatically triggered hydrogel of pectin (PC) and polyacrylamide (PAM) has been developed to facilitate colon-targeted delivery of budesonide (BUD) for the treatment of UC. The hydrogels were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), swelling ratio, and drug release. FT-IR spectroscopy confirmed the grafting as well loading of BUD in hydrogel. XRD showed the amorphous nature of hydrogel and increment in crystallinity after drug loading. On the other hand, SEM showed that the hydrogels exhibited a highly porous morphology, which is suitable for drug loading and also demonstrated a pH-responsive swelling behaviour, with decreased swelling in acidic media. The in-vitro release of BUD from the hydrogel exhibited a sustained release behaviour with non-ficken diffusion mechanism. The model that fitted best for BUD released was the Higuchi kinetic model. It was concluded that enzyme/pH dual-sensitive hydrogels are an effective colon-targeted delivery system for UC.     

Effects of ascorbic acid on the physiochemical,rheological, and antioxidant properties of citrus essential oil-based emulsion stabilized by pectin

The present study was conducted to enhance the peel of Citrus sinensis (sweet orange) by using their essential oils (EOs) as a potential source of natural bioactive molecules. EOs were obtained by hydrodistillation and their chemical profile was determined through GC-MS analysis. O/W EO emulsions were prepared using pectin as biopolymer emulsifier at different proportions, including different amounts of ascorbic acid (0, 0.5, and 1% w/w). The effect of pectin and ascorbic acid concentrations on the stability and rheological behavior of emulsions was investigated. It was found that adding ascorbic acid to the appropriate concentration of pectin enhances the interfacial membranes surrounding the oil droplets and decreases the droplet sizes. As a result both the viscoelastic modules and the resulting viscosity of emulsions increase leading to an improvement of their stability. Antioxidant activity of orange EO emulsion in combination with ascorbic acid was found significantly higher than that without ascorbic acid, and higher than that of individual components. Overall, this study would be helpful in developing more effectives systems with promising physical and antioxidant characteristics for the preservation of foods.     

向日葵盘果胶对碳钢的缓蚀性能研究

以向日葵盘为原料,利用纤维素酶制备果胶(SFP)。采用静态失重、极化曲线和交流阻抗技术研究SFP在1mol/L HCl及0.5mol/L H_2SO_4溶液中对碳钢的缓蚀性能,并探讨其在碳钢表面的吸附机理。结果表明,缓蚀效率随SFP浓度增大而增大,随温度升高而降低。在HCl和H_2SO_4溶液中,SFP的吸附方式分别服从Langmuir和Temkin等温式,属于物理吸附;极化曲线测试显示SFP是一种混合型缓蚀剂。本文的研究表明,向日葵盘果胶是碳钢的绿色高效缓蚀剂,且在HCl溶液中的缓蚀性能优于在H_2SO_4溶液中。     

Chemical evaluation of seeded fruit biomass of oil pumpkin (<Emphasis Type="Italic">Cucurbita pepo</Emphasis> L. var. <Emphasis Type="Italic">Styriaca</Emphasis>)

Oil pumpkin (Cucurbita pepo L. var. Styriaca) is an economically important horticultural plant cultivated for oil production. After harvesting seeds, the residual biomass has a limited application and is usually left in the field. An experimental study was performed to evaluate the chemical composition of the seeded fruit oil pumpkin biomass (OP) dried by solvent-exchange using ethanol. The sugar composition of polysaccharides obtained by sequential extraction with water and dilute alkali indicated the prevalence of pectic polysaccharides. Hemicelulloses were released in higher amounts in the alkaline step. The chemical composition of OP and its individual tissues (peel, flesh and hairy flesh) was investigated and compared to the corresponding preparations of standard pumpkin (SP, Cucurbita pepo L.). The content of components (on oven-dry basis), calculated from the analysis data of the individual tissues, was estimated for OP: 7.9 % ash, 7.6 % Klason lignin, 19.3 % pectin (as uronic acids), 34.1 % neutral carbohydrates, and 27.4 % α-cellulose and for SP: 6.4 % ash, 4.0 % Klason lignin, 20.9% pectin (as uronic acids), 38.1% neutral carbohydrates, and 29.2 % α-cellulose, respectively. The OP biomass showed a higher proportion of hemicelluloses.     

Release of electrolytes from W/O/W double emulsions stabilized by a soluble complex of modified pectin and whey protein isolate

W/O/W double emulsions (DEs) stabilized by charged soluble complexes of whey protein isolate (WPI) and modified pectins were investigated in relation to their stability and the release of two types of electrolytes, NaCl and sodium ascorbate.WPI alone cannot properly stabilize the DEs. The droplet size is relatively large (100 μm) and increases with time. However, addition of modified pectin to form a soluble complex with WPI significantly improved the stability.DEs prepared with two types of oils (medium chain triglycerides (MCT) and R(+)-limonene) were studied by measuring droplet size, creaming, viscosity, and electrolyte release. Irrespective of their very different oil phase nature, both emulsions were stable against coalescence, but R(+)-limonene formed smaller droplets (25 μm) than MCT (35 μm). The electrolyte release rate was significantly higher from the R(+)-limonene that formed DEs with much lower viscosity. R(+)-limonene-DE released 75% of the NaCl after 28 days, while MCT-DE released only 50%. NaCl was released more slowly than sodium ascorbate.Apparently, the release mechanism from R(+)-limonene-DE was found to be “thinning the outer interface and release of the entire inner droplets” while it seems that the release from MCT-DE was slower and “diffusion controlled”.DEs stabilized by WPI/C63 released 12% of the sodium ascorbate after 1 day in milk and remained stable for at least 8 days. However, DEs stabilized with only WPI released about 50% of the sodium ascorbate after 1 day, and phase separated after 8 days.     

不同栽培方式对笋瓜（印度南瓜）果实中主要品质指标质量比的影响

以‘龙圆栗香’为试材,采用地爬式和架式两种种植方式,利用单干、双干和三干3种整枝方式,研究不同栽培方式对笋瓜果实中果胶、戊糖和铬（Cr3＋）3种主要品质指标质量比的影响.结果表明：两种种植方式下三干整枝方式均不利于果实中果胶和戊糖的积累,地爬式栽培比架式栽培有利于果实中铬（Cr3＋）的积累;地爬式栽培双干整枝处理下果实内果胶质量比最高.可采用架式单干整枝处理方式来提高单位面积笋瓜果实中果胶、铬（Cr3＋）和戊糖的产量.     

Bioactive Pectin-Murta (Ugni molinae T.) Seed Extract Films Reinforced with Chitin Fibers

This study investigated the biocomposite pectin films enriched with murta (Ugni molinae T.) seed polyphenolic extract and reinforced by chitin nanofiber. The structural, morphological, mechanical, barrier, colorimetric, and antioxidant activity of films were evaluated. The obtained data clearly demonstrated that the addition of murta seed extract and the high load of chitin nanofibers (50%) provided more cohesive and dense morphology of films and improved the mechanical resistance and water vapor barrier in comparison to the control pectin film. The antioxidant activity ranged between 71% and 86%, depending on the film formulation and concentration of chitin nanofibers. The presented results highlight the potential use of chitin nanofibers and murta seed extract in the pectin matrix to be applied in functional food coatings and packaging, as a sustainable solution.