Thermal and chemical nanofractal relaxation

We studied shape relaxation of nano-fractal islands, during annealing, after their growth from antimony cluster deposition on graphite surface. Annealing at 180^°C shows evidence of an increase of the fractal branch width with time followed by branch fragmentation, without changing the fractal dimension. The time evolution of the width of the arm suggests the surface self-diffusion mechanism as the main relaxation process. With Monte Carlo simulations, we confirmed the observed behavior. Comparison is done with our previous results on fragmentation of nano-fractal silver islands when impurity added to the incident cluster promotes rapid fragmentation by surface self-diffusion enhancement [1].     

Spectral Properties of Thioflavin T and Its Complexes with Amyloid Fibrils

Comparative analysis of the absorption and fluorescence spectra and fluorescence excitation spectra of thioflavin T (ThT) in various solvents and in the composition of amyloid fibrils has shown that ThT, when excited in the region of the long-wavelength absorption band, fluoresces in the spectral region with a maximum at 478–484 nm. The appearance in aqueous and alcohol solutions of a fluorescence band with a maximum near 440 nm has been attributed to the presence in the composition of the ThT preparations of an impurity with an absorption band in the 340–350-nm range. The literature data showing that in glycerol ThT has a wide fluorescence spectrum with two maxima are due to the artifact connected with the use of a high concentration of the dye. It has been suggested that the cause of the low quantum yield of ThT aqueous and alcohol solutions is the breakage of the system of conjugated bonds due to the reorientation of the benzothiozole and benzaminic rings of ThT in the excited state with respect to one another. The main factor determining the high quantum yield of fluorescence of ThT incorporated in fibrils is the steric restriction of the rotation of the rings about one another under these conditions. The suggestions made have been verified by the quantum-chemical calculation of the ThT molecule geometry in the ground and excited states.     

A comparative study on the interaction between tin(II) porphyrin and selected group 8B metals for potential application as reduction catalysts

We study the interaction between tin(II) porphyrin (SnPor) with platinum and non-precious Group 8B metals (iron, cobalt and nickel) by density functional theory and discuss the electronic properties of the resulting products. We also model the interaction of the resulting compounds with water where applicable. Our studies indicate that, SnPor-Ni possesses electronic properties similar to SnPor-Pt, suggesting that it may possess similar photocatalytic properties for reduction reactions, such as converting water to hydrogen gas.     

新型高色纯度弱电流猝灭性蓝色有机发光器件

以ADN为基质,分别以不同掺杂剂制备了四种蓝色有机发光器件,器件结构为:CuPc(12 nm)/NPB(40 nm)/AND∶Dopant(50 nm)/Alq(12 nm)/LiF(4 nm)/Al。掺杂剂有:BCzVB(amino-substituted distyrylarylenederivatives)、TBPe、BCzVBi和DSA-ph四种。研究了最佳掺杂浓度以及器件的亮度、电流密度、效率和色坐标等电学特性和光学特性。其中掺杂BCzVB制备了色纯度高、低电流猝灭性的蓝色有机发光器件,色坐标达到x=0.146,y=0.162,最大亮度为11600 cd/m2(15 V),电流效率为2.8 cd/A,流明效率为1.79 lm/W;以ADN为基质,分别以TBPe、BCzVBi和DSA-ph为掺杂剂,制备了另外三种对比器件。器件ADN∶TBPe色坐标为x=0.162,y=0.222(蓝绿光),效率随电流的增加而降低很快;器件ADN∶BczVBi有较好的色纯度(色坐标:x=0.164,y=0.146),但电流效率较低:2.03 cd/A,效率随电流的增加降低幅度也较快。器件ADN∶DSA-ph效率较高为8 cd/A,效率随电流增加变化幅度不大,但色纯度比较差(x=0.153,y=0.306),适合于做白色有机发光器件。     

X-ray metrology for advanced silicon processes

X-ray reflectivity (XRR), X-ray fluorescence (XRF) and small angle X-ray scattering (SAXS) techniques are used to the monitoring of Cu/porous low κ processes, which are developed for the next generation (≤65 nm) integrated circuits. Sensitivity of XRR and XRF is sufficient to detect drifts of the copper barrier layer, copper seed layer and Cu CMP (chemical-mechanical polishing) processes. Their metrology key parameters comply with production requirements. SAXS allows determining the pore structure of low κ films: average pore size and pore size distribution.     

Nanophotonics and nanometrology with planar X-ray waveguide-resonator

The mechanism of X-ray waveguide-resonance propagation or the radiation superstream model, which can become the ground of X-ray nanophotonics, is discussed briefly. Some attention is devoted to features consideration of the simplest devices characterized by the waveguide-resonance transportation of X-ray beams. The experimental data showing the user possibilities of a simplest waveguide-resonators application for diffractometry are presented. We discuss the main reasons to improve the metrological characteristics for total reflection X-ray fluorescence (TXRF) analytical method in case when the target exciting beam is formed by a waveguide-resonator. Some problems appearing during the waveguide-resonator application are formulated.     

CBP/Alq3有机量子阱结构的光致发光

采用多源有机分子气相沉积系统(OMBD)制备了CBP/Alq₃有机多量子阱结构,利用电化学循环伏安特性和吸收光谱、小角X射线衍射、荧光光谱研究了量子阱的能带、结构和光致发光的特性。电化学循环伏安特性和吸收光谱的测量结果表明,CBP的最低占据分子轨道(LUMO)与最高占据分子轨道(HOMO)的位置分别为-2.74,-6.00eV,Alq₃的LUMO与HOMO的位置分别为-3.10,-5.80eV,所以CBP/Alq₃有机量子阱为Ⅰ型量子阱结构。小角X衍射测量显示,在小角的位置(2θ的范围在0°～3°)观察到了对应于量子阱结构的多级布拉格衍射峰,表明多层量子阱结构是有序的层状结构,界面比较完整,界面质量比较好。荧光光谱的研究结果表明,Ⅰ型量子阱结构可以有效地把能量从垒层传递给阱层,从而增强了阱层材料的发光。阱层的厚度对发光峰的位置影响很大,随阱层厚度减小,阱层材料的发光峰出现蓝移现象。并对引起发光峰蓝移的原因进行了讨论。     

Homogeneous immunoassays

Applied Biochemistry and Biotechnology -