La détection infrarouge avec les plans focaux non refroidis : état de l'artUncooled focal plane infrared detectors: the state of the art

The emergence of uncooled detectors has opened new opportunities for IR detection for both military and commercial applications. Development of such devices involves a lot of trade-offs between the different parameters that define the technological stack. These trade-offs explain the number of different architectures that are under worldwide development. The key factor is to find a high sensitivity and low noise thermometer material compatible with silicon technology in order to achieve high thermal isolation in the smallest area as possible. Ferroelectric thermometer based hybrid technology and electrical resistive thermometer based (microbolometer) technology are under development. LETI and ULIS have chosen from the very beginning to develop first a monolithic microbolometer technology fully compatible with commercially available CMOS technology and secondly amorphous silicon based thermometer. This silicon approach has the greatest potential for reducing infrared detector manufacturing cost. After the development of the technology, the transfer to industrial facilities has been performed in a short period of time and the production is now ramping up with ULIS team in new facilities. LETI and ULIS are now working to facilitate the IRFPA integration into equipment in order to address a very large market. Achievement of this goal needs the development of smart sensors with on-chip advanced functions and the decrease of manufacturing cost of IRFPA by decreasing the pixel pitch and simplifying the vacuum package. We present in this paper the technology developed by CEA/LETI and its improvement for being able to designs 384×288 and 160×120 arrays with a pitch of 35 μm. Thermographic application needs high stability infrared detector with a precise determination of the amount of absorbed infrared flux. Hence, infrared detector with internal temperature stabilized shield has been developed and characterized. These results will be presented. To cite this article: J.-L. Tissot, C. R. Physique 4 (2003).     

In situ 2-D piezoelectric wafer active sensors arrays for guided wave damage detection

This paper presented development work of an in situ method for damage detection in thin-wall structures using embedded two-dimensional ultrasonic phased arrays. Piezoelectric wafer active sensors were used to generate and receive guided Lamb waves propagating in the plate-like structure. The development of a generic beamforming algorithm that does not require parallel ray assumption through using full wave propagation paths is described. A virtual beam steering method and device, the embedded ultrasonic structural radar, was implemented as a signal post-processing procedure. Several two-dimensional configurations were investigated and compared with beamforming simulation. Finally, rectangular shape arrays were developed for verifying the generic formulas and omnidirectionality. The rectangular arrays yield good directionality within the 360° full range and are able to detect damage anywhere in the entire plate.     

Phase-locking observed among high-order lateral modes of a broad-stripe diode array inside an external cavity

For a laser diode array (LDA) positioned in an external cavity of a certain length, a very strong inter-emitter coupling can be established between the off-axis lateral modes of the broad-stripe emitters. Under these circumstances, the phase-locked operation of the LDA due to couplings between off-axis modes of emitters has been observed, for the first time to our knowledge. The observations suggest that phase locking of a broad-stripe LDA can be achieved among different emitter lateral modes by selecting different cavity lengths.     

A realization of digital wireless transmission for MRI signals based on 802.11b

In this paper, a digital wireless transmission system based on 802.11b standard for magnetic resonance imaging (MRI) application is designed and built for the first time to eliminate the interference aroused by coil array cables. The analysis shows that the wireless receiver has a very high sensitivity to detect MRI signals. The modulation technique of differential quadrature phase shift keyed (DQPSK) can be applied to MRI data transmission with rate of 2 Mbps and bandwidth of 2 MHz. The bench test verifies that this wireless link has a dynamic range over 86 dB supporting up to 3 T MRI system data transmission. The 2D spin echo imaging of phantom is performed and the SNR of the image obtained by the wireless transmission can be comparable with that got by the coaxial cables.     

LOM and HOM damping study in a superconducting deflecting cavity for ALS at LBNL

Superconducting deflecting cavities can be used in synchrotron light source to generate subpicosecond X-ray pulses while the impedance of the lower order modes (LOM) and higher order modes (HOM) in the cavity should be kept below an accepted level to avoid beam instability. These modes can be damped by adding waveguide on beam pipe. Detailed simulation of Q in CST Microwave Studio is introduced and experiment results on an aluminum model cavity with damping waveguide are reported to make a comparison.     

Effect of Co substitution on the magnetic properties of BiFeO3

Bismuth ferrite is doped with a dilute concentration of cobalt, _{BiFe1−XCoXO3}${\mathrm{BiFe}}_{1-X}{\mathrm{Co}}_X{\mathrm{O}}_3$; X=0, 0.01, 0.02 is prepared by sol-gel auto combustion technique. X-ray diffraction data refined via Reitveld method shows single phase and shrinkage in cell volume for Co doped BiFeO₃. Various magnetic ground states viz. superparamagnetic, glassy antiferromagnetic and glassy ferrimagnetic behavior is observed for X=0, 0.01, 0.02, respectively. A first-order magnetic transition is observed in the Arrott plot data of cobalt doped BiFeO₃. Possibility of thermally induced magnetic transition is also seen in the magnetization data of cobalt doped BiFeO₃. A model based on the existing spinoidal cyclic arrangement of spins is proposed to explain the observed data. Finally, a very dilute concentration of Co⁺³${\mathrm{Co}}^{+3}$ in BiFeO₃ is found sufficient to tailor the magnetic properties.     

An eigen-based high-order expansion basis for structured spectral elements

We present an eigen-based high-order expansion basis for the spectral element approach with structured elements. The new basis exhibits a numerical efficiency significantly superior, in terms of the conditioning of coefficient matrices and the number of iterations to convergence for the conjugate gradient solver, to the commonly-used Jacobi polynomial-based expansion basis. This basis results in extremely sparse mass matrices, and it is very amenable to the diagonal preconditioning. Ample numerical experiments demonstrate that with the new basis and a simple diagonal preconditioner the number of conjugate gradient iterations to convergence has essentially no dependence or only a very weak dependence on the element order. The expansion bases are constructed by a tensor product of a set of special one-dimensional (1D) basis functions. The 1D interior modes are constructed such that the interior mass and stiffness matrices are simultaneously diagonal and have identical condition numbers. The 1D vertex modes are constructed to be orthogonal to all the interior modes. The performance of the new basis has been investigated and compared with other expansion bases.     

基于无限纠缠投影对态(iPEPS)算法的二维XYX模型的量子相变

运用无限纠缠投影对态(iPEPS)表示的张量网络(TN)算法,任意选取初态对二维无限正方格子XYX量子模型进行数值模拟演化,从而得到两个不同的具有简并对称破缺的基态波函数。在二维XYX量子模型中,既可以运用普适序参量的性质,又可以运用约化密度矩阵保真度的分叉行为,来确定这个系统由自发对称性破缺引起的量子相变的临界点及量子相变的类型。即基于iPEPS算法,从普适序参量和约化密度矩阵保真度的角度,来刻画二维XYX量子多体系统的相变,其为典型的Ising普适类的二级相变。因而,运用iPEPS算法通过普适序参量和约化密度矩阵保真度,可以确定一个量子系统经历的量子相变,这为研究热力学极限下的强关联电子量子系统的量子相变和量子临界现象提供了一种更有效的强大的工具。     

Generalized structure of higher order nonclassicality

A generalized notion of higher order nonclassicality (in terms of higher order moments) is introduced. Under this generalized framework of higher order nonclassicality, conditions of higher order squeezing and higher order subpoissonian photon statistics are derived. A simpler form of the Hong-Mandel higher order squeezing criterion is derived under this framework by using an operator ordering theorem introduced by us in [A. Pathak, J. Phys. A 33 (2000) 5607]. It is also generalized for multi-photon Bose operators of Brandt and Greenberg. Similarly, condition for higher order subpoissonian photon statistics is derived by normal ordering of higher powers of number operator. Further, with the help of simple density matrices, it is shown that the higher order antibunching (HOA) and higher order subpoissonian photon statistics (HOSPS) are not the manifestation of the same phenomenon and consequently it is incorrect to use the condition of HOA as a test of HOSPS. It is also shown that the HOA and HOSPS may exist even in absence of the corresponding lower order phenomenon. Binomial state, nonlinear first order excited squeezed state (NLESS) and nonlinear vacuum squeezed state (NLVSS) are used as examples of quantum state and it is shown that these states may show higher order nonclassical characteristics. It is observed that the Binomial state which is always antibunched, is not always higher order squeezed and NLVSS which shows higher order squeezing does not show HOSPS and HOA. The opposite is observed in NLESS and consequently it is established that the HOSPS and HOS are two independent signatures of higher order nonclassicality.