Intersubband transitions in Al0.82In0.18N/GaN single quantum well

The influence of the width of a lattice-matched Al_0.82In_0.18N/GaN single quantum well (SQW) on the absorption coefficients and wavelength of the intersubband transition (ISBT) has been investigated by solving the Schrödinger and Poisson equations self-consistently. The wavelength of 1—2 ISBT increases with L, the thickness of the single quantum well, ranging from 2.88 μm to 3.59 μm. The absorption coefficients of 1—2 ISBT increase with L at first and then decrease with L, with a maximum when L is equal to 2.6 nm. The wavelength of 1—3 ISBT decreases with L at first and then increases with L, with a minimum when L is equal to 4 nm, ranging from approximately 2.03 μm to near 2.11 μm. The absorption coefficients of 1—3 ISBT decrease with L. The results indicate that mid-infrared can be realized by the Al_0.82In_0.18N/GaN SQW. In addition, the wavelength and absorption coefficients of ISBT can be adjusted by changing the width of the SQW.     

Theoretical analysis of aggregation in block‐copolymer films: The optical signature

We focus this work on the theoretical investigation of the block‐copolymer poly[oxyoctyleneoxy‐(2,6‐dimethoxy‐1,4phenylene‐1,2‐ethinylene‐phenanthrene‐2,4diyl) named as LaPPS19, recently proposed for optoelectronic applications. We used for that a variety of methods, from molecular mechanics to quantum semiempirical techniques (AM1, ZINDO/S‐CIS). Our results show that as expected isolated LaPPS19 chains present relevant electron localization over the phenanthrene group. We found, however, that LaPPS19 could assemble in a π‐stacked form, leading to impressive interchain interaction; the stacking induces electronic delocalization between neighbor chains and introduces new states below the phenanthrene‐related absorption; these results allowed us to associate the red‐shift of the absorption edge, seen in the experimental results, to spontaneous π‐stack aggregation of the chains. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

热丝化学气相沉积技术低温制备多晶硅薄膜的结构与光电特性

以金属W和Ta为热丝，采用热丝化学气相沉积 ，在250℃玻璃衬底上沉积多晶硅薄膜.研究了热丝温度、沉积气压、热丝与衬底间距等沉积参数对硅薄膜结构和光电特性的影响，在优化条件下获得晶态比X_c＞90%，暗电导率σ_d=10^-7—10-6Ω ^-1cm^-1，激活能E_a=0.5eV，光能隙E_opt≤1.3 eV的多晶硅薄膜. 关键词： 多晶硅薄膜 热丝化学气相沉积 光电特性     

Method of Self-Mixing in the Spectroscopy of Quasielastically Scattered Laser Radiation

Interaction of a semiconductor laser with its self-radiation quasielastically scattered in the environment is considered. It is established that at small coefficients of coupling of the laser with the scattering medium the spectral density of the power of an optoelectronic signal in the laser faithfully reproduces the shape of the scattered-radiation spectrum at the Doppler-shift frequencies. This makes it possible to measure the spectrum with a resolution characteristic for optical homodynation by recording the optoelectronic signal.     

一种基于微波谐振测量Sagnac效应的新方案

目前光学陀螺的主要工作原理是Sagnac效应, 如何提高Sagnac效应的测量精度是提高陀螺精度的一个重要研究课题. 传统的光学陀螺利用光短波长的特性来提高检测精度. 但考虑到微波的相位(频率)检测精度远高于光波的相位(频率)检测精度, 如果能够利用微波实现Sagnac效应的检测, 就能得到比光学陀螺更高的检测精度, 从而为实现高精度的微波陀螺提供了可能. 利用基于光电振荡器的光载微波结构实现了微波Sagnac效应的检测. 实验结果证明了微波检测Sagnac效应的可行性, 为将来实现高精度的微波谐振陀螺打下基础.     

光电振荡器产生宽带混沌光的时延特征分析

理论分析与数值研究了光电振荡器输出的混沌激光特性, 基于自相关分析方法, 详细研究了光电振荡器的直流偏置相移和反馈强度等工作参数对输出信号时延信息的影响. 数值研究表明: 增加反馈强度可以使时延信息变得更加微弱甚至消除; 相同条件下, 直流偏置相移对应的工作点越接近马赫-曾德尔调制器传输特性曲线的极值点, 时延信息越弱; 直流偏置相移为0时可以有效地抑制时延信息. 研究还发现, 当直流偏置相移和反馈调制产生的相移变化π/2时, 自相关曲线上对应于延迟时间处的相关系数符号发生变化. 关键词： 宽带混沌激光 延迟时间 光电振荡器     

光电经纬仪动力学模型分析

从动量定理和动量矩定理两方面分析光电经纬仪动力学特性，建立光电经纬仪的非线性动力学模型。结合某型号光电经纬仪的具体参数对模型进行了分析。     

视觉模式识别网络及光电实现

在形态学网络及改进的Ｈａｍｍｉｎｇ网络基础上，提出视觉模式识别网络及训练算法，形态学网络作为特征提取网络，具有相对图像平移和尺度不变的特性，改进的Ｈａｍｍｉｎｇ网络加速完成特征矢量的分类操作。经过学习的视觉模式识别网络，可完成图像特征的提取，实现相对于图像平移和尺度不变的模式识别，在此基础上，建立了光电视觉模式识别体系，从而实现实时模式识别。     

第一讲光电子器件在光纤通信中的应用

光纤通信技术发展的阶段性飞跃总是伴随新型光电材料和功能器件的突破．文章介绍了光纤通信系统中应用到的各种光电子器件，从光纤通信的3个环节：光发送、光接受、光放大为出发点，着重阐述了半导体激光器、光调制器、光检测器、光放大器等关键器件的基本原理、工作特性以及发展现状和趋势，并在回顾传统集成光电子器件发展的同时，展望了以新一代微纳结构光电子器件为基础的光子集成技术的发展趋势。     

Optical-digital processors for morphological and rank order filtering

Non-linear rank order and morphological filtering can be achieved in optical-digital processors. In these processors, all convolutions are performed in inherently parallel optical correlators. Arithmetic and logic operations are made digitally. Due to the threshold decomposition concept, grey scale images are sequentially treated slice by slice. The optical-digital method of local histogram calculation within both binary and weighted neighbourhoods allows local non-linear operations. We derive rank order and morphological filters from optically calculated convolutions. Several configurations of optical convolvers are discussed. Further improvements in the technology of spatial light modulators and encoded light sources are needed before these processors' practical uses will appear.