氧化铽团簇的表面修饰及对其荧光特性影响的研究

采用脉冲激光轰击浸于流动相中的氧化铽固体靶，考察了流动相及其流速、脉冲激光输出功率、修饰剂、添加修饰剂顺序等对所获得的氧化铽有机溶胶荧光性能的影响。UV-Vis和荧光光谱的测试表明：以含有修饰剂的无水乙醇作为流动相，可得到良好荧光性能的氧化铽乙醇溶胶，而环己酮与醋酸乙酯均不适合作为该体系的流动相;最佳流速为0.15 mL·s^-1；脉冲激光输出功率大有利于其荧光性能；最佳修饰剂为乙酰丙酮(acac)和2，2′-联吡啶(2，2′-bipy)，且应原位修饰。     

氯化镍催化的醚的酰化开裂反应

在某些金属盐存在下,醚可与酰氯反应生成酯,早期文献中对于此类反应曾有过报道,其中所用的金属盐有三氯化铁或氯化锌,其相对用量较大,酯的得率较差。其后,Alper等提出用第五族金属羰基化合物和酰氯,如Mo(CO)_4-RCOCl为试剂,进行醚的开裂;近期则有Pri-Bar等用Pd(Ⅱ)-R_3SnX-     

金属铝燃料电池的研究

铝是一种丰富廉价的有色金属，金属铝电池作为一种新型燃料电池，具有低成本、无毒害、高功率、高能量密度等优点。本文简述了金属铝电池的工作原理，并对铝阳极、空气阴极、催化剂、电解液和铝燃料电池的应用等方面的研究概况进行了叙述。     

Crystal Structure and Characterization of a Large Polyoxotungstate (NH4)21{La(H2O)5[Ni(H2O)]2As4W40O140}·53H2O

The heteropolytungstate (NH4)₂₁{La(H₂O)₅[Ni(H₂O)]₂As₄W₄₀O₁₄₀}·53H₂O is obtained by the reaction of Na₂₇[NaAs₄W₄₀O₁₄₀]· 60H₂O with NiCl₂·6H₂O, La(NO₃)₃·6H₂O and NH₄Cl at pH‐4.5. The structure and chemical composition are determined by X‐ray diffraction analysis and elemental analysis. The crystal data and main structure refinement are a = 1.9551(3) nm, b = 2.4156(4) nm, c= 3.7068(6) nm, β = 91.505(3)°, V = 17.500 (5) nm³, monoclinic crystal system with space group P2₁/n, Z = 4, R₁ = 0.0573, wR₂ = 0.0717 [I >2<s?(I)], R₁, = 0.2463 and wR₂ = 0.1199 (all data). [La(H₂O)₅] {Ni(H₂O)}₂AS₄W₄₀O₁₄₀ has C₂, symmetry. IR spectra of the ligand [NaAs₄W₄₀O₁₄₀]^27‐ and its three complexes were discussed.     

Preparation of Tin Oxide-Based Metal Oxide Particles

Tin oxide-doped hybrid particles were prepared by a wet chemical process with organic-inorganic (phenyl/silica) hybrid particles in an alcoholic solution. The phenyl/silica hybrid particles, with a diameter of ca. 790 nm were used as a new support material for tin oxide (SnO₂) particles from tin(IV) chloride. The surface of the particles was modified via nitration of aromatic groups in the particles, to promote formation of the tin oxide coating on the particles. The thickness and surface morphology of the tin oxide layer coated on the nitrated-phenyl/silica hybrid particles could be controlled by varying the tin(IV) chloride concentration and reaction time. The size and morphology of the resultant particles were investigated with field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The particles obtained were also characterised by infrared (FTIR) and solid-state ¹³C magic angle spinning nuclear magnetic resonance (¹³C-CP/MAS NMR) spectroscopy. The effect of processing parameters on the crystallinity and structure of the doped hybrids were confirmed by X-ray diffraction (XRD) patterns.     

A ONE-STEP SURFACE MODIFICATION PROCEDURE TO PEG-GRAFTED NANO-TITANIA

PEG （Polyethylene Glycol）-grafted nano-titania has been obtained in a one-step procedure using hexamethylene diisocyanate as the coupling agent and dibutyltin dilaurate as the catalyst in toluene at 80℃ and characterized qualitatively by FTIR and quantitatively by elemental analysis and thermogravimetric analysis. A comparison of nano-titania with two other commonly used inorganic nanoparticles, nano-silica and nano-alumina, is made, revealing that reactivity order is nano- silica 〉 nano-alumina 〉 nano-titania in view of PEG grafting. Possible mechanism of PEG grafting is also discussed.     

Ni-SDC固体氧化物燃料电池阳极的合成和性质

采用柠檬酸-硝酸盐溶胶-凝胶低温自蔓延燃烧法制备氧化镍（NiO）粉末和Ce0.8Sm0.2O1.9（SDC）粉末，并将NiO与SDC按不同质量比和不同制备工艺制备了固体氧化物燃料电池（SOFC）的阳极前身。再用自组装的还原装置将其在820℃经2．5h还原后，采用四端子法测量其电导率值。分析了阳极片电导率与阳极片微结构、Ni的质量百分数、混合研磨时间及烧结温度之间的关系。结果显示，阳极片的电导率强烈依赖于镍含量和制备工艺。     

壳聚糖固体聚合物电池用膜

壳聚糖是甲壳素脱乙酰基的产物，具有良好的成膜性、生物相容性、环保以及价格低廉等特点。作为一种碱性高分子膜材料，近年来已成为聚电解质研究领域中的研究热点。本文综述了壳聚糖固体聚合物电池用膜的研究现状，其改性工艺主要包括共混、化学改性、质子酸掺杂、无机盐掺杂等方法，比较了各种工艺处理后壳聚糖固体聚合物电解质膜的性能差异，并就壳聚糖固体聚合物电解质膜中离子传导机理中有待解决的问题进行探讨，并提出了进一步改进壳聚糖固体聚合物电解质膜性能的研究思路。     

微量元素镍概论

阐述了镍的基本概况,包括镍的发现史、来源及性质,镍对人体健康的影响,科学补镍和防止镍中毒的方法。     

苯丙氨酸改性树枝状聚赖氨酸的合成及表征

以双芴甲氧羰基赖氨酸(Di- Fmoc -Lysine)为支化单元采用固相多肽合成技术制备了一种树枝状聚赖氨酸.该聚合物表面活性氨基通过与芴甲氧羰基苯丙氨酸(Fmoc- Phe)反应获得表面完全替代的苯丙氨酸改性树枝状聚赖氨酸.产物的分子量和结构经MS和NMR进行了表征.研究结果表明,利用该方法得到的产物分子量单一,是一种潜在的理想非病毒治疗载体.