A Branched Pore Model Analysis for the Adsorption of Acid Dyes on Activated Carbon

A new branched-pore adsorption model has been developed using an external mass transfer coefficient, K _f, an effective diffusivity, D _eff, a lumped micropore diffusion rate parameter, K _b, and the fraction of macropores, f, to describe sorption kinetic data from initial adsorbent-adsorbate contact to the long-term adsorption phase. This model has been applied to an environmental pollution problem—the removal of two dyes, Acid Blue 80 (AB80) and Acid Red 114 (AR114), by sorption on activated carbon. A computer program has been used to generate theoretical concentration-time curves and the four mass transfer kinetic parameters adjusted so that the model achieves a close fit to the experimental data. The best fit values of the parameters have been determined for different initial dye concentrations and carbon masses. Since the model is specifically applicable to fixed constant values of these four parameters, a further and key application of this project is to see if single constant values of these parameters can be used to describe all the experimental concentration-time decay curves for one dye-carbon system.The error analysis and best fit approach to modeling the decay curves for both dye systems show that the correlation between experimental and theoretical data is good for the fixed values of the four fitted parameters. A significantly better fit of the model predictions is obtained when K _f, K _b and f are maintained constant but D _eff is varied. This indicates that the surface diffusivity may vary as a function of surface coverage.     

采用多光程长建模方法检测血液成分含量

为了提高近红外光谱血液成分含量分析模型的预测精度,利用多个光程长(optical path length,OPL)共同参与建模的方法进行血糖等6种血液成分的定量分析。通过微米位移机构实现不同光程长血液光谱的测量,由全自动生化分析仪给出生化成分分析结果,并出具化验单。采用偏最小二乘法(PLS2)进行血液的近红外光谱建模及预测。由于血液光谱存在显著的非线性特征,不同光程长的血液样本的等效吸收系数不同,同一波长不同光程长(0.20~1.25 mm)测得的血液光谱互不相关。主动把非线性特性作为一种测量手段引入,不再利用单个的最佳光程长建模,而是用各个血液组分对应的多个最佳光程长的近红外光谱同时参与建立校正模型,进行血液成分的分析预测。研究结果表明,多光程长建模方法用于血液成分含量分析,可提高血液成分校正模型的预测精度。     

油溶性偶氮染料的合成及其性能研究

随着染料在现代科技中的广泛应用,染料的油溶性也日益受到人们的重视.如:非线性光学材料、激光盘光学信息存贮材料中使用的染料、彩色成像中的油溶性影像染料等,对染料在有机溶剂中的溶解度都有很高的要求.偶氮染料是有机染料中的主要类型,但目前对其分子结构与油溶性关系的研究甚少.本文合成了一类黄色偶氮染料(见表1),并对其色光、油溶性等性能进行了测试,发现取代基相对于偶氮基的位置,是影响偶氮染料油溶性的主要因素.     

菲林B近红外分光光度法测定维生素C

在pH 3的三氯乙酸酸性介质中,菲林B可以定量地将还原型维生素C氧化成脱氢型维生素C,利用脱氢型维生素C在920 nm处有最大吸光度,测定其含量,建立了一种测定维生素C的新方法,并研究了影响反应的各种因素。该方法对维生素C的检出限为0.17 mg/L;线性范围为0.5~10 mg/L,对水果中维生素C含量测定的RSD<2.31%;回收率为99.7%~101.1%,比2,4-二硝基苯肼分光光度法测定结果的相对偏差<±1.6%。     

Effects of type of adsorption isotherms on parallel diffusion of sulfonated dyes into porous cellulose membrane

Transport phenomenon of three sulfonated azo dyes, C.I. Acid Red 88, C.I. Direct Yellow 12, and C.I. Direct Blue 15 into water-swollen cellulose membranes has been analyzed on the basis of parallel transport theory by surface and pore diffusion. Langmuir equation was applied into the mass balance equation to estimate dye concentration in the pores. The results were compared with the results obtained by applying Freundlich equation in our previous papers. The surface diffusivity (D _s) and the pore diffusivity (D _p) for the parallel diffusion model obtained by applying Langmuir equation agreed with those obtained by applying Freudlich equation. The theoretical concentration profiles for parallel diffusion calculated usingD _s andD _p coincided accurately with the experimental data when we applied either Langmuir or Freundlich equations.     

Progress on phthalocyanine-conjugated Ag and Au nanoparticles: Synthesis,characterization, and photo-physicochemical properties

Phthalocyanine (Pc) complexes are an important class of dyes with numerous (e.g., biological, photophysical, and analytical) applications. Among the methods used to improve the properties of these complexes, one should mention the introduction of different substituents, variation of the central metal ion, ligand exchange, and conjugation to nanomaterials (e.g., carbon-based nanomaterials and metal nanoparticles (NPs)). This work briefly reviews Pc complex conjugation to Ag and Au NPs, highlights the different NP shapes, and discusses the diversity of conjugation approaches. Moreover, the use of UV–Vis spectroscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, atomic force microscopy, dynamic light scattering and Fourier transform infrared spectroscopy to characterize Pc-NP hybrids is summarized. The effect of conjugation on Pc photo-physicochemical properties (fluorescence, singlet oxygen generation, triplet state formation, and optical limiting behavior) is discussed, and future perspectives for the synthesis and applications of new hybrids are provided.     

Photovoltaic and spectral properties of tetraphenyloporphyrin and metallotetraphenyloporphyrin dyes

Spectroscopical properties and photocurrent (or photovoltage) of tetraphenyloporphyrins and metallotetraphenyloporphyrins in nematic liquid crystal have been studied. Photoelectric response has been measured in an electrochemical cell made of the semitransparent semiconducting and golden electrodes with porphyrin dyes embedded in liquid crystal. Fluorescence, time-resolved luminescence in microsecond time scale and photoacoustic spectra have also been measured. The competition between radiative, non-radiative processes and charge transfer is discussed. It has been shown that effectivity of porphyrins for photocurrent generation depends on the presence/absence of central metal in the macrocycle of porphyrin skeleton and the kind of metal. The schematic model of the contributions of the dye molecule and semiconducting electrode in the electron transfer process is shown.     

Liquid-liquid extraction of copper (I) and copper (II) as ion-paired complexes with acyclic 2-thienyl-containing polythioether and triphenylmethane dye anion

Three acyclic polythioethers containing 2-thienyl units at both ends were synthesized and the effect of substituent on the extraction of copper(II) was studied. The methyl groups in the terminal thiophene ring have imparted an appreciable degree of increase in the percent extraction of copper(II), while the introduction of chlorine atoms into the 2-thienyl unit resulted in the reverse effect. Among the counter dye anions examined, tetrabromophenolphthalein ethylester was the best one for copper(II) extraction. The composition of extracted species was evaluated to be 122 (Cu(II)/polythioether/dye anion). Quantitative extraction of copper(I) was attained as complexes with various triphenylmethane dyes, i.e., bromocresol green, bromothymol blue, bromo-phenol blue and pyrogallol red. Copper(I) in organic phase was completely back-extracted with 2 mole/l sulfuric acid containing 10% hydrogen peroxide.     

Excition dynamics in the J-aggregates of a carbocyanine dye

We report on the exciton dynamics in the J-aggregating dye 5,5, 6,6-tetrachloro-1,1-diethyl-3,3-di(4-sulfobutyl)-benzimidazolocarbocyanine which is known readily to form J-aggregates, even at room temperature and at a low concentration. We performed a series of time-correlated singlephoton-counting experiments at different emission wavelengths and at different temperatures in the range between 1.5 and 125 K. Additionally, the temperature dependence of the relative fluorescence quantum yield was determined.