Solid-state polyamidation of hexamethylenediammonium adipate. II. The influence of acid catalysts

Loss of diamine and distinct transition phenomena from the solid to the melt state restrain solid-state polymerization (SSP) of nylon salts from industrial application. To depress these phenomena temperatures well below the melting point of the starting material are employed, resulting however in low reaction rates. The need to use catalysts arises and accordingly in this study hexamethylenediammonium adipate (HMA) particles were polymerized containing a strictly controlled amount of uniformly distributed catalyst. The catalysts included boric, sulphuric, and phosphoric acids with boric acid being the most effective in accelerating the reaction while eliminating the tendency to agglomeration. In general, catalyst concentration up to a critical value plays a considerable role in the overall behavior. Furthermore, in agreement with non catalytic processes, the reaction temperature remains an influential parameter. © 1994 John Wiley & Sons, Inc.     

Crosslinked poly(ethylene oxide) modified with tetraalkylammonium salts as phase transfer catalyst

Radiation crosslinked poly(ethylene oxide)s (PEO) modified with two tetraalkylammonium salts: allyldimethyldodecylammonium bromide and ethylmethacrylate dimethyldodecylammonium bromide were prepared. They have been characterized by elemental analysis, IR, ¹H-NMR spectra, and DSC measurements. Their activity as phase transfer catalysts (PTC) in the model displacement reaction of 1-bromooctane with aqueous sodium cyanide were studied. The reaction kinetics were followed under pseudo-first-order conditions. Small amounts of onium salt inserted into the PEO network gave rise to a five time increase in the rate constant. The recovered catalysts could be re-used without loss of activity. © 1995 John Wiley & Sons, Inc.     

Promoting effect of Pt in Ni-based catalysts for CH4 reforming

The effect of Pt/Ni ratio on the surface properties and catalytic behavior of bimetallic PtNi catalysts for reforming of methane with CO₂ was studied. The TPR, FTIR of adsorbed CO and XPS data showed that introduction of a small amount of Pt (0.3 – 0.5 wt.%) into the Ni catalyst leads to a decrease of the NiO size, its easy reduction and a uniform distribution of the nickel metal particles.     

Influence of quaternary onium salts,crown ethers and cryptands on olefin epoxidations promoted by HOCl/ClO− in the Presence of Mn(III)-tetrakis(2,6-dichlorophenyl)porphyrin chloride

Reaction rates of alkene epoxidations, promoted by aqueous NaOCl and catalyzed by Mn(III)-tetrakis(2,6-dichlorophenyl)porphyrin chloride1 (P) in the presence of a lipophilic axial ligand (L) (e.g.N-hexylimidazole) and carried out under H₂O/CH₂Cl₂ two phase conditions at 0°C, are strongly enhanced by lowering the pH of the aqueous phase from 12.7 to 9.5. Under these conditions, a further relevant increase in the reaction rates can be achieved by adding phase-transfer catalysts (PT), e.g. quaternary ammonium salt 3, lipophilic crown ether4 or cryptand5, provided that the amount of L is very small (L/P=1 for very reactive alkenes, e.g. cyclooctene, and 10 for poorly reactive ones, e.g. 1-dodecene). In the case of cyclooctene epoxidation, the use of 0.006–0.03 mol. equiv. of PT completes the reaction in 1–10 min., the initial rates being up to 600 turnovers/min. with (2.2.2,C₁₀) cryptand. In the absence of the axial ligand, the quaternary ammonium salt3 and cryptand5 show an inhibitory effect. Such an effect is due to the formation of the poorly reactive Mn(P)CI species, by Cl– extraction to the organic phase. However, dibenzo crown ether 4 does not show this effect. In the presence of 4, and with L/P =1, the 1-dodecene epoxidation reaches 94% in 1 min. The unique behavior of crown ethers can be explained by their ineffectiveness in extracting alkali chlorides, providing a very low concentration of Cl– in the organic phase and thus avoiding the Mn(III)-porphyrin deactivation.This paper is dedicated to the memory of the late Dr C. J. Pedersen.     

Synthesis and transformations of metallocycles. 9. Regioselective and stereoselective synthesis of al-substitutedtrans-3,4-dialkylaluminocyclopentanes catalyzed by (η5-C5H5)2ZrCl2

A new stereoselective method is developed for the synthesis of 1-chloro-, 1-alkoxy-, and 1-N,N-dialkylaminoalumino-cyclopentanes from -olefins, metallic magnesium, and aluminum halides (AlCl₃, RO-AlCl₂, R₂N-AlCl₂) in the presence of catalytic amounts of Cp₂ZrCl₂ (Cp=⁵-C₅H₅). The products from hydrolysis and deuterolysis of the Al-substituted 3,4-dialkylaluminocyclopentanes (ACP) have the threo configuration.For Communication 8, see [1].Institute of Organic Chemistry, Urals Branch, Russian Academy of Sciences, 450054 Ufa. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 6, pp. 1393–1397, June, 1992.     

Stoichiometric and catalytic methods of asymmetric synthesis of nonproteinogenic α-and β-amino acids via transition metal coordination compounds

The complexes of glycine, -alanine, and -alanine with (S)-[N-(N-benzylprolyl)amino] benzophenone formed by Ni(II) and Cu(II) ions and Schiff bases enter into different nucleophilic and electrophilic reactions with the formation of diastereoisomeric complexes which decompose into proteinogenic and nonproteinogenic L-amino acids with a high chemical yield and elevated optical purity (70–90%). Optically pure amino acids can be obtained from diastereoisomerically pure complexes after the complexes are separated by recrystallization of the mixture of diastereoisomeric complexes formed. A new type of interphase catalysts of C-alkylation of achiral Schiff bases was proposed. The catalysts are positively charged Ni(II) and Cu(II) complexes of Schiff bases of chiral diamines. In some cases, these complexes have a higher activity and capacity to execute asymmetric alkylation than traditional chiral interphase catalysts based on cinchonidine.Based on materials in the section report by Yu. N. Belokon' to the 7th European Symposium on Organic Chemistry, ESOC-7.A. N. Nesmeyanov Institute of Organoelemental Compounds, Russian Academy of Sciences, 117813 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 5, pp. 1106–1127, May, 1992.     

Application of ammonia intermittent temperature-programmed desorption to evaluate surface acidity of tungsten oxide supported on activated carbon

Intermittent temperature-programmed desorption of ammonia was used to study the strength and population of surface acid sites of tungsten oxide supported on activated carbon pretreated at 350 and 700 degrees C. Catalysts pretreated at 350 degrees C showed two types of surface acid sites and desorption occurred with free readsorption until a temperature of around 300 degrees C was reached. Pretreatment at 700 degrees C produced three different states of ammonia adsorbed on the catalysts and desorption occurred with free readsorption.     

Effect of catalysts on the reaction of an aliphatic isocyanate and water

The kinetics of the reaction of aliphatic isocyanate with water were investigated with hexyl isocyanate as a model compound. The kinetic study was carried out with a titration method to determine the concentration of the isocyanate group as a function of time. Gas chromatography was used to augment the kinetic data obtained from the titration method. The effects of an organic acid [p‐toluene sulfonic acid monohydrate (p‐TSA)], a tertiary amine {diazabicyclo[2.2.2]octane (DABCO)}, and an organotin compound [dibutyltin dilaurate (DBTDL)] on the reaction were investigated for the conversion of isocyanate to a urea. Under the reaction conditions in this study, urea was the only product observed. The rate constants indicated that p‐TSA had low catalytic activity, DABCO had intermediate catalytic activity, and DBTDL had high catalytic activity. A reaction mechanism was proposed for each of the catalysts. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1677–1688, 2002     

Synthesis of end‐functionalized poly(methyl methacrylate) by ruthenium‐catalyzed living radical polymerization with functionalized initiators

A series of functionalized 2‐bromoisobutyrates and 2‐chloro‐2‐phenylacetates led to α‐end‐functionalized poly(methyl methacrylate)s in Ru(II)‐catalyzed living radical polymerization; the terminal functions included amine, hydroxyl, and amide. These initiators were effective in the presence of additives such as Al(Oi‐Pr)₃ and n‐Bu₃N. The chlorophenylacetate initiators especially coupled with the amine additive gave polymers with well‐controlled molecular weights (M_w/M_n = 1.2–1.3) and high end functionality (F_n ～ 1.0). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1937–1944, 2002     

Ruthenium‐catalyzed fast living radical polymerization of methyl methacrylate: The R?Cl/Ru(Ind)Cl(PPh3)2/n‐Bu2NH initiating system

A fast living radical polymerization of methyl methacrylate (MMA) proceeded with the (MMA)₂? Cl/Ru(Ind)Cl(PPh₃)₂ initiating system in the presence of n‐Bu₂NH as an additive [where (MMA)₂? Cl is dimethyl 2‐chloro‐2,4,4‐trimethyl glutarate]. The polymerization reached 94% conversion in 5 h to give polymers with controlled number‐average molecular weights (M_n's) in direct proportion to the monomer conversion and narrow molecular weight distributions [MWDs; weight‐average molecular weight/number‐average molecular weight (M_w/M_n) ≤ 1.2]. A poly(methyl methacrylate) with a high molecular weight (M_n ～ 10⁵) and narrow MWD (M_w/M_n ≤ 1.2) was obtained with the system within 10 h. A similarly fast but slightly slower living radical polymerization was possible with n‐Bu₃N, whereas n‐BuNH₂ resulted in a very fast (93% conversion in 2.5 h) and uncontrolled polymerization. These added amines increased the catalytic activity through some interaction such as coordination to the ruthenium center. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 617–623, 2002; DOI 10.1002/pola.10148