Intergrowth between V2O5 and TiO2 (anatase): High resolution electron microscopy evidence

V₂O₅/TiO₂ (anatase) with 5 and 20 wt.% loadings of V₂O₅ have been studied using high resolution electron microscopy. This has provided the first direct evidence for the formation of a coherent interfacial boundary between two crystalline TiO₂ and V₂O₅ phases. The type of the interfacial stacking was found to be similar for all the samples, whereas the length of the boundary formed depended on the V₂O₅ loading. A model for the atomic arrangement of this boundary based on a comparison of structural positions of oxygen and metal atoms in the crystal lattices of both phases is proposed.     

Immobilization of Polymer-Stabilized Noble Metal Colloids and Their Catalytic Properties for Hydrogenation of Olefins

Polymer-stabilized noble metal colloids were efficiently immobilized on silica by the addition of organic acids under mild conditions. The function of organic acids in the immobilization was studied by infrared spectroscopy. Transmission electron micrographs indicate that the immobilized colloids have a controlled particle size and size distribution. They serve as catalysts in the hydrogenation of cyclohexene and cyclopentadiene, the results of which show that this new type of immobilized colloid has high selectivity and good stability.     

Hydrogermylation of phenylacetylene catalyzed by onium chlorometallates

Triethylbenzylammonium chlorometallates [Et₃NCH₂Ph][MCl_n]^m? (M = Pt, Pd, Rh, Ir, Fe, Co, Cu, m = 1–3, n = 3–6), polymer-anchored ionic metal complexes [?—CH₂PBu₃][MCl_n]^n? and some other chlorometallates and complexes of platinum, rhodium, ruthenium and osmium were studied as catalysts in the hydrogermylation of phenylacetylene with triethylgermane. All the complexes containing platinum, palladium and rhodium were found to be effective catalysts. The cis/trans ratio of the products obtained is determined by the metal atom involved and decreases in the following order: Ir > Rh ? Pd > Pt.     

Reactivity and catalytic activity of cationic lonomers for the nucleophilic substitution reactions

Polystyrene-based crosslinked cationic ionomers containing ammonium or phosphonium chlorides (AxRCI and PxBuCI) were reacted with decyl methanesulfonate. The kinetic data were correlated with the swelling behavior of the ionomers and the solution viscosity of the corresponding linear ionomers. The reactivity of the ionomers was independent of the particle size of the ionomer beads, indicating no diffusion control of the reaction. The solvent and the ion content of the ionomers greatly affect the reactivity. In nonpolar solvents with a low acceptor number, A_N, such as toluene, the aggregation of ionic groups with an increasing ion content reduces the reactivity. A solvent with a high value of A_N, such as chloroform, led a very low reactivity independent of the ion content. Aprotic polar solvent, such as acetonitrila, promoted the dissociation of the ionic groups and furnished a relatively high reactivity independent of the ion content. Several catalytic substitution reactions were carried out under liquid-solid-solid triphase conditions. The kinetic results were accounted for in terms of slow nucleophile transport and fast chemical reaction within the ionomer particles. © 1994 John Wiley & Sons, Inc.     

H-, C-NMR and ethylene polymerization studies of zirconocene/MAO catalysts: effect of the ligand structure on the formation of active intermediates and polymerization kinetics

Using ¹H- and ¹³C-NMR spectroscopies, cationic intermediates formed by activation of L₂ZrCl₂ with methylaluminoxane (MAO) in toluene were monitored at Al/Zr ratios from 50 to 1000 (L₂ are various cyclopentadienyl (Cp), indenyl (Ind) and fluorenyl (Flu) ligands). The following catalysts were studied: (Cp-R)₂ZrCl₂ (R=Me, 1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄, Me₅, n-Bu, t-Bu), rac-ethanediyl(Ind)₂ZrCl₂, rac-Me₂Si(Ind)₂ZrCl₂, rac-Me₂Si(1-Ind-2-Me)₂ZrCl₂, rac-ethanediyl(1-Ind-4,5,6,7-H₄)₂ZrCl₂, (Ind-2-Me)₂ZrCl₂, Me₂C(Cp)(Flu)ZrCl₂, Me₂C(Cp-3-Me)(Flu)ZrCl₂ and Me₂Si(Flu)₂ZrCl₂. Correlations between spectroscopic and ethene polymerization data for catalysts (Cp-R)₂ZrCl₂/MAO (R=H, Me, 1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄, Me₅, n-Bu, t-Bu) and rac-Me₂Si(Ind)₂ZrCl₂ were established. The catalysts (Cp-R)₂ZrCl₂/AlMe₃/CPh₃⁺B(C₆F₅)₄⁻ (R=Me, 1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄, n-Bu, t-Bu) were also studied for comparison of spectroscopic and polymerization data with MAO-based systems. Complexes of type (Cp-R)₂ZrMe⁺←Me⁻-Al≡MAO (IV) with different [Me-MAO]⁻ counteranions have been identified in the (Cp-R)₂ZrCl₂/MAO (R=n-Bu, t-Bu) systems at low Al/Zr ratios (50-200). At Al/Zr ratios of 500-1000, the complex [L₂Zr(μ-Me)₂AlMe₂]⁺[Me-MAO]⁻ (III) dominates in all MAO-based reaction systems studied. Ethene polymerization activity strongly depends on the Al/Zr ratio (Al/Zr=200-1000) for the systems (Cp-R)₂ZrCl₂/MAO (R=H, Me, n-Bu, t-Bu), while it is virtually constant in the same range of Al/Zr ratios for the catalytic systems (Cp-R)₂ZrCl₂/MAO (R=1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄) and rac-Me₂Si(Ind)₂ZrCl₂/MAO. The data obtained are interpreted on assumption that complex III is the main precursor of the active centers of polymerization in MAO-based systems.     

CuO/CeO2催化剂的催化氧化性能及其表征

用CO流动反应法 ,程序升温还原 (TPR) ,光电子能谱 (XPS)和X射线衍射Rietveld分析等技术研究了CuO ,CeO2 及CuO/CeO2 各组分催化剂。结果表明 :单组分的CuO和CeO2 对CO的氧化活性较低 ,但CuO与CeO2 形成复合氧化物后 ,其CO氧化活性明显提高 ,这可能与铜物种在CeO2 表面的价态 (Cu2 + 和Cu+ ) ,分散状态和还原性能有关。CuO在CeO2 上的负载量对铜物种在CeO2 表面形成的价态 (Cu2 + 和Cu+ )至关重要 ,CuO的负载量为 1 0 %时 ,XPS检测不到Cu2p3/2 (eV)结合能 ;当CuO的负载量为 5 0 %时 ,CuO主要以Cu2 + 和Cu+ 形式存在 ,而负载量大于 5 0 %时 ,CuO则以Cu2 + 形式存在。由于形成了CuO/CeO2 复合氧化物 ,使离子半径小于Ce4 + 的CuO进入了CeO2 晶格 ;当CuO的负载量达到 5 0 %时 ,CuO的晶粒尺寸值为最小 ( 6 1nm) ,而晶格畸变值为最大 ( 2 86× 10 - 3) ,此时 ,催化剂具有较高的表面能和最佳的CO氧化活性     

Solidification of metallic tin in dispersed phase

Differential scanning calorimetry (DSC) and particle size measurements were carried out on disproportionation products of pure SnO to investigate the fusion and solidification behaviour of Sn droplets and their catalytic nucleation on Sn oxides. If disproportionation reaction takes place at T ≥ 798 K, the products are metallic Sn and SnO₂; but for 523 < T < 798 K, SnO₂ is replaced by an intermediate oxide (IO) Sn_xO_(1+x). On melting, samples with IO show a drop of melting point of metallic tin due to Gibbs–Thomson effect; no lowering of melting point was observed in samples with SnO₂. On the other hand, if solidification occurs in the presence of IO, Tin droplets always displayed three distinct exothermic solidification peaks, but if it takes place in the presence of SnO₂, only one exothermic peak is observed. Undercooling values and contact angles were determined for each of the heterogeneous nucleation processes. The different behaviour of metallic Tin droplets was related to the different lattice symmetry of SnO₂ and IO, which act as nucleation catalysts.     

Polymerization of MMA by oscillating zirconocene catalysts, diastereomeric zirconocene mixtures, and diastereospecific metallocene pairs

Characteristics of methyl methacrylate (MMA) polymerization using oscillating zirconocene catalysts, (2-Ph-Ind)₂ZrX₂ (X = Cl, 1; X = Me, 2), mixtures of rac- and meso-zirconocene diastereomers, (SBI)ZrMe₂ [3, SBI = Me₂Si(Ind)₂] and (EBI)ZrMe₂ [4, EBI = C₂H₄(Ind)₂], as well as diastereospecific metallocene pairs, rac-4/Cp₂ZrMe₂ (5) and rac-4/CGCTiMe₂ [6, CGC = Me₂Si(Me₄C₅)(t-BuN)], are reported. MMA polymerization using the chloride catalyst precursor 1 activated with a large excess of the modified methyl aluminoxane is sluggish, uncontrolled, and produces atactic PMMA. On the other hand, the polymerization by a 2/1 ratio of 2/B(C₆F₅)₃ or 2/Ph₃CB(C₆F₅)₄ is controlled and produces syndiotactic PMMA. Mixtures of diastereomeric ansa-zirconocenes 3 or 4 containing various rac/meso ratios, when activated with B(C₆F₅)₃, yield bimodal PMMA; this behavior is attributed to the meso-diastereomer that, in its pure form, affords bimodal, syndio-rich atactic PMMA. For MMA polymerization using diastereospecific metallocene pairs, rac-4/5 and rac-4/6, the isospecific catalyst site dominates the polymerization events under the conditions employed in this study, and the aspecific and syndiospecific sites are largely nonproductive, thereby forming only highly isotactic PMMA.     

烯烃氢甲酰化反应研究进展

本文综述了烯烃氢甲酰化反应的催化剂从钴配合物到铑配合物和从均相催化体系到两相催化体系的发展过程。比较了三种催化剂和两个催化体系的特点、应用情况及研究工作进展.     

The Influence of Sulfate‐Doping on the Nature of V Sites in VOx/TiO2 Catalysts

EPR, UV/Vis and FTIR spectroscopy as well as thermal analysis (TA/MS) were applied to study the influence of sulfate species present in the anatase support on the specific nature of VO_x species in supported VO_x/TiO₂ catalysts. Those sulfate species modify the local structure of the supported vanadyl species and lead to the formation of two types of VO²⁺ sites instead of only one type being formed on sulfate‐free anatase. EPR and FTIR spectroscopic measurements revealed that a part of the VO²⁺ species are directly bound to the surface sulfate species. By TA/MS it was found that SO₂ is released at lower temperature from VO_x/TiO₂ in comparison to the vanadium‐free support. The direct bonding between sulfate and VO_x species stabilizes the latter on the surface of VO_x/TiO₂ resulting in three effects: 1) a higher V site dispersion in comparison to sulfate‐free TiO₂, 2) a better resistance of surface vanadyls against diffusion into the bulk of the support and 3) a much faster reoxidation of reduced V sites than observed on sulfate‐free TiO₂.