空心微球结构Au/Ag合金泡沫块体的制备

将平均晶粒尺寸为4.6 nm的金粒子通过静电作用粘附于聚苯乙烯（PS）微球表面用于化学镀,化学镀金后PS表面的金沉积层几乎达到完全包覆,厚度70~90 nm;在Au/PS表面进行化学镀银,沉积的银颗粒堆积紧密,颗粒大小较先前沉积的金颗粒大,镀覆层厚度增厚至200~400 nm;模板去除后,获得了完全自支撑的Au40Ag60空心微球结构的圆柱状泡沫材料。制备的金银合金泡沫由直径约10 m的空心球壳组成,圆柱体直径约5 mm,密度约1.2 g/cm3。     

One-pot synthesis of N-methylimidazolium-based porous polymer monolith for capillary electrochromatography via free radical copolymerization and quaterisation

One-pot synthesis of porous polymer monolith decorated with N-methylimidazolium in a capillary was described. The polymer matrix was synthesized by in situ copolymerization and quaterization of 3-chloro-2-hydroxylpropyl methacrylate (CHPMA), ethylene dimethacrylate (EDMA), and N-methylimidazole (N-MIz). The influencing factors including amount of cross-linkers, composition of porogenic solvents, and polymerization temperature on the formation of the monolithic column were investigated. The monolithic column exhibited high column efficiency for thiourea, up to 135 000 plates per meter, and phenylmethanol, up to 102 000 plates per meter. Different types of compounds including alkylbenzenes, phenols, and inorganic anions were successfully baseline separated by capillary electrochromatography (CEC). The separation of theses analytes on the column indicated typical reversed-phase and anion-exchange chromatographic retention mechanism.     

In Situ Preparation of Ir/ZSM-5/Cordierite Honeycombs and their Application for NOx Abatement

ZSM-5 zeolites were synthesized in situ onto cordierite honeycombs by vapor phase transport (VPT) for the first time. The as-synthesized ZSM-5/cordierite honeycombs were impregnated with IrCl₃ and tested for NO_x reduction with a simulated exhaust gas as the reducing agent. Under the conditions of excess oxygen, the Ir/ZSM-5/cordierite monolith catalyst exhibited NO reduction of 73% at a temperature of 573 K and a space velocity of 20,000 h^–1.     

新型强阳离子交换聚合物整体柱的制备及其在奶制品中三聚氰胺测定中的应用

在内径为530 μm的石英毛细管中原位聚合得到一种新的强阳离子交换聚合物整体柱2-丙烯酰胺-2-甲基-1-丙磺酸-乙二醇二甲基丙烯酸酯聚合物(poly(AMPS-co-EDMA))整体柱,并将其作为聚合物整体柱微萃取(PMME)的萃取介质。优化N,N-二甲基甲酰胺(DMF)和聚乙二醇(PEG)致孔体系的比例,制备得到的poly(AMPS-co-EDMA)整体柱渗透性好、机械强度高且在水溶液中具有良好的稳定性。通过考察样品溶液的pH值、盐浓度和有机溶剂含量对萃取效率的影响,证明该整体柱主要通过强阳离子交换和疏水相互作用对三聚氰胺进行萃取富集。在PMME与高效液相色谱联用技术的基础上,建立了检测奶制品中三聚氰胺含量的分析方法。奶制品中三聚氰胺的检出限和定量限分别为0.09 mg/kg和0.3 mg/kg,在0.5~80 mg/kg的含量范围内具有良好的线性关系,日内、日间测定的相对标准偏差不高于7.5%。结果表明,该方法简便、快速、灵敏度高且成本低,适合于奶制品中微量三聚氰胺的检测。     

Composite honeycomb monoliths

A new approach has been developed for the preparation of monoliths as composite materials preserving unique properties of such initial compounds as TiO₂, zeolites, carbon materials,etc. Preparation and investigation of a large set of composite catalytic monoliths are discussed.     

Oxidative conversion of methane to syngas on metallic Ni monolith with Mg promotion

A MgO-promoted metallic nickel monolith was prepared from nickel sponge by sintering, acid treating and loading. The catalytic performances on the monolithic catalysts, unpromoted and promoted by MgO, were studied in the partial oxidation and oxidative steam and CO₂ reformings of methane to syngas.     

牛血清白蛋白修饰毛细管整体柱的制备及组氨酸对映体分离

以甲基丙烯酸缩水甘油酯为单体, 乙二醇二甲基丙烯酸酯为交联剂, 环己醇和正十二醇混合溶液为致孔剂, 在最佳聚合条件下, 以偶氮二异丁腈为引发剂, 制备了毛细管整体柱基质, 并且研究了单体、交联剂及致孔剂对整体柱基质孔结构及渗透性的影响; 使用Epoxy方法在基质表面键合BSA, 制得BSA修饰的毛细管整体柱. 将此毛细管整体柱应用于毛细管电色谱中, 成功地分离出了组氨酸对映体, 分离度良好.     

High-temperature methane oxidation over metallic monolith-supported zeolite catalysts containing Mn,Co, and Pd ions

The high-temperature complete oxidation of methane over metallic monolith-supported zeolite catalysts containing isolated Mn, Co, and Pd ions was studied. The reaction involves heterogeneous and heterogeneous-homogeneous catalytic processes. The ratio between these processes depends on the temperature, feed rate, and the amount of catalyst charged in the reactor. In the heterogeneous catalytic process, the activity of the catalysts supported on the Fe—Cr—Al monolithic alloy decreases in the series Pd > Mn > Co > Fe—Cr—Al monolith and the reaction rate uniformly increases with increasing contact time. In the heterogeneous-homogeneous process, the reaction rate drastically increases and a 100% conversion of methane to CO₂ can be achieved by minor variations of the contact time. In this case, methane oxidation depends not only on the catalyst chemical composition but also on its external surface area and the reaction volume.     

Adsorption Isotherms and Sites Distribution of Caffeic Acid – Imprinted Polymer Monolith from Frontal Analysis

The frontal analysis technique was successfully applied to the determination of the adsorption isotherms of the imprinted polymer monolith prepared by a in-situ synthesis method using caffeic acid as the template, and methacrylic acid, ethyl glycol dimethacrylate and2,2-azobisisobutyronitrile as the functional monomer, cross-linker and initiator, respectively, with tetrahydrofuran-iso-octane (2:1, /) as a porogen. Adsorption isotherms of the monolith were measured at 25, 45 and 60°C using tetrahydrofuran containing 1, 3 and 5% acetic acid as mobile phase, respectively. The adsorption capacity of the monolith for the template was found to be much stronger than the other structurally related compounds. The column temperature significantly affected the adsorption capacity of the monolith. The acetic acid in the mobile phase showed some influence on the adsorption of the template on the stationary phase. The adsorption behavior of the template on the monolith is best described by the Freundlich isotherm. From the best coefficients of the Bi-Langmuir fit, the binding constant and saturation capacities of the molecularly imprinted polymer monolith were obtained.     

Capillary electrochromatography with a neutral monolithic column for classification of analytes and determination of basic drugs in human serum

Capillary electrochromatography (CEC) using a neutral hydrophobic polymer-based monolithic column has been developed for classification of analytes based on their acidity and charges of group. The monolithic columns were prepared by in situ copolymerization of lauryl methacrylate and ethylene dimethacrylate without any charged monomers in the reaction mixture. The ionic analytes will only be driven by their electrophoretic mobilities and were separated on the basis of their differences in electrophoretic mobility and in hydrophobic interaction with the stationary phase. Only negatively or positively charged analyte (acid or basic) migrated toward detection window in a single run by applying negative or positive voltage. The CEC system was also applied for the analysis of basic drugs in human serum by internal standard method using acidic running buffer. The sample of human serum spiked with basic drugs was directly injected after a simple sample pretreatment. The calibration curves with regression coefficients (0.9995-0.9997) in the range of 0.318-80 microg/mL were obtained with the limits of detection being below 0.15 microg/mL. The intra- and inter-day precisions, determined as relative standard deviations, were less than 4.21%.