酵母菌模板法制备CeO2空心微球及其光催化性能

以酵母菌为生物模板辅助沉淀法制备了Ce O2空心微球。采用傅里叶转换红外光谱(FT-IR)、X射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和氮气吸附-脱附等对样品进行了表征,结果表明,在600℃煅烧后得到了Ce O2空心微球,其形态与酵母菌一致为椭球体,球壳是由大小约为25 nm的Ce O2纳米颗粒组成,比表面积为22 m2·g-1,远大于未用模板制备的Ce O2微粒的比表面积。通过紫外-可见漫反射测定,得到Ce O2空心微球的禁带宽度为3.03 e V,相比于相同条件下合成的无模板Ce O2禁带宽度(3.42 e V)明显减小。室温下用模拟太阳光照射降解酸性橙7(AO 7)对样品的光催化性能进行了测试,结果表明,在照射120 min之后降解率能达到96%以上,降解效果明显高于未使用模板的Ce O2微粒。对Ce O2空心微球的形成机理进行了分析。     

L-色氨酸分子印迹光子晶体水凝胶膜的制备及性能

采用胶体晶体模板法,借助"三明治"结构制备了可与基底剥离的分子印迹光子晶体水凝胶膜(MIPHs).该MIPHs以L-色氨酸(L-Trp)为模板分子,丙烯酰胺(AM)为功能单体,N,N'-亚甲基双丙烯酰胺(BIS)为交联剂,在紫外光下引发聚合.扫描电子显微镜(SEM)表征结果表明,MIPHs具有相互贯通的三维有序大孔结构.制得的MIPHs在L-Trp的缓冲溶液中可快速响应,当L-Trp的浓度从10~(-10)mol/L增大到10~(-5)mol/L时,MIPHs的Bragg衍射峰位移83 nm,并伴有明显的颜色变化.此外,MIPHs在L-Trp结构类似物L-酪氨酸(L-Tyr)和L-苯丙氨酸(L-Phe)的缓冲溶液中Bragg衍射峰位移较小,表明制得的MIPHs具有良好的选择性.     

Glass substrates crosslinked with tetracycline-imprinted polymeric silicate and CdTe quantum dots as fluorescent sensors

A fluorescence-based sensor that combines the merits of quantum dots (QDs) and molecularly imprinted polymers (MIPs) was first fabricated on a glass substrate via a sol–gel route. Some of the key performance factors, including silane selection, substrate etching, the reaction times of glass silanization and sol–gel polymerization, and the times and methods used for template stripping and loading, were discussed and determined. After fabricating the sensor on either a 3-aminopropyltriethoxysilane (APS) or a 3-mercaptopropyltriethoxysilane (MPS) modified glass substrate, APS showed a much better performance than MPS as both the capping reagent of QDs and the functional monomer of tetracycline-templated MIPs. The APS-QDs on APS-modified glass had a higher imprinted factor (IF = 5.6), a lower LOD (2.1 μM, 3σ), and a more stable signal (2.8%, n = 10 at 70 μM) than those on the MPS-modified glass (IF = 5.2, LOD = 6.5 μM, stability = 6.2%). Furthermore, the recoveries of tetracycline (70 μM) from BSA (133 μg/mL) and FBS (0.66 ppt) by the APS-modified glass were 98% (RSD = 3.5%, n = 5) and 97% (RSD = 5.7%), respectively. For the MPS-modified glass, recoveries of 95% (RSD = 7.2%) and 89% (RSD = 8.7%) were observed at 67 μg/mL of BSA and 0.33 ppt of FBS, respectively.     

Magnetic deep eutectic solvents molecularly imprinted polymers for the selective recognition and separation of protein

A novel and facile magnetic deep eutectic solvents (DES) molecularly imprinted polymers (MIPs) for the selective recognition and separation of Bovine hemoglobin (BHb) was prepared. The new-type DES was adopted as the functional monomer which would bring molecular imprinted technology to a new direction. The amounts of DES were optimized. The obtained magnetic DES-MIPs were characterized with fourier transform infrared spectrometry (FT-IR), thermogravimetric analysis (TGA), field emission scanning electron microscope (FESEM), dynamic light scattering (DLS), elemental analysis and vibrating sample magnetometer (VSM). The results suggested that the imprinted polymers were successfully formed and possessed a charming magnetism. The maximum adsorption capability (Q_max) and dissociation constant (K_L) were analyzed by Langmuir isotherms (R² = 0.9983) and the value were estimated to be 175.44 mg/g and 0.035 mg/mL for the imprinted particles. And the imprinted particles showed a high imprinting factor of 4.77. In addition, the magnetic DES-MIPs presented outstanding recognition specificity and selectivity so that it can be utilized to separate template protein from the mixture of proteins and real samples. Last but not least, the combination of deep eutectic solvents and molecular imprinted technology in this paper provides a new perspective for the recognition and separation of proteins.     

氨基脲分子印迹电化学传感器的制备及应用

以氨基脲(SEM)为模板分子,邻苯二胺为功能单体,在0.1 mol/L NaAc-HAc缓冲液(pH 5.2)中,通过电聚合法制备分子印迹传感器.采用循环伏安法(CV)、差分脉冲法(DPV)、电化学阻抗谱(EIS)和扫描电镜表征了此分子印迹传感器的识别性能和表面形貌.结果表明,此传感器具有粗糙、多孔的形貌,对SEM具有良好的选择性识别.在0.5 mol/L KCl-0.005 mol/L K3[Fe(CN)6]溶液中,采用DPV方法考察了功能单体与模板分子的摩尔比、模板洗脱剂、洗脱时间和温育时间对传感器响应的影响.优化后的实验条件为:功能单体与模板分子的摩尔比1:2,洗脱液为0.2 mol/L NaOH,洗脱时间15 min,温育时间12 min.在优化的实验条件下,传感器的DPV峰电流差值与SEM的浓度在3.75～ 188 ng/L范围呈良好的线性关系,检出限为1.5 ng/L(S/N=3).将此传感器应用于市售新鲜虾肌肉及受污染虾肌肉中SEM含量测定,加标回收率为80％～97％.     

Selective enrichment and separation of phosphotyrosine peptides by thermosensitive molecularly imprinted polymers

Novel thermosensitive molecularly imprinted polymers were successfully prepared using the epitope imprinting approach in the presence of the mimic template phenylphosphonic acid, the functional monomer vinylphosphonic acid‐Ti⁴⁺, the temperature‐sensitive monomer N‐isopropylacrylamide and the crosslinker N,N′‐methylenebisacrylamide. The ratio of the template/thermosensitive monomers/crosslinker was optimized, and when the ratio was 2:2:1, the prepared thermosensitive molecularly imprinted polymers had the highest imprinting factor. The synthetic thermosensitive molecularly imprinted polymers were characterized by Fourier transform infrared spectroscopy to reveal the combination and elution processes of the template. Then, the adsorption capacity and thermosensitivity was measured. When the temperature was 28°C, the imprinting factor was the highest. The selectivity and adsorption capacity of the thermosensitive molecularly imprinted polymers for phosphotyrosine peptides from a mixture of three tailor‐made peptides were measured by high‐performance liquid chromatography. The results showed that the thermosensitive molecularly imprinted polymers have good selectivity for phosphotyrosine peptides. Finally, the imprinted hydrogels were applied to specifically adsorb phosphotyrosine peptides from a sample mixture containing phosphotyrosine and a tryptic digest of β‐casein, which demonstrated high selectivity. After four rebinding cycles, 78.9% adsorption efficiency was still retained.     

Preparation of molecularly imprinted polymeric fibers using a single bifunctional monomer for the solid‐phase microextraction of parabens from environmental solid samples

In this study, molecularly imprinted polymer fibers for solid‐phase microextraction have been prepared with a single bifunctional monomer, N,O‐bismethacryloyl ethanolamine using the so‐called “one monomer molecularly imprinted polymers” method, replacing the conventional combination of functional monomer and cross‐linker to form high fidelity binding sites. For comparison, imprinted fibers were prepared following the conventional approach based on ethylene glycol dimethacrylate as cross‐linker and methacrylic acid as monomer. The recognition performance of the new fibers was evaluated in the solid‐phase microextraction of parabens, and from this study it was concluded that they provided superior performance over conventionally formulated fibers. Ultimately, real‐world environmental testing on spiked solid samples was successful by the molecularly imprinted solid‐phase microextraction of samples, and the relative recoveries obtained at enrichment levels of 10 ng/g of parabens were within 78–109% for soil and 83–109% for sediments with a relative standard deviation <15% (n = 3).     

Electromembrane extraction of tartrazine from food samples: Effects of nano‐sorbents on membrane performance

In the present study, for the first time electromembrane extraction followed by high‐performance liquid chromatography coupled with ultraviolet detection was developed and validated for the determination of tartrazine in some food samples. The parameters influencing electromembrane extraction were evaluated and optimized. The membrane consists of 1‐octanol immobilized in the pores of a hollow fiber. As a driving force, a 30 V electrical field was applied to make the analyte migrate from sample solution with pH 3, through the supported liquid membrane into an acceptor solution with pH 10. Best preconcentration (enrichment factor >21) was obtained in extraction duration of 15 min. Effects of some solid nano‐sorbents like carbon nanotubes and molecularly imprinted polymers on membrane performance and electromembrane extraction efficiency were evaluated. The method provided the linearity in the range 25–1000 ng/mL for tartrazine (R² > 0.9996) with repeatability range (RSD) between 3.8 and 8.5% (n = 3). The limits of detection and quantitation were 7.5 and 25 ng/mL, respectively. Finally, the method was applied to the determination and quantification of tartrazine from some food samples with relative recoveries in the range between 90 and 98%.     

Preparation of dummy‐imprinted polymers by Pickering emulsion polymerization for the selective determination of seven bisphenols from sediment samples

The dummy molecularly imprinted polymers were prepared by Pickering emulsion polymerization. 4,4′‐(1‐Phenylethylidene) bisphenol was selected as the dummy template to avoid the leakage of the target bisphenols. The microsphere particles were characterized by scanning electron microscopy and nitrogen adsorption–desorption measurements, demonstrating that the regular‐shaped and medium‐sized particles (40–70 μm) were obtained with a specific surface area of 355.759 m²/g and a total pore volume of 0.561 cm³/g. The molecular imprinting properties of the particles were evaluated by static adsorption and chromatographic evaluation experiments. The association constant and maximum adsorption amount of bisphenol A were 0.115 mmol/L and 3.327 μmol/g using Scatchard analysis. The microsphere particles were then used as a solid‐phase extraction sorbent for selective extraction of seven bisphenols. The method of dummy molecularly imprinted solid‐phase extraction coupled with high‐performance liquid chromatography and diode array detection was successfully established for the extraction and determination of seven bisphenols from environmental sediment samples with method detection limits of 0.6–1.1 ng/g. Good recoveries (75.5–105.2%) for sediment samples at two spiking levels (500 and 250 ng/g) and reproducibility (RSDs < 7.7%, n = 3) were obtained.     

Halloysite‐based dopamine‐imprinted polymer for selective protein capture

We describe a facile, general, and highly efficient approach to obtain polydopamine‐coated molecularly imprinted polymer based on halloysite nanotubes for bovine serum albumin. The method combined surface molecular imprinting and one‐step immobilized template technique. Hierarchically structured polymer was prepared in physiological conditions adopting dopamine as functional monomer. A thin layer of polydopamine can be coated on the surface of amino‐modified halloysite nanotubes by self‐polymerization, and the thickness of the imprinted shells can be controlled by the mass ratio of matrix and dopamine. The polymer was characterized by Fourier transform infrared spectrometry, transmission electron microscopy, and thermogravimetric analysis. The prepared material showed high binding capacity (45.4 mg/g) and specific recognition behavior toward the template protein. In addition, stability and regeneration analyses indicated that the imprinted polymer exhibited excellent reusability (relative standard deviation < 9% for batch‐to‐batch evaluation). Therefore, the developed polymer is effective for protein recognition and separation.