Automated derivatization for on-line solid-phase extraction-gas chromatography; phenolic compounds

An automated system for derivaatization was coupled on-line with solid-phase extraction-gas-chromatography (SPE-GC). The system was optimized for the determination of phenol and chlorinated phenols in aqueous samples. The test analytes were acetylated with acetic anhydride; proper buffering of the sample was a critical factor. Next, the phenol acetates were enriched on a SPE cartridge and transferred to a GC; two appraoaches were studied. In the first approach, the derivatives were enriched on disposable C18 cartridges (ASPEC type) and desorbed with methylacetate. Aan aliquot of the final eluate was injected on-line the GC by means of a loop-type interface. In the second approach, trace enrichment was performed on 10 × 2 mm i.d. LC-type precolumn packed with polystyrenedivinylbenzene copolymer (PLRP-S) this precolumn was dried with a mitrogen purge and the phenol acetates were desorbed with ethyl acetate which was injectedon-line into the retention gap of the GC under partially concurrent solvent evaporation (PCSE) conditions. The Derivatization-SPE-GC system which was based on the loop-type interface has the advantage of simplicity and easy operation, the main drawback is the impossibility to determine phenol acetates which elute prior to trichlorophenol acetates. With the derivatization-SPE-GC approach using PCSE-based desorption, even the most volatile analyte of the test series, phenol acetate, can be determined successfully. The entire procedure, including the derivatization step, was fully automated and integrated in one set-up. The precision data for the integrated on-line derivatization-SP-FID system were fully satisfactory, with RSD values of 1–12 % at the 1 μg/1 level. When a sample volume of 2.2 ml was analyzed, The detection limits for the chlorinated phenol acetates were in the 0.1–0.3 μg/1 range.     

Application of the stabilization method to interacting resonances

The stabilization method is applied to the case of interacting resonances in the photo-dissociation of van der Waals clusters composed by a rare gas atom bound to a dihalogen molecule. The study of an illustrative two-dimensional model consisting in a T-shaped NeI₂ molecule shows the adequacy of the method whenever the projection of the stabilization wave functions on the assumed prepared initial state is accounted for. The agreement of the fragmentation cross-sections with some previous results using the effective resolvent method and accurate close-coupling calculations is excellent. The method reveals its utility as a complementary tool since allows, through the analysis of the stabilization wave function in terms of zero-order levels, a precise characterization of the resonant states involved. Received 5 April 2002 / Received in final form 24 May 2002 Published online 19 July 2002     

Normalization and noise-reduction algorithm for fringe patterns

This paper presents a fringe pattern normalization and noise-reduction algorithm. Locally the background noise is suppressed, the modulation normalized and the noise smoothed. An expression to calculate the cosine-only term is formulated. It is related to the directional derivatives of the intensity fringes. Two-dimensional Fourier series are used to calculate the parameters needed for the algorithm. Experimental work is presented using diffraction and ESPI images. The programming is relatively simple and involves mainly local convolutions. The processing time using a 2 GHz computer to normalize an image of 256 × 256 pixels is approximately one second.     

Poly(ortho‐phenylene ethynylene)s: Synthetic accessibility and optical properties

Poly(ortho‐phenylene ethynylene)s (PoPEs) have been synthesized via an in situ activation/coupling AB′ polycondensation protocol. The resulting polymers have been characterized by several analytical methods and are shown to have no structural defects. Although the Sonogashira–Hagihara polycondensation reaction is less efficient than for the preparation of the corresponding meta‐ and para‐linked polymers, presumably because of steric hindrance caused by the ortho substituents, the process can be accelerated by the use of microwave irradiation. Optical spectroscopy indicates solvent‐dependent conformational changes between extended transoid and helical cisoid conformations, providing the first experimental evidence for solvophobically driven folding of the PoPE backbone. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1619–1627, 2006     

双频超声交替强化超临界流体萃取装置的设计与应用

本文针对超临界流体萃取（SFE）系统设备的特点，设计丁可用于强化SFE过程的双频超声波交替强化装置。以香椿叶中黄酮类化合物为提取对象，对超声强化USFE过程的影响因素及强化效果进行了实验研究，结果表明；低频超声利于提取，频率为20kHz的超声强化的萃取率最大，38kHz的超声最小，两者交替的居于中间。     

Two methods for semi-automated quantification of changes in ventricular volume and their use in schizophrenia

Two semi-automated methods for quantification of ventricular volume change from baseline and follow-up magnetic resonance imaging scans have been developed. Technique 1 employs direct segmentation of the ventricles from both the scans using thresholding and contour extraction. Technique 2 operates on difference images produced by voxel based intensity subtraction of the baseline from the registered follow-up images. Here, all voxels with intensities above a noise threshold and in a restricted area are monitored to compute volumetric changes. In phantom measurements the first technique was accurate to 0.0046%, the second to 0.167% of the phantom volume. Results from normal volunteers was that the average ventricular volume changed by 1.52% and 1.54% for images acquired within 9 months using techniques 1 and 2, respectively. With schizophrenic patients mean change of 10.78% and 9.43% were found employing the first and second procedures, respectively. All measurements agreed with a radiologist’s visual grading of the changes. Robust, objective, fast, easy-to-use, and fairly accurate procedures have been developed and validated to quantify volumetric changes.     

Application of extraction disks in dissolution tests of clenbuterol and levothyroxine tablets by capillary electrophoresis

Sample preparation procedures using octadecyl (C₁₈) extraction disks were developed to obtain accurate and reproducible results for determinations of clenbuterol (20 μg per dose) and levothyroxine (100 μg per dose) in dissolution media of solid oral dosage forms. Preconcentration of samples allowed final concentrations of 1.1 μg/ml of clenbuterol and 4.0 μg/ml of levothyroxine to be reached prior to CE analysis. The results obtained by CE were in good agreement with those of HPLC. The precision of the migration time, peak area, peak height and accuracy were determined in both intea-day (n = 6) and inter-day (n =18) assays. Linearity was demonstrated over the ranges 0.5–80.0 μg/ml of clenbuterol and 1.0–30.0 μg/ml of levothyroxine. The mean recoveries were higher than 94.0%, ranging from 50 to 125% levels with respect to dose potencies. The proposed methodology may be generally applied to determine drugs at ng/ml concentrations.     

从芒果皮中提取果胶的工艺研究

果胶是一种大分子多糖类物质 ,具有良好的胶凝作用 ,用途广泛 ,在国内外市场上的销量很好。 1 990年世界上果胶总产量约 2 5 0 0 0吨 ,而我国 1 990年仅在食品工业上消耗的果胶就达 1 0 0 0吨 ,但国内市场上销售的果胶大部分为进口货[1] 。果胶在我国的生产仍处于开发阶段 ,所以发掘新的提取资源、提高果胶质量、降低果胶生产成本的意义十分重大。目前 ,已有以柑桔皮、向日葵盘、苹果皮、香蕉皮、马铃薯渣为原料提取果胶的研究报道 ,如何从芒果皮中提取果胶却未见报道。芒果在制造罐头和饮料中副产大量下脚料———芒果皮 ,未能得到充分利用…