Si微电阻桥温度分布与热传导特性的显微Raman光谱研究

采用显微Raman光谱方法对红外目标模拟器中重掺杂Si微电阻桥单元的热传导特性进行研究，根据Si桥的实际特性建立相应的Raman散射模型，通过测量Raman峰位的移动得到高功率激光辐照下测量点的温度.对Si桥桥面分别进行了沿某些特殊线段的逐点线扫描和覆盖全部桥面的面扫描，得到各点的温升及其分布.用基于有限元分析的软件结合Si桥结构参数对各测量点的温升进行了模拟计算，其结果在热导分布的基本趋势上与实验相一致.实验细致地揭示了热导分布的局域起伏，反映出实际器件的不均匀性，为改进器件设计、优化器件性能提供了实验依据. 关键词： Raman光谱 Si桥 温度分布 热导     

Speciation Analysis of Inorganic Tin (Sn(II)/Sn(IV)) by Graphite Furnace Atomic Absorption Spectrometry Following Ion-Exchange Separation

A new method based on anion exchange resin separation and graphite furnace atomic absorption spectrometry (GFAAS) detection is proposed for the determination of inorganic tin species. The result showed that Sn(IV) was quantitatively retained on the resin when [HCl] = 9.0 mol · L⁻¹, but Sn(II) could not be adsorbed on the resin under the same condition. Thus, a separation of Sn(II) and Sn(IV) has been realized. When the concentration of NaOH solution was between 2.0–7.0 mol · L⁻¹, Sn(IV) that adsorbed on the resin could be eluated from the resin completely. Meanwhile, under the atmosphere and the nitrogen states, the translation between Sn(II) and Sn(IV) was investigated. Under the optimal conditions, the detection limit of Sn(IV) is 0.40 μg · L⁻¹ with RSD of 2.3% (n = 5, c = 2.0 μg · L⁻¹). The proposed method was applied to the speciation analysis of tin in different water samples and the recovery of total Sn was in the range of 98.7–101.7%. In order to verify the accuracy of the method, a certified reference water sample was analyzed and the results obtained were in good agreement with the certified value.     

New isothermal equation of state of solids applied to high pressures

In the present paper, a new two-parameter inverted equation of state (EOS) is developed which is found to be working very well in the high-pressure region. To check its success and validity, this EOS has been applied in a number of solids. The computed volume compression is found to be in very good agreement with the experimental data in the whole range of pressure in all the solids. The minimum and the maximum pressure range used in the present study is 0–320 kbar and 0–3000 kbar, respectively.     

Organic synthesis based on cathodic deprotonation of acids

The results of studies on electrosynthesis involving carb- and heteroanions generated by cathodic deprotonation of acids (CDA), carried out in the laboratory headed by the author, are surveyed. These studies resulted in the elaboration of efficient electrochemical versions of the known Michaelis-Becker, Wittig-Horner, and Perkin reactions; electrochemical analogs of homolytic aromatic substitution, alkylation, heterocyclization,etc. were developed. Based on CDA, convenient and promising methods for preparing variousN-, O-, P-, S-, andC-alkylated and arylated substances have been developed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1411–1422, August, 1995.The author is grateful to Professor V. A. Dorokhov, Professor V. P. Litvinov, and researchers from the laboratories of N. D. Zelinsky Institute of Organic Chemistry headed by them, who participated in joint studies.The work was carried out with financial support from the International Science Foundation (Grant No. MHYOO).     

Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007     

Organometallic chemistry related to applications for microelectronics in Japan

This is meant to be a brief overview of the developments of research activities in Japan on organometallic compounds related to their use in electronic and optoelectronic devices. The importance of organometallic compounds in the deposition of metal and semiconductor films for the fabrication of many electronic and opto-electronic devices cannot be exaggerated. Their scope has now extended to thin-film electronic ceramics and high-temperature oxide superconductors. A variety of organometallic compounds have been used as source materials in many types of processing procedures, such as metal–organic chemical vapor deposition (MOCVD), metalorganic vapor-phase epitaxy (MOVPE), metal–organic molecular-beam epitaxy (MOMBE), etc. Deposited materials include silicon, Group III–V and II–VI compound semiconductors, metals, superconducting oxides and other inorganic materials. Organometallic compounds are utilized as such in many electronic and optoelectronic devices; examples are conducting and semiconducting materials, photovoltaic, photochromic, electrochromic and nonlinear optical materials. This review consists of two parts: (I) research related to the fabrication of semiconductor, metal and inorganic materials; and (II) research related to the direct use of organometallic materials and basic fundamental research.     

A New Method for Rotation and Brightness Invariant Pattern Recognition Based on Modified Multiple Circular Harmonic Expansions

A new method for rotation and brightness invariant pattern recognition was proposed by applying multiple circular harmonic expansions to the joint transform correlator. The amplitudes of the multiple orders of circular harmonic expansions made from a detecting image were synthetically modified to respond to the same auto-correlation peaks. These modified circular harmonic expansions were arranged in the input plane as reference patterns together with an arbitrary target pattern, and the correlation signals between them were calculated in the subtracted joint transform correlator. The fraction of the correlation-peak intensities between the target and the references were extracted as a new discrimination parameter. This new parameter performs pattern recognition under rotation and brightness invariance with good discriminability. Its high discriminability has been proved in computer simulations using the face image patterns of many individuals.     

Skin-Depth Theory Explaining Anomalous Picosecond-Terawatt Laser Plasma Interaction II

The anomaly of ion emission at laser irradiation of targets measured by Badziak et al. was analyzed on the background of the extensive research in the past. In contrast to the irradiation with lasers of longer than 100 ps pulse duration, a drastic decrease of the maximum ion energies was measured with ps pulses. Very strange was the observation that the number of emitted fast ions was intensity independent. The usual ponderomotive or relativistic self-focusing theory and related processes could not explain the results. Instead a direct interaction within the skin depth of the irradiated target was concluded. This model confirms the plane geometry nonlinear force interaction in the ps range producing fast plasma blocks moving perpendicular off or into the target. The block moving into the target opens a new scheme of laser fusion by modifying the experiments of Norreys et al. The use of relatively low subrelativistic laser intensities for the new scheme of laser fusion is evaluated on the background of the long years studies of nonlinear force driven plasma blocks and earlier interpenetration fusion reactions for providing the parameters for expected fusion gains much higher than the experiment of Norreys et al. for a fusion power scheme.