A Selenium‐Nitrogen Chain with Selenium in Different Oxidation States

The reaction of tBuNH₂ with a mixture of SeCl₂ and SeOCl₂ in a 6:2:1 molar ratio produces the novel selenium‐nitrogen chain ClSeN(tBu)Se(O)Cl ( 4 ), in which the selenium atoms are in two different oxidation states, Se^II and Se^IV. The crystal structure of 4 is compared with that of the related Se^II/Se^II system ClSeN(tBu)SeCl ( 1 ) and differences are attributed to hyperconjugative effects. The energetics of the formation of 4 via two different routes are elucidated by PBE0/def2‐TZVPP calculations.     

Partitioned partial least squares regression with application to a batch fermentation process

The performance of Partial Least Squares regression (PLS) in predicting the output with multivariate cross‐ and autocorrelated data is studied. With many correlated predictors of varying importance PLS does not always predict well and we propose a modified algorithm, Partitioned Partial Least Squares (PPLS). In PPLS the predictors are partitioned into smaller subgroups and the important subgroups with high prediction power are identified. Finally, regular PLS analysis using only those subgroups is performed. The proposed Partitioned PLS (PPLS) algorithm is used in the analysis of data from a real pharmaceutical batch fermentation process for which the process variables follow certain profiles during a specific fermentation period. We observed that PPLS leads to a more accurate prediction of the yield of the fermentation process and an easier interpretation, since fewer predictors are used in the final PLS prediction. In the application important issues such as alignment of the profiles from one batch to another and standardization of the predictors are also addressed. For instance, in PPLS noise magnification due to standardization does not seem to create problems as it might in regular PLS. Finally, PPLS is compared to several recently proposed functional PLS and PCR methods and a genetic algorithm for variable selection. More specifically for a couple of publicly available data sets with near infrared spectra it is shown that overall PPLS has lower cross‐validated error than PLS, PCR and the functional modifications hereof, and is similar in performance to a more complex genetic algorithm. Copyright © 2011 John Wiley & Sons, Ltd.     

Study on Rhizoma Chuanxiong based on capillary electrophoresis with amperometric detection

<正>A high-performance capillary electrophoresis with amperometric detection(CE-AD) method has been developed for the analysis of seven bioactive ingredients,namely ferulic acid(FA),vanillin,vanillic acid,p-hydroxybenzoic acid,caffeic acid,gallic acid and protocatechuic acid,in Rhizoma Chuanxiong.The effects of several factors such as the acidity and concentration of running buffer,the separation voltage,the applied potential to working electrode and the injection time were investigated.Under the optimum conditions,the seven analytes could be well separated within 21 min at the separation voltage of 16 kV in a 60 mmol/L borax running buffer(pH 8.7).A 300μm diameter carbon disk electrode has a good response at potential of +950 mV(vs.SCE) for all analytes.Good linear relationship was established over three orders of magnitude with detection limits(S/N = 3) ranged from 3.3×10~(-7) to 6.7×10~(-9)g/mL.This proposed method has been successfully applied for the determination and comparison of different batches of Rhizoma Chuanxiong samples based on their characteristic electrochemical profiles.     

Evaluation of comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry for the diagnosis of inherited metabolic disorders using an automated data processing strategy

Organic acidurias are a large group of inherited metabolic disorders (IMDs), commonly diagnosed by GC-MS analysis of organic acids in urine after acidic extraction and trimethylsilylation. In this study, a GC×GC-ToF-MS method has been optimized for the analysis of pathological metabolites in urine. An automated data processing strategy based on the use of mass spectra and GC retention times for the target search and quantification of pathological metabolites has been developed. Using this procedure, each unknown sample is automatically examined for the presence of markers of several diseases at the same time. The method has been applied for the analysis of 6 challenging proficiency testing samples from patients with IMDs (thymidine phosphorylase deficiency, mevalonic aciduria, hawkinsinuria, aromatic l-amino acid decarboxylase deficiency, propionic acidemia and medium-chain acyl-CoA dehydrogenase deficiency). Using the GC×GC-ToF-MS method, we were able to determine complete sets of markers for all the IMDs. The quality of the mass spectral matches for the pathological markers was higher than 800 (out of 1000).     

Molar concentration-depth profiles at the solution surface of a cationic surfactant reconstructed with angle resolved X-ray photoelectron spectroscopy

In the current work, we first reconstructed the molar fraction-depth profiles of cation and anion near the surface of tetrabutylammonium iodide dissolved in formamide by a refined calculation procedure, based on angle resolved X-ray photoelectron spectroscopy experiments. In this calculation procedure, both the transmission functions of the core levels and the inelastic mean free paths of the photoelectrons have been taken into account. We have evaluated the partial molar volumes of surfactant and solvent by the densities of such solutions with different bulk concentrations. With those partial molar volumes, the molar concentration-depth profiles of tetrabutylammonium ion and iodide ion were determined. The surface excesses of both surfactant ions were then achieved directly by integrating these depth profiles. The anionic molar concentration-depth profiles and surface excesses have been compared with their counterparts determined by neutral impact ion scattering spectroscopy. The comparisons exhibit good agreements. Being capable of determining molar concentration-depth profiles of surfactant ions by core levels with different kinetic energies may extend the applicable range of ARXPS in investigating solution surfaces.     

Composition depth profiles of Bi3.15Nd0.85Ti3O12 thin films studied by X-ray photoelectron spectroscopy

In the present work, X-ray photoelectron spectroscopy (XPS) was used to investigate the composition depth profiles of Bi_3.15Nd_0.85Ti₃O₁₂ (BNT) ferroelectric thin film, which was prepared on Pt(1 1 1)/Ti/SiO₂/Si(1 0 0) substrates by chemical solution deposition (CSD). It is shown that there are three distinct regions formed in BNT film, which are surface layer, bulk film and interface layer. The surface of film is found to consist of one outermost Bi-rich region. High resolution spectra of the O 1s peak in the surface can be decomposed into two components of metallic oxide oxygen and surface adsorbed oxygen. The distribution of component elements is nearly uniform within the bulk film. In the bulk film, high resolution XPS spectra of O 1s, Bi 4f, Nd 3d, Ti 2p are in agreement with the element chemical states of the BNT system. The interfacial layer is formed through the interdiffusion between the BNT film and Pt electrode. In addition, the Ar⁺-ion sputtering changes lots of Bi³⁺ ions into Bi⁰ due to weak Bi-O bond and high etching energy.     

Mathematical modeling of two-photon thermal fields in laser–solid interaction

In this paper, we have developed an analytical model to study the temperature distributions in IR optical materials heated by laser pulses. Our model takes into account the two-photon absorption (TPA). The calculations are based on a three-dimensional model of heat diffusion in solids using the integral transform method. We find out the rigorous analytical expression of the thermal field when one considers both one- and two-photon absorption. The model is valid for any laser–solid system whose interaction can be described by the generalized Beer–Lambert law. Specific results are presented for an application of the model to ZnSe sample. We find out that TPA can produce detectable temperature variation.     

Blow-up of solutions to a parabolic system with nonlocal source

This paper deals with a parabolic system with different diffusion coefficients and coupled nonlocal sources, subject to homogeneous Dirichlet boundary conditions. The conditions on global existence, simultaneous or non-simultaneous blow-up, blow-up set, uniform blow-up profiles and boundary layer are got using comparison principle and asymptotic analysis methods.     

Effect of the ionic strength of salts on retention and overloading behavior of ionizable compounds in reversed-phase liquid chromatography I. XTerra-C18

The influence of the salt concentration (potassium chloride) on the retention and overloading behavior of the propranolol cation (R'-NH2+ -R) on an XTerra-C18 column, in a methanol:water solution, was investigated. The adsorption isotherm data were first determined by frontal analysis (FA) for a mobile phase without salt (25% methanol, v/v). It was shown that the adsorption energy distribution calculated from these raw adsorption data is bimodal and that the isotherm model that best accounts for these data is the bi-Moreau model. Assuming that the addition of a salt into the mobile phase changes the numerical values of the parameters of the isotherm model, not its mathematical form, we used the inverse method (IM) of chromatography to determine the isotherm with seven salt concentrations in the mobile phase (40% methanol, v/v; 0, 0.002, 0.005, 0.01, 0.05, 0.1 and 0.2 M). The saturation capacities of the model increase, q(s,1) by a factor two and q(s,2) by a factor four, with increasing salt concentration in the range studied while the adsorption constant b1 increases four times and b2 decreases four times. Adsorbate-adsorbate interactions vanish in the presence of salt, consistent with results obtained previously on a C18-Kromasil column. Finally, besides the ionic strength of the solution, the size, valence, and nature of the salt ions affect the thermodynamic as well as the mass transfer kinetics of the adsorption mechanism of propranolol on the XTerra column.     

基于白光扫描干涉法的光纤折射率分布的测量

提出了一种光纤折射率分布的测量方法,采用白光扫描干涉技术,并在参考镜上构造与光纤样品相同的结构来克服白光相干长度短的限制,优化了光路,提高了干涉条纹间的对比度.采用与白光干涉信号的包络线呈高斯分布的Morlet小波作为小波变换的母小波进行拟合处理,得到光纤与已知折射率的匹配液之间的相对高度.通过计算获得光纤的折射率分布...