Asymmetric Reduction Using Lithium Aluminum Hydride Modified with Chiral Ligands Prepared from (1R)-(-)-β-Pinene

The reduction of prochiral ketones using chiral reducing reagents, prepared from lithium aluminum hydride and (-)-(1R, 2S, 3S, 5R)-10-anilinopinanediol (5) and (-)-(1R, 2S, 3S, 5R)-10-N-methylanilinopinanediol (6), affords chiral secondary alcohols in useful chemical yields (70 ～ 93%) but in low optical purity (8 ～ 33% ee). Modifiers 5 and 6 are synthesized from (lR)-(-)-β-pinene in three steps.     

Investigation of Glass-Like Sol-Gel Coatings for Corrosion Protection of Stainless Steel Against Liquid and Gaseous Attack

Glass-like sol-gel coatings have been investigated as corrosion protective coatings on stainless steel. Magnesium- and borosilicate coatings with thickness of about 100–700 nm and methyl-modified SiO2 coatings with a thickness of about 2 m were deposited on stainless steel plates by dip-coating. The coatings were densified between 400°C and 500°C in different atmospheres (N2, air) for 1 h. The corrosion protection against gaseous attack was investigated by accelerated corrosion tests, at 800°C in air for 1 h. A corrosion protection factor was calculated from the relation Fe/Fe2O3, determined by XRD on the surface of coated and uncoated samples. Methyl-modified SiO2 coatings showed a protection factor, which was 2 orders of magnitude higher than for the other coatings. Electrochemical investigations were performed on samples submerged in a NaCl solution for 200 h. The corrosion propagation, polarization resistance and impedance vector were measured. For accelerated corrosion tests, polarization intensity curves were determined for high potentials of up to 1 V. Again excellent results were obtained for the methyl-modified SiO2 coatings, which remained passive for 200 h. Results of the salt spray corrosion test, however, showed no corrosion protection by the sol-gel coatings. After 2000 h in the salt spray chamber the steel was corroded and the coatings peeled off. It is concluded that for the further development of these coatings an improved interfacial passivation will be required.     

游离氧化钙,氧化镁连续测定的电导法研究

研究了乙二醇对氧化钙，氧化镁的提取条件，利用乙二醇提取氧化钙后在催化剂存在下继续提取氧化镁，建立了电导法连续测定ＣａＯ，ＭｇＯ分析方法，可用于水泥熟料中游离氧化钙，氧化镁的测定。     

高比表面积介孔网状氧化镁的制备、表征及对废水中Pb(Ⅱ)的吸附性能和机理

以天然水菱镁矿为原料，通过"煅烧-水化-煅烧"的简单方法制备了高比表面积介孔网状MgO，且实验过程中无须加入任何试剂。系统性研究了氧化镁用量、吸附时间、吸附温度及pH对氧化镁吸附模拟废水中铅离子吸附性能的影响，揭示了吸附机理，并考察了氧化镁对多种离子的吸附效果。结果表明：该氧化镁吸附剂具有188 m²·g^-1的高比表面积和0.85 cm³·g^-1的高孔体积，平均孔径为12.33 nm，其吸附动力学和等温线数据与伪二级模型和Langmuir模型高度吻合，表明重金属离子在氧化镁上为单层化学吸附。MgO介孔网状结构表现出对Pb（Ⅱ）的高吸附性能，最大吸附量为7 431.5 mg·g^-1，该数值远高于其他报道的基于MgO吸附剂的数值，铅去除率高达99.8%以上。介孔网状MgO的吸附机理主要是羟基官能团以及Mg（Ⅱ）与MgO表面重金属离子之间的离子交换所致。另外，该氧化镁可同时吸附多种离子，对Cd、Cr、Ni、As、Co、P、Se、Be、Bi、Cu、Fe、Mn、V、Zn、Al离子均具有优异的吸附性能。     

Flow injection determination of bismuth in urine by successive retention of Bi(III) and tetrahydroborate(III) on an anion-exchange resin and hydride generation atomic absorption spectrometry

Bismuth as BiCl₄⁻ and BH₄⁻ ware successively retained in a column (150 mm × 4 mm, length × i.d.) packed with Amberlite IRA-410 (strong anion-exchange resin). This was followed by passage of an injected slug of hydrochloric acid resulting in bismuthine generation (BiH₃). BiH₃ was stripped from the eluent solution by the addition of a nitrogen flow and the bulk phases were separated in a gas–liquid separator. Finally, bismutine was atomized in a quartz tube for the subsequent detection of bismuth by atomic absorption spectrometry. Different halide complexes of bismuth (namely, BiBr₄⁻, BiI₄⁻ and BiCl₄⁻) were tested for its pre-concentration, being the chloride complexes which produced the best results. Therefore, a concentration of 0.3 mol l⁻¹ of HCl was added to the samples and calibration solutions. A linear response was obtained between the detection limit (3σ) of 0.225 and 80 μg l⁻¹. The R.S.D.% (n = 10) for a solution containing 50 μg l⁻¹ of Bi was 0.85%. The tolerance of the system to interferences was evaluated by investigating the effect of the following ions: Cu²⁺, Co²⁺, Ni²⁺, Fe³⁺, Cd²⁺, Pb²⁺, Hg²⁺, Zn²⁺, and Mg²⁺. The most severe depression was caused by Hg²⁺, which at 60 mg l⁻¹ caused a 5% depression on the signal. For the other cations, concentrations between 1000 and 10,000 mg l⁻¹ could be tolerated. The system was applied to the determination of Bi in urine of patients under therapy with bismuth subcitrate. The recovery of spikes of 5 and 50 μg l⁻¹ of Bi added to the samples prior to digestion with HNO₃ and H₂O₂ was in satisfactory ranges from 95.0 to 101.0%. The concentrations of bismuth found in six selected samples using this procedure were in good agreement with those obtained by an alternative technique (ETAAS). Finally, the concentration of Bi determined in urine before and after 3 days of treatment were 1.94 ± 1.26 and 9.02 ± 5.82 μg l⁻¹, respectively.     

Kristallstrukturen von MgCr2O4-Typ Li2VCl4 und Spinell-Typ Li2MgCl4 und Li2CdCl4

Crystal Structures of MgCrO₄-type Li₂VCl₄ and Spinel-type Li₂MgCl₄ and Li₂CdCl₄ The crystal structures of the ternary lithium chlorides Li₂MCl₄ (M = Mg, V, Cd) have been determined firstly by X-ray single-crystal experiments. Li₂MgCl₄ and Li₂CdCl₄ crystallize in an inverse spinel structure (space group Fd3 m, Z = 8, a = 1 040.1(2) and 1 062.06(9) pm, structural parameters u = 0.25699(2) and 0.2550(1), R = 1.7 and 3.7% for 218 and 211 unique reflections). The Li? Cl distances of the tetrahedrally coordinated Li⁺ ions are significantly greater than calculated with Shannon's crystal radii ( > 238 ± 1 instead of 233 pm). Contrary to the results of X-ray powder data reported in the literature, Li₂VCl₄ crystallizes in the distorted spinel structure of MgCr₂O₄ type (space group F4 3m, Z = 8, a = 1 037.49(2) pm, R = 5.9% for 217 unique reflections). The decrease of the site symmetry of the octahedrally coordinated ions (V²⁺, Li⁺) from 3 m to 3m resulting in contracted and widened tetrahedral M₄ entities of the spinel structure is obviously caused by V? V metal—metal bonds (shortest V? V distance 366.2(7) pm).     

Synthesis and transformations of metallocycles. 9. Regioselective and stereoselective synthesis of al-substitutedtrans-3,4-dialkylaluminocyclopentanes catalyzed by (η5-C5H5)2ZrCl2

A new stereoselective method is developed for the synthesis of 1-chloro-, 1-alkoxy-, and 1-N,N-dialkylaminoalumino-cyclopentanes from -olefins, metallic magnesium, and aluminum halides (AlCl₃, RO-AlCl₂, R₂N-AlCl₂) in the presence of catalytic amounts of Cp₂ZrCl₂ (Cp=⁵-C₅H₅). The products from hydrolysis and deuterolysis of the Al-substituted 3,4-dialkylaluminocyclopentanes (ACP) have the threo configuration.For Communication 8, see [1].Institute of Organic Chemistry, Urals Branch, Russian Academy of Sciences, 450054 Ufa. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 6, pp. 1393–1397, June, 1992.     

Kinetics parameters in Mg2SiO4:Tb thermoluminescent material

This paper reports a first approach on the kinetics parameters of terbium-activated magnesium orthosilicate using various methods. A deconvolution has also used for taking into account a more complex glow-curve structure.

---

Zusammenfassung Mittels verschiedener Methoden werden in erster Näherung die kinetischen Parameter von terbiumaktiviertem Magnesiumorthosilikat ermittelt Zur Berücksichtigung einer komplexeren Thermolumineszenzkurve wurde auch eine Dekonvolution angewendet.

     

Nonclassical titanocene silyl hydrides

The titanocene silyl hydride complexes [Ti(Cp)2(PMe3)(H)(SiR3)] [SiR3=SiMePhCl (6), SiPh2Cl (7), SiMeCl2 (8), SiCl3 (9)] were prepared by HSiR3 addition to [Ti(Cp)2(PMe3)2] and were studied by NMR and IR spectroscopy, X-ray diffraction (for 6, 8, and 9), and DFT calculations. Spectroscopic and structural data established that these complexes exhibit nonclassical Ti-H-Si-Cl interligand hypervalent interactions. In particular, the observation of silicon-hydride coupling constants J(Si,H) in 6-9 in the range 22-40 Hz, the signs of which we found to be negative for 8 and 9, is conclusive evidence of the presence of a direct Si-H bond. The analogous reaction of [Ti(Cp)2(PMe3)2] with HSi(OEt)3 does not afford the expected classical silyl hydride complex [Ti(Cp)2(PMe3)(H)[Si(OEt)3]], and instead NMR-silent titanium (apparently TiIII) complex(es) and the silane redistribution product Si(OEt)4 are formed. The structural data and DFT calculations for the compounds [Ti(Cp)2(PMe3)(H)(SiR3)] show that the strength of interligand hypervalent interactions in the chlorosilyl complexes decreases as the number of chloro groups on silicon increases. However, in the absence of an Si-bound electron-withdrawing group trans to the Si-H moiety, a silane sigma complex is formed, characterized by a long Ti-Si bond of 2.658 A and short Si-H contact of 1.840 A in the model complex [Ti(Cp)2(PMe3)(H)(SiMe3)]. Both the silane sigma complexes and silyl hydride complexes with interligand hypervalent interactions exhibit bond paths between the silicon and hydride atoms in Atoms in Molecules (AIM) studies. To date a classical titanocene phosphane silyl hydride complex without any Si-H interaction has not been observed, and therefore titanocene silyl hydrides are, depending on the nature of the R groups on Si, either silane sigma complexes or compounds with an interligand hypervalent interaction.     

The reactivity of N,N-dialkyl-N-(3-phenylsulfinyltetrahydrofuran-2-ylidene)ammonium bromide

trans-Stereoselective electrophilic cyclization of (2R*,SS*)-N, N-diisopropyl-2-phenylsulfinylpent-4-enamide under the action of bromine afforded (3R*,5S*, SS*)-N-(5-bromomethyl-3-phenylsulfinyltetrahydrofuran-2-ylidene)-N,N-diisopropylammonium bromide. Its transformations under the conditions of hydrolysis, dehydrobromination, and hydride reduction were studied. Dedicated to Academician V. A. Tartakovsky on the occasion of his 75th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1485–1490, August, 2007.