芳香酸淋洗液的单柱阳离子色谱法测定碱金属,铵离子和烷基胺

研究了邻苯二甲酸、苯甲酸和对羟基苯甲酸３种芳香酸分别做淋洗液的单柱阳离子色谱法分离测定Ｌｉ＋、Ｎａ＋、ＮＨ４＋、Ｋ＋、甲胺、乙胺和正丙胺７种物质。３种芳香酸做淋洗液均可将７种物质分离开，且分离结果差异不大。在淋洗液浓度相同的条件下，邻苯二甲酸做淋洗液测定的检出限较低。选择３．０ ｍｍｏｌ／Ｌ邻苯二甲酸做淋洗液测得了上述７种物质的检出限和线性范围，并进行了叶面肥试样分析，７种物质的加标回收率在９６．４％～９８．６％之间。     

Study of silica supported PtxNi1-x catalysts by ion scattering spectroscopy

As supported Pt_xNi_1–x catalysts are used for hydrogenation reactions, it seemed necessary to assess the surface composition of the reduced samples. To approach the usual reduction conditions we applied in situ reduction in a reaction chamber (1 mbar H₂ up to 500 °C) placed in ultra high vacuum recipient (UHV: 10^–9 to 2.10^–10mbar). All ion scattering spectroscopy measurements were performed in UHV. Charging of the samples was avoided by electron bombardment (5 eV). The variation of the surface composition was determined after subsequent sputtering, thermal treatment at 500 °C and during oxygen adsorption. A comparison with previous results of surface compositions of binary alloys (polycrystalline foils [1, 2] and single crystals Pt_xNi_1–x [3]) is given.Dedicated to Professor Dr. rer. nat. Dr. h. c. Hubertus Nickel on the occasion of his 65th birthday     

SOLID STATE CHEMISTRY OF La_(1-x)Li_(x)MnO_3 AND RELATED COMPOUND

A series of perovskite type oxides La_(1-x)A_(x)MnO_3(x=0.1 for A=Li,Na,K;x=0.1～0.5 for A=Li)have been prepared by impregnation.Experimental results showed that the substitution of La~(3 ) by Li~ inLaMnO_(3 ?) greatly increased the selectivity to ethane and ethylene for theoxidative coupling of methane.Temperature-programmed desorption of oxygenproved the presence of oxygen vacancies in the oxide lattice.The higher Mn~(4 )/Mn_t ratio in oxide made the formation of oxygen vacancies easier on the oxidesurface.The general formula of the oxides is La_(1-x)Li_(x)Mn＇V＇_(y)O_(3-y),V=vacancy.     

Ion interaction approach to calculations of volumetric properties of aqueous multiple-solute electrolyte solutions

The ion interaction approach developed by Pitzer was used for the prediction of volumetric properties of mixed electrolyte solutions at 25°C based on parameters calculated from experimental data for single-solute electrolyte solutions. Such an approach was shown to be especially effective for application to the calculation of volumetric properties of natural hypersaline brines and of industrial electrolyte solutions of large complexity. The use of the latest recommended sets of volumetric ion interaction parameters for single electrolyte solutions and symmetrical mixing parameters for Na–K–Cl ion combinations considerably improved the precision of the density calculations of highly concentrated mixed electrolyte solutions and of various natural waters.     

Dense Sphene-type Solid Electrolyte Through Rapid Sintering for Solid-state Lithium Metal Battery

The sphene-type solid electrolyte with high ionic conductivity has been designed for solid-state lithium metal battery. However, the practical applications of solid electrolytes are still suffered by the low relative density and long sintering time of tens of hours with large energy consumption. Here, we introduced the spark plasma sintering technology for fabricating the sphene-type Li_1.125Ta_0.875Zr_0.125SiO₅ solid electrolyte. The dense electrolyte pellet with high relative density of ca. 97.4% and ionic conductivity of ca. 1.44×10^-5 S/cm at 30℃ can be obtained by spark plasma sintering process within the extremely short time of only ca. 0.1 h. Also the solid electrolyte provides stable electrochemical window of ca. 6.0 V(vs. Li⁺/Li) and high electrochemical interface stability toward Li metal anode. With the enhanced interfacial contacts between electrodes and electrolyte pellet by the in-situ formed polymer electrolyte, the solid-state lithium metal battery with LiFePO₄ cathode can deliver the initial discharge capacity of ca. 154 mA·h/g at 0.1 C and the reversible capacity of ca. 132 mA·h/g after 70 cycles with high Coulombic efficiency of 99.5% at 55℃. Therefore, this study demonstrates a rapid and energy efficient sintering strategy for fabricating the solid electrolyte with dense structure and high ionic conductivity that can be practically applied in solid-state lithium metal batteries with high energy densities and safeties.     

气相色谱质谱法快速测定人血浆中克仑特罗

血浆样品经0.01mol·L-1盐酸和无水乙醇浸取,在碱性条件下用氯仿萃取,GG-MS-选择离子测量法测定,外标法定量。在选定的色谱条件下,盐酸克仑特罗的检出限为0.05ng,线性范围为0.1-100ng,方法的平均回收率为95.6％,RSD小于6.82％(n=6)。该法毋需衍生化,基质无干扰,简便可靠,适用于生物材料中克仑特罗的快速分析。     

亚氨基二乙酸—硅胶键合相的合成及其在核苷酸分析中的应用

以大孔微球硅胶（３０ｎｍ，８μｍ）为基体，经γ－氨丙基三乙氧基硅烷活化与间隔臂氯代环氧丙烷反应后，再与螯合剂亚氨基二乙酸键合，后者与铜离子（Ⅱ）螯合后，构成定位金属离子亲和色谱固定相。用磷酸盐缓冲溶液（ｐＨ＝７．０）作流动相，经紫外吸收检测（２６０ｎｍ）对核苷酸混合物进行了高效液相色谱分析，取得较满意的结果。     

Li2O·nB2O3-20%LiCl-H2O体系20℃过饱和溶液结晶动力学研究

用动力学方法对Li₂O·nB₂O₃-20%LiCl-H₂O体系(n=1,2,3)20℃过饱和溶液结晶过程进行研究，结果表明每一种溶液只析出一种固相，Li₂O∶B₂O₃=1∶1、1∶2和1∶3的氯化锂溶液分别结晶出Li₂O·B₂O₃·4H₂O, Li₂O·2B₂O₃·3H₂O和Li₂O·5B₂O₃·10H₂O，拟合并给出结晶动力学方程，同时对这三种固相的结晶反应机理进行了探讨。     

Thermoanalytische Untersuchungen an Schichtmaterialien: Der Einfluβ der Kationen auf das thermische Verhalten

Aluminium-free layered silicates of the metal silicate hydrate type (M-SH) comprise an interesting supplement to the well-known zeolite-like porous materials. Their specific properties allow these materials to be used as catalysts, adsorbents and ion-exchangers. Comparative X-ray diffraction and thermoanalytical investigations (TG and DSC) have shown that the thermoanalytical methods are useful to follow the process of structure formation of ilerite. The interlayer cations influence the properties of the different ilerites. In particular, the hydration behaviour of ilerite is affected. Thus, H⁺- and DTMA⁺-ilerite are stable up to temperatures of about 800°C, while the as-synthesized Na-form loses water irreversibly at about 150°C, is dehydroxylated, and is then desomposed structurally at about 400°C. The course of the dehydration exhibits significant differences for the various cation forms.This revised version was published online in November 2005 with corrections to the Cover Date.     

NMR Study of the Stoichiometry, Stability, and Ligand Interchange of Silver Ion-Hexathia-18-crown-6 Complex in Binary Dimethyl Sulfoxide Solvent Mixtures at 300 K

Proton NMR was used to study the complexation reaction between silver ion and hexathia-18-crown-6 in a number of binary mixed solvents of dimethyl sulfoxide with acetonitrile and methanol. Formation constants for the resulting 1:1 complexes in different solvent mixtures were determined by computer fitting of the chemical shift-mole ratio data. The influence of solvent composition on the stability of the resulting complex is discussed. The exchange kinetics of Ag⁺-hexathia-18-crown-6 in 70-30 wt.% dimethyl sulfoxide-acetonitrile and 75-25 wt.% dimethyl sulfoxide-methanol were studied by proton NMR line-shape analysis. In both solvent mixtures, the exchange of thiacrown ether between the free and complexed sites was found to proceed via a dissociative pathway. The exchange rates and the activation parameters E _a, H , S, and G for the ligand exchange were determined and the influence of solvent properties on these parameters discussed.