利用循环伏安法模拟技术理解电极过程可逆性**

循环伏安法测定电极过程可逆性实验在仪器分析实验中有着重要的意义。现行的实验设计中一般将铁氰化钾作为氧化还原反应研究的对象。由于铁氰化钾/亚铁氰化钾的氧化还原过程在电化学上可逆,学生通过实验很难理解电化学不可逆的过程,不易区分可逆和不可逆过程。本文利用循环伏安模拟的方法,通过改变电子转移速率常数(k0),得到不同的循环伏安谱图,结合课本上对于可逆性的判据(Epa-Epc=0.056 V/n,ipaipc≈-1)来解释不同的电子转移速率对于电极过程可逆性的影响。     

Analytical theory for ion transfer–electron transfer coupled reactions at redox layer–modified/thick film–modified electrodes

Electrodes modified by liquid films or plasticized polymeric membranes containing a redox species offer valuable alternatives for the study of ion transfers and bimolecular electron transfers at liquid–liquid interfaces with conventional electrode arrangements and stable interfaces. The ion-to-electron (or electron-to-electron) transducer affects the electrochemical signal, complicating the accurate analysis of experimental data. This can be reduced through the use of an electrode surface-attached redox species of well-defined electrochemical behaviour. As will be demonstrated, the voltammetry of these systems show significant deviations with respect to individual charge transfers, which must be considered for appropriate diagnosis and quantitative analysis. For this, a simple analytical theory is presented here, deducing mathematical expressions for the current–potential response, as well as for the potential difference at the two polarized interfaces, the surface excess of the redox species and the ion interfacial concentrations.     

Kinetics of D,L–Lactide Polymerization Initiated with Zirconium Acetylacetonate

The kinetic of D,L-lactide polymerization in presence of biocompatible zirconium acetylacetonate initiator was studied by differential scanning calorimetry in isothermal mode at various temperatures and initiator concentrations. The enthalpy of D,L-lactide polymerization measured directly in DSC cell was found to be ΔH=−17.8±1.4 kJ mol⁻¹. Kinetic curves of D,L-lactide polymerization and propagation rate constants were determined for polymerization with zirconium acetylacetonate at concentrations of 250–1000 ppm and temperature of 160–220 °C. Using model or reversible polymerization the following kinetic and thermodynamic parameters were calculated: activation energy E_a=44.51±5.35 kJ mol⁻¹, preexponential constant lnA=15.47±1.38, entropy of polymerization ΔS=−25.14 J mol⁻¹ K⁻¹. The effect of reaction conditions on the molecular weight of poly(D,L-lactide) was shown.     

Application of Ionic Liquids in Electrochemistry—Recent Advances

In this review, the roles of room temperature ionic liquids (RTILs) and RTIL based solvent systems as proposed alternatives for conventional organic electrolyte solutions are described. Ionic liquids are introduced as well as the relevant properties for their use in electrochemistry (reduction of ohmic losses), such as diffusive molecular motion and ionic conductivity. We have restricted ourselves to provide a survey on the latest, most representative developments and progress made in the use of ionic liquids as electrolytes, in particular achieved by the cyclic voltammetry technique. Thus, the present review comprises literature from 2015 onward covering the different aspects of RTILs, from the knowledge of these media to the use of their properties for electrochemical processes. Out of the scope of this review are heat transfer applications, medical or biological applications, and multiphasic reactions.     

Single‐Molecule Study of a Plasmon‐Induced Reaction for a Strongly Chemisorbed Molecule

Chemical reactions induced by plasmons achieve effective solar‐to‐chemical energy conversion. However, the mechanism of these reactions, which generate a strong electric field, hot carriers, and heat through the excitation and decay processes, is still controversial. In addition, it is not fully understood which factor governs the mechanism. To obtain mechanistic knowledge, we investigated the plasmon‐induced dissociation of a single‐molecule strongly chemisorbed on a metal surface, two O₂ species chemisorbed on Ag(110) with different orientations and electronic structures, using a scanning tunneling microscope (STM) combined with light irradiation at 5 K. A combination of quantitative analysis by the STM and density functional theory calculations revealed that the hot carriers are transferred to the antibonding (π*) orbitals of O₂ strongly hybridized with the metal states and that the dominant pathway and reaction yield are determined by the electronic structures formed by the molecule–metal chemical interaction.     

Theoretical Aspects of a Surface Electrode Reaction Coupled with Preceding and Regenerative Chemical Steps: Square‐wave Voltammetry of a Surface CEC’ Mechanism

Large number of lipophilic substances, whose electrochemical transformation takes place from adsorbed state, belong to the class of so‐called “surface‐redox reactions”. Of these, especially important are the enzymatic redox reactions. With the technique named “protein‐film voltammetry” we can get insight into the chemical features of many lipophilic redox enzymes. Electrochemical processes of many redox adsorbates, occurring at a surface of working electrode, are very often coupled with chemical reactions. In this work, we focus on the application of square‐wave voltammetry (SWV) to study the theoretical features of a surface electrode reaction coupled with two chemical steps. The starting electroactive form Ox_(ads) in this mechanism gets initially generated via preceding chemical reaction. After undergoing redox transformation at the working electrode, Ox_(ads) species got additionally regenerated via chemical reaction of electrochemically generated product Red_(ads) with a given substrate Y. The theory of this so‐called surface CEC’ mechanism is presented for the first time under conditions of square‐wave voltammetry. While we present plenty of calculated voltammograms of this complex electrode mechanism, we focus on the effect of rate of regenerative (catalytic) step to simulated voltammograms. We consider both, electrochemical reactions featuring moderate and fast electron transfer. The obtained voltammetric patterns are very specific, having sometime hybrid‐like features of voltammograms as typical for CE, EC and EC’ mechanisms. We give diagnostic criteria to recognize this complex mechanism in SWV, but we also present hints to access the kinetic and thermodynamic parameters relevant to both chemical steps, and the electrochemical reaction, too. Indeed, the results presented in this work can help experimentalists to design proper experiments to study chemical features of important lipophilic systems.     

Voltammetric Label‐free Immunosensors for the Diagnosis of Cystic Echinococcosis

Cystic echinococcosis (CE) or hydatid disease is a parasitic infection caused by Echinococcus granulosus. Early serodiagnosis and continuous monitoring of the disease is very important for medical treatment. Here, we report the detecting of both echinococcus antigen and antibody for the diagnosis of hydatid disease using square wave voltammetry (SWV)‐based immunosensors. The gold electrodes were functionalized using cysteamine/phenylene diisothiocyanate linkers and used for the immunosensors fabrication. The hydatid antigen and antibody immunosensors were constructed by the immobilization of either purified rabbit polyclonal antibody or recombinant antigen B (AgB), respectively on the functionalized gold electrodes surfaces. The detection in both cases was achieved by following the change in the SWV reduction peak current of the ferro/ferricyanide redox couple upon antibody or antigen binding. These immunosensors enabled the detection of echinococcus antigen and antibody within a concentration range of 1 pg.mL^?1 to 1 μg.mL^?1 with detection limits of 0.4 pg.mL^?1 and 0.3 pg.mL^?1, respectively. A preliminary application of the developed immunosensor was performed in spiked serum sample showing good recovery percentages ranging from 102 to 110 % for both hydatid antibody and antigen detection. This easy‐to‐use, sensitive, and low cost quantitative method holds great promise for the early diagnosis of hydatid disease and thus, better managements and treatment outcomes.     

Effect of Ionic Liquid Structure on the Electrochemical Response of Dopamine at Room Temperature Ionic Liquid‐modified Carbon Paste Electrodes (IL–CPE)

In this work 12 different ionic liquids (ILs) have been used added as co‐binders in the preparation of modified carbon paste electrodes (IL–CPEs) used for the voltammetric analysis of dopamine in Britton‐Robinson buffer. The ionic liquids studied were selected based on three main criteria: (1) increasing chain length of alkyl substituents (studying 1‐ethylimidazolium and ethyl, propyl, butyl, hexyl and decylmethylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquids); (2) nature of the counter ion (dicyanamide, bis(trifluoromethylsulfonyl)imide and hexafluorophosphate) in 1‐butyl‐3‐methylimidazolium ionic liquids; and (3) cation ring structures (1‐butyl‐3‐methylimidazolium, 1‐butyl‐1‐methylpiperidinium, 1‐butyl‐1‐methylpyrrolidinium and 1‐butyl‐3‐methylpyridinium) in bis(trifluoromethylsulfonyl)imide or hexafluorophosphate (1‐butyl‐3‐methylimidazolium or 1‐butyl‐3‐methylpyridinium as cations) ionic liquids. The use of IL as co‐binders in IL–CPE results in a general enhancement of both the sensitivity and the reversibility of dopamine oxidation. In square wave voltammetry experiments, the peak current increased up to a 400 % when 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide was used as co‐binder, as compared to the response found with the unmodified CPE. Experimental data provide evidence that electrostatic and steric effects are the most important ones vis‐à‐vis these electrocatalytic effects on the anodic oxidation of dopamine on IL–CPE. The relative hydrophilicity of dicyanamide anions reduced the electrocatalytic effects of the corresponding ionic liquids, while the use of 1‐ethyl‐3‐methylimidazolium hexafluorophosphate or 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (two relatively small and highly hydrophobic ionic liquids) as co‐binders in IL–CPE resulted in the highest electrocatalytic activity among all of the IL–CPE studied.     

Thermal stability and dynamic mechanical thermal analysis of epoxy thermosets possessing N,N′-disubstituted pyromellitimide units

Abstract

In this work, three epoxy resins including diglycidyl ethers of N,N′-bis(2-hydroxyethyl)pyromellitimide (DIDGE), bisphenol-A (BADGE), and polyethylene glycol (PEDGE) were isothermally cured by an amine curing agent possessing N,N′-disubstituted pyromellitimide units (denoted by DIDAM). DIDGE resin was synthesized from the reaction of N,N′-bis(2-hydroxyethyl)pyromellitimide with an excess of epichlorohydrin. Also, DIDAM curing agent was prepared from the reaction of pyromellitic dianhydride with an excess of ethylene diamine. Completion of the isothermal curing processes was approved by both Fourier transform-infrared spectroscopy and non-isothermal differential scanning calorimetry (DSC). The DSC traces showed only the phase transitions related to the thermal degradation of the resulting thermosets. According to the thermogravimetric analyses, the DIDGE/DIDAM thermoset showed higher thermal stability at temperatures above 425?°C than the other two thermosets. While BADGE/DIDAM and PEDGE/DIDAM thermosets showed about 70% weight loss in the thermal range of 400–850?°C, DIDGE/DIDAM thermoset was encountered with only about 40% weight loss. The glass transition temperatures (T_g ) of the resulting thermosets were determined using tan δ vs temperature plots obtained from dynamic mechanical thermal analysis. The T_g values of BADGE/DIDAM, DIDGE/DIDAM, and PEDGE/DIDAM thermosets were found to be 211?°C, 189?°C, and 81?°C, respectively.     

Sensitive Quantification of Fe(III) in Food Samples at Screen Printed Carbon Electrode Modified with Graphene and Piroxicam by Catalytic Adsorptive Voltammetry

A new disposable sensitive voltammetric sensor for the determination of Fe(III) based on a graphene (G) and piroxicam (Pir) modified screen printed carbon electrode (Pir/G/SPCE) has been developed. The developed method is based on accumulation of Fe(III) on the surface of the prepared sensor strip, formation a complex with Pir and subsequent reduction the adsorbed chelated Fe(III) at ?0.03 V (vs. Ag/AgCl) coupled with the catalytic enhancement of bromate. Characterizations of the modified electrode surface were performed by field emission scanning electron microscopy (FE‐SEM), energy dispersive X‐ray spectroscopy (EDX) and electrochemical impedance spectroscopy (EIS). Electrochemical behavior of the modified SPCEs was investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Under the optimum conditions, the catalytic voltammetric method exhibited linear calibration plot in the concentration ranges of 1–100 ng mL^?1 and 100–3500 ng mL^?1 Fe(III) with a limit of detection of 0.3 ng mL^?1. The sensor strip displayed good reproducibility with 1.7 % relative standard deviation (RSD%). The developed method was successfully applied for the determination of iron in food samples such as vegetables, fruit, and cereal.